Jet Airlift | Hamburger Mattenfilter | DIY | Tschechischer Luftheber
HTML-код
- Опубликовано: 3 окт 2024
- What is a Czech Airlift and do-it-yourself Video
All My Tschech. Luftheber | Hamburger Mattenfilter Videos:
• Tschech. Luftheber | H...
Details:
Riser - 20cm plastic tube, diameter 20mm
filter output - 10cm plastic pipe 20 mm diameter
pressure chamber pipe - 10cm plastic tube with 25 mm diameter
Pipe fitting 90 °, 20 mm diameter
two sealing rings
Aquarium Elbow
PVC glue, sandpaper, small saw, drill - 1 mm and 5 mm
Technik Test Videos:
• JUWEL RIO 180 LED | De...
• JUWEL HeliaLux Day + N...
• Resun LP-60 | Low Nois...
• JUWEL SmartFeed - Prem...
• JUWEL HeliaLux Spectru...
• ExoTerra Full Moon 😡#E...
• Terra Plus Terrarium |...
• Der Aquael Mini UV Tes...
• Lucky Reptile Thermo C...
• Foggy | Hobby Ultrasch...
• 4 Innenfilter - Nano-A...
• Night Sky LED Set im T...
• Juwel BioFlow & Filter...
• Osmopower 2.0 | Umkehr...
• Juwel SmartCam im Test...
• Tropica CO2 System Nan...
Support this channel with your Amazon purchase.
There are no additional costs when shopping via Amazon Links.
🛒
Mattenfilter: amzn.to/2gutZgo
Tangit: amzn.to/2h6ZGN3 #Tangit
Schlauchverbinder: amzn.to/2gusgb4
Kamera - amzn.to/2YrX0yL
Action-cam - amzn.to/2VEnTxZ
Microphone - amzn.to/32TMXWw
♥️ goo.gl/eBLrbL
👍🏽 Like what you see
🔔 Up to date
✉️ terraquaberlin@gmail.com
Don't click this - www.youtube.co...
creativecommons...
tlh-info.de
creativecommon...
Interpret: incompetech.com/
🦎🌿 🏠 terrarienbau berlin 2016 ©️
Wow good job man! Thanks for the vid. It really helped a lot. I'm really surprised at the the water output. I thought that because the holes were so small and the inlet for the air was so small. You were going to have a small amount of water come up. But I was completely wrong. I'm actually pretty amazed to be honest.
Der erste gute Beitrag zum Thema Filterbau bzw. Zubehör! Auch die Qualität des Betrages zeigt handwerkliches Können! 😀
Ahoi Jens und vielen Dank dass höre ich gerne...Grüße aus Berlin 🤓
wow man, this is by far the most useful video about airlift pumps. Thank you for sharing!
You really are a master, thank you for sharing this bright video
Great Idea for my Aquarium! Thanks
Nicely done
I've been using one of these since 2011 and there awesome
Thanks a lot for this video. Just managed to make one myself and we are pumping in around 400ltr/hour air and getting an out put of 600ltr water/hour. Thats amazing.
This is the best instructional video I have ever seen. So clear and concise. Have you watched the video with diagonal holes? Apparently it increases output. Congratulations again on a great video.
Thank you very much. You made my day ;)
Yes, I know the video. I have tested this diagonal variant and you can see this in my next vid...I'm working on it.
Like ALL the other people who were new to this...or were struggling with it...i thank you DEARLY for the education... /i am trying to make one that will suck up water from the shallow water in my bucket...up to a DIY drip ring...i made one like yours,...out of things i had around the house..but its not perfect.. it cannot move water from low to high...you gotta kinda tilt it so that it doesnt have to work as hard...and is closer to the top of the water...
i have an idea that will make this WAY more effective. First off have ALLL the parts this gent has...but my idea is to add a SECOND pressure chamberi thought i was smart and could make an outer pressure chamber that was bigger...blowing thru a smaller hole to up the output to make this thing WAY more powerful...but looking at the parts...you can only make the pressure chambers the same size.only diff is one is 25 mm and the bigger one 30mm....so i think the determining factor to UP the power on this thing...is to have the main air in 5mm...then the hole between pressure chambers..3mm..so that there is a significant build up of pressure..So instead of using a 10 CM for the main one..i may use 2 12 cm ones.. but ALL my problems are TOTALLY solved now Thanks to YOU good sir so... thanks for inspiring me with your AWESOME build man!!!!
Thank you very much! I've just built my first HMF and I'm testing it right now. I didn't have the tools to make the jet compressor but I'll add it because my flow is not as strong as yours. While building it I had an idea: do using a wider opening (something like a bell) where the bubbles are generated, could increase the amount of water sucked into the tube creating a higher pressure and even more flow?
