Water Pump Setup For Hydroponic System || Vertical hydroponic system (Part 2)
HTML-код
- Опубликовано: 14 окт 2024
- Water Pump Setup For Hydroponic System.
SPECIFICATION :
Brand : Yamano WP-105
Voltage : 220-240 V
Frequency : 50 Hz
Power : 60 Watt
Max. Lift : 3 M
Max. Flow : 3000 L/H
The pipe is used for the pump has size 1/2 inch, I also use a stop tap to regulate the water that will be flowed
The water pump will be turned on from 6 a.m. and turned off at 6 p.m.
Interesting approach however I personally would prefer to tier a rack if i were to consider this type of system.
I’m considering adding a couple tiers stepping down into my 40gl rooted reservoir from an upper level early veg state. Essentially space was split like a loft and the top side utilizes 9 12”x48” trays where clones go to rock wool.
Its always interesting to see what others come up with. Nice work.
how did you manage the water flow in tubes when the tubes are laid horizontal with no slopes. pls tell.
As the water Is pumped In, the water level Inside the pipes rises and then drains out at the ends. If the power or the pump fails, there will always be water left inside the pipes. I guess It adds a level of safety. :)
Is it possible to grow using normal fertilizer, plz inform me,
nice video, can I ask what what planting media u are using? thank you
Looked like a small piece of rockwool
What size piping are you using and the length of this system?
What is the quantity of water to be added to reservoir in vertical tower
Bro, I am planning to make hydroponic system with 2.2m height. What size of pump you will recommend me bro?
Get a 1700gph or larger.
Mantap menginspirasi banggg👍👍👍
..Mas.essa.Bonba.Acho.qe.ta.Pichando.muita.Agua...tinha.qe Ser.500..ml..em.uma.hora..valeu.parabens.muito.Top..
hadir menyimak
Àoa nice video Allah bless you and your family ❤️🌹👍🏻❤️🌹👍🏻 in
What if power gone for 24 hr
Then go for a different setup where there will be standing water in the pipes even if it's not being actively pumped