Actually I tried it yesterday using a empty bottle I found home. It didn’t work. Actually the “bell” makes it incredibly noisy because the bubbles hit it and increase the noise.
Then I did another one using a simple thin pipe and instead of the jet I simply put the air tube inside, punched some holes in it and it works awesome. I’ll share some photos and videos of it :)
It's amazing how effective these are with just air!?!? Great video !✌️☮️🐟
Hi Fishy Life and Thank you :)
These are very effective and run only with an Air Pump or Compressor.
Very nice video.
Ahh finally the Germans .the best minds in the world...please , please..make more videos .. the world needs the German technical minds desperately..
Ahoi Hotbird3 Thank you so much for your comment 😂
عالی
🌺🌺🌺🍀🍀🍀🌷🌷🌷👍👍👍👏👏👏
Wow! i am amazed.. i can create one for my Koi pond.. Thank you for sharing this amazing video.
hi is been a year comment.. may i ask is it doing great? for ur koi?
Great video, thank you! Built two today for my new 29 planted.
Good
Thank you sir
Very well presented
Hello Giobel Koi Center. Thank you very much ;D
Tqvm. :)
Hola, este sistema sirve para cultivo hidropónico?
Wow Wonderfull
wow!
I just made one, the result is amazing
Thank you so much sir!
Great video, thanks!
My new project. thanks for sharing!
Thank you...Im curious about it !
Thanks.. Danke
thanks for sharing ill be using this jet airlifto to power my 800 gallon koi filtration system
Secure the paper to the tube with tape and you will get a mutch better result with the holes in line.
👍
that green tube connect from what to what? what if increase the height of the pipe, will pump works?
you didn't show how high it can go.. or different size tubes... no theory
Watch my other Czech Airlift Vids 😉
ruclips.net/p/PLI_STON0ETA585wqBl3T9KUQo9Lp28Lgs
Terima kasih. Mantap.
Ciao, ma a cosa è attaccato il tubicino? Grazie
👍
waow! quiet and constant...fantastic work. The flow looks very strong for an air-lift, what size air pump are you using?
Hi Jason and Thank you...
Im using an Air Compressor
watch:
ruclips.net/video/502MO1vrcok/видео.html
😉
How much will this lift
watch this :)
ruclips.net/video/GiRST3OEtOk/видео.html
Moin hast du das auch auf deutsch hochgeladen was ist das für ein rohr, Elektrokabel-Rohr oder so? Aus was wurde die Druckkammer gemacht? den Kleber hab ich schon gefunden :)
Ahoi Peter Wiesner das ist ein PVC Rohr aus dem Baumarkt „Sanitärabteilung“ auch Kleberohr oder PVC-U Rohr genannt. Für die Druckkammer kannst du auch ein PVC Rohr mit höherem Durchmesser nehmen. Es gibt aber auch ähnliche Produkte die sich genauso gut verarbeiten lassen. Einfach mal durch die Sanitärabteilung stöbern dort sollte alles zu finden sein. 👍
muss Morgen mal bei ein anderen Baumarkt gucken, Die Mitarbeiter Verstecken sich immer wenn man was Such,t und wenn dann Schicken die ein zu den Fall Rohre :) wie sind den die Durchmesser von den Rohren Foto mach ich auch noch :) Vielen Dank
is 400l/h your maximum flow rate with the 4W/200mbar air pump or does the size and length of the pipe play a role? What do you think you would need in terms of pump and tubing to achieve a flow rate of 2000l/h (i.e. for a 400l aquarium). Is there a formula?
and last but not least thank you very much for sharing this!! very well done.
Hello Iain Morrison, thank you very much.
With this version of a 20mm airlift, you have a maximum capacity of 35 cm = 600 l / h.
Data sheet 20 TLH
design:
-Outer diameter of the tube 20 mm
-Tube inner diameter 18 mm
-Sleeve height 50 mm from 32 mm pipe
-4/6 air connection screwed 90 degrees
-Possible lengths from 20 cm to 35 cm
output:
Max. Conveying capacity at 35 cm = 600 l / h
Max. Conveying capacity at 30 cm = 550 l / h
Max. Conveying capacity at 25 cm = 500 l / h
Max. Conveying capacity at 20 cm = 450 l / h
Min. Capacity (all lengths) = approx. 30 l / h
With a 32 mm airlift you have a maximum capacity at 50 cm = 1500 l / h
Datasheet 32er TLH
The Czech airlift was tested with a 350 l / h pump.
design:
-Outer diameter of pipe 32 mm
-Tube inner diameter 29 mm
-Sleeve height 65 mm from 40 mm tube
-4/6 air connection screwed 90 degrees
-Possible lengths from 35 cm to 50 cm
output:
Max. Conveying capacity at 50 cm = 1500 l / h
Max. Conveying capacity at 45 cm = 1400 l / h
Max. Conveying capacity at 40 cm = 1300 l / h
Max. Conveying capacity at 35 cm = 1200 l / h
Min. Capacity (all lengths) = approx. 80 l / h
You can use 2 airlift at the same time to double the flow.
Hi Thank you for the prompt reply, one last question, what are the details of the air pump used in the tests. I have a 2X200 l/h, 200mbar EHEIM. Is this enough to achieve the results you outlined?
Hello Iain Morrison,
I currently use an air compressor for my Jetlifts.
I used to have an Eheim 400 with 200mbar. This works well, but the pumps become weaker over a longer period of time.
Hi what make / model is your air compressor? Sounds very interesting but all the models I've seen are either overpowered or way too load for me.
do you have the Hailea 9720 by chance? the data on this model sound pretty good .
Newer powerheads are every efficient, and produce more flow per watt then any lift tube, including this curved tube with pipe wall air injection. Plus, powerheads are more quiet at the same capacity of flow. The only drawback to powerheads is that they produce induce some heat to the water, from both the impeller and the motor, compared to air injection. If you wanted your output to occur lower in the the tank, or to direct water current downward at a certain angle, you are severely limited compared to a powerhead.
At this scale true, however if you scale this up to pond size then that's when they become crazy efficient. Pumping 5000gph only using 40 watts is easy and then doesn't require separate aeration.
can't find that pvc bend in my local hardware store, would it work with 90 degree elbow? i realise this will probably slow down flow somewhat?
look for gray vinyl conduit - that is more curved. In the U.S. I havent been able to find the exact elbow he uses in this video
Hallo, nicht schlecht deine Arbeit, habe ich so eben abgekupfert. Gib nicht so viel von deinen Ideen Preis, sonst kann es passieren das du deine Idee bei E.B.A.Y. zum Verkauf wieder findest.
Ich sage nur Aquariumkühlung mit PC-Lüftern.
Hello, not bad your work, I have just copied off. Do not give away so much of your ideas, otherwise it may happen that your idea at E.B.A.Y. for sale again. I'm just saying aquarium cooling with PC fans.
Hello sir nice video it's very simple method of setting to water flowing good video but tell me what types of tank size want to require to best motor and I expected nature air setting not electronic motor how to set the nature air because of fish want to good oxygen therefor I asking tell me sir it's my request...thanking you.
Hello, I am very happy about your request
With a 20 mm diameter tube, lengths from 20 cm to 35 cm are possible.
Max. output at 35 cm = 600 l / h
Max. output at 30 cm = 550 l / h
Max. output at 25 cm = 500 l / h
Max. output rate at 20 cm = 450 l / h
Min. output rate (all lengths) = approx. 30 l / h
It certainly depends on which fish are cared for in the Aquarium and how much water you want to turn.
In general, a circulation of the aquarium water from 2 to 3 times an hour is recommended sometimes more. For example if you have a 100 liter aquarium you should pump at least 200 to 300 liters per hour.
You need a good pump to reach these levels. You will not reach the values if you have a weak pump and an efficient air lift, or a weak air lift and a powerful pump.
For best results I use an air compressor check my latest Video:
Low Noise Air Pump | Resun LP-60 | Infos & Test
ruclips.net/video/502MO1vrcok/видео.html
A small diaphragm pump with 200 mbar is enough to reach 400 l / h.
I hope I could help you.
Greetings from Berlin
Sehr gute Anleitung.
Eine Frage habe ich noch, wie wird der Lf entkalkt und saubergemacht, wenn die kammerhülse verklebt ist ?
Huhu Yvonne und vielen Dank dafür
Solltest du einen Oxydator im Aqua nutzen hast du bestimmt Wasserstoffperoxid zu Hause...damit gehts am besten ;)
Kiekst hier: ruclips.net/video/ozlSarRgXuY/видео.html
Tschechische Luftheber säubern | Clean Your Airlift | 🐠 🦐 🐸
@@TerrarienAquarienBerlin
Ne hab ich nicht. Die lf die ich nutze kann man zerlegen und dann sauber machen. Deswegen fragte ich. Erst o Ring Dichtung und dann noch verkleben kannte ich so nicht.
Absolut Klasse beschrieben und dargestellt. Daumen hoch.
Wie stark muss die Luftpumpe sein, dass das funktioniert? Ich hab hier ne alte Eheim mit 3,5W und irgendwie rappelt da nichts bei dem Rohrquerschnitt..
R Hutti Vielen Dank dafür.
Also ich betreibe derzeit alle meine Luftheber über einen Luftkompressor.
Sehr gut funktioniert hat die Eheim 400 mit 4W/200mbar, damit habe ich 2 der hier dargestellten Luftheber betrieben.
Na da wundert mich nichts mehr. Meine 100 l/h werden da wohl deutlich zu wenig sein ;) Ich änder das mal ;)
can you link the tools used mine keep breaking?
Ahoi【Arachno Skull】I listed the details in the description...
Do you hve a percentage increase? does it produce 10% more water flow or more? I mean it wouldn't be worth the effort for just 5% would it.
I only use Czech air lift and can only estimate the comparison. But believe me: once in use you do not want to miss it anymore...
So using this method we are pumping in around 400ltr/hour air and getting out 600ltr/hour water. So that's a 50% jump. Super awesome.
how high can it pump
Ahoi Mahmoud Khellasi
here the technical details:
ruclips.net/video/GiRST3OEtOk/видео.html
I have one question: After a few days running my brand new HMF inside an already established tank (I let both the old filter and the HMF one running together. Then I removed the old one), I noticed that biofilm is forming on the surface of the water inside the filter because it's very quiet there. Is it normal? Should I remove it?
Ahoy Almarma! That is normal. If only a small area is affected, there is no danger. What you can do is use duckweed or add a small air stone. I have the best experience with a slightly broken airlift. Just drill a small hole in the sealing to allow small bubbles rise to the surface. I hope I could help a bit.
@@TerrarienAquarienBerlin Yes! You helped me! Thank you very much :)
can i use a regular airpump?
Ahoi Mr. Juro Rems and yes you can 👍
@@TerrarienAquarienBerlin aw that was fast tnx ^_^
Sir, I have a pond of approx 16 feet deep. Can I left water from that. If so please give the pipe dimensions
You need a bigger Version, these are very effective for Aquariums.
Wozu eigentlich die 60 grad Schräge am Auslass des Lufthebers?
Ahoi Mietzerotze...das ist mal eine wirklich gute Frage und inspiriert mich fast zu einem neuen Video. Also das schräge Ende sorgt dafür dass der Wasserstrahl sich verändert, einen höheren Austrittsradius hat. Technisch gesehen hat das keine Auswirkungen. Ich werde dem mal detailliert nachgehen und berichten 😉
your airleft 50fet uper water dalyvary posible
watch here: ruclips.net/video/GiRST3OEtOk/видео.html
How high can this go?
jpaul kaito This depends on the pump...
how big is your pump?
Noobies At War ...400 l/h is Perfect !
Festool drill ?
🤔
👍
Ive bought three for my father. Hes a drill nut
You germans make the best tools.
BORG Aquatics great aquarium products too!
what is that elbow called and where to find it? i couldn't find in hardware store (home depot or Lowes etc)
Hello Alex Aydogan...
Search for PVC Pressure Pipe Fittings...
I did but could't find one in USA.Those I could find are either short and 90 degree elbows which doesn't worked well.
www.google.com/search?q=PVC+Pressure+Pipe+Fittings&source=lnms&tbm=isch&sa=X&ved=0ahUKEwil3_rdkp7XAhVSJlAKHd9lCigQ_AUICygC&biw=1920&bih=949#imgrc=8tLkJMbo42YyeM:
Alex Aydogan
The only thing that comes to my mind is that you can write me an e-mail and I will send you some. Unfortunately I can‘t tell you from here where you get some fittings in the US.
No worries. That 90 degree elbow just made in Europe. I have find a way to bend pipe with heat to make it just like that. Thank you for your help.
Alex Aydogan
Your welcome 🤓
watch here:
ruclips.net/video/2XHkPdIpe4Q/видео.html
I bend some pipes with hot Sand 😉
এইচটুও যদি পানি হয়. তাহলে পর্ণ্ডে এক্সট্রা অক্সিজেন এর দরকার হয় কেন.
It's no electricity used. ????????
Hello Robin Rabbi...you need an Air Pump or an Air Compressor ;)
hi I have 1000 litar tang .I want simpal idiya like this but no electricity. i trying but no success . My english not good hope you understand what I want
Only in Germany :)
Sehr gutes Video. ruclips.net/video/uZqBrVIWZLI/видео.html in diesem Video wird empfohlen die Löcher in einer Spirale anzuordnen. Hab es selber noch nicht getestet.
Sehr guter Hinweis, also vom ersten Eindruck fällt mir auf, dass er "nur" 20 Löcher bohrt. Von der Performance her sehe ich keinen maßgeblichen Unterschied, warum das besser sein soll kann er selber auch nicht erklären ;)
Ich werde diese Variante mal testen, vergleichen und ein Video dazu hochladen.
Danke für den Kommentar :)
ruclips.net/video/xSyvCAAGsXI/видео.html
If you know how to breed fish, you should make videos about that. There are no good videos on that subject.
guggst du : ruclips.net/video/qGjRl7Wwl14/видео.html
How many watts of pump ?
You can use an Eheim 200 with 3,5 Watt.