I would love to find an aluminum transmission case too. The plastic gets hot around the bearings and in just a few runs there is slop that allows the rear diff to walk around.
Thanks Mark, I appreciate it. More to come. I just love showing you guys what I like doing in my spare time. It's a great hobby. Not cheap... Lol but a great hobby
Looks like you have gotten bit by the Jato Bug lol. Once they are dialed( onroad .21/steel gears, good steering servo ,bell crank tricks to eliminate some slop, and some rear shock work) in they are super fun to rip around with. I have one setup with Mito 35 41015/9886 with a wheelie bar that I terrorize the golf course with ...damn thing is ballistic. Geared 20/40 on 2.8s
That screw pin that goes into the main line. That stupid thing even when I locktite the crap out of it and let it dry good before I lubed the trans and put it back together. It still backed out in the tranny and locked it up/bent the pin. Haha. Its a fun kit. I love my Jato. On its second trx 3.3.
Whats up Woogie!! Great video on the Jato here. We seem to be getting some anti traxxas comments cus of their SUE jobs, but yo know what, they know how to make a fast NItro, lol. Lets Make this Jato a killer bro!!!
I pay them. No attention.. great life tonight too. Keep it up buddy. You got a lot of people that look forward to your live stream. Just keep moving forward
Yo brother!! Love the videos!! Any chance you could do us all a video on tips,tricks for tunning nitros!? I wanna enjoy mine more then I do rn! So tips are helpful!! Thanks brother!
I've already done 15 minute tuning video. I posted it twice over the past several years. Just scroll back through my videos. It's pretty detailed. You could also check out JQ. He has a great tuning video as well. Mike's pretty much to the point like you and I would do it though
Woogie have a question on a nitro jato? Pick it up from a buddy and he had two different set of wheel on it. So i took the front wheels off and the bearings came with it and some sort of spacer? does the spacer go between the two bearings?? any help greatly appreciated thanks James
Yeah, they're supposed to be a little brass spacer or metal spacer in between the two bearings. Technically there's not a whole lot of weight up there. It'll probably be okay but you can get them on a main
I see the TX flag hanging in your shop. I live in the Austin area... about 10 minutes from Thornhill Raceway. Where at in TX are you from? Nice looking shop and Awesome looking RC's. Keep up the good work and keep making videos!!!
That's nice area out there. Its definitely changed out there in the last 10 years or so. Same goes for where im at, people keep moving further out to "the country". Seriously, good work on that double nitro truck you posted all those vids on!!! You got serious skills man!!
Hey Woogie! I cannot find the THS pipe you are using. Is there another pipe that you could recommend to me that would be it's equal? (Work with the novarossi header and fit like your setup.) I really appreciate all you do. Thank you so much.
@@woogienitro How can I tell if a novarossi pipe will fit size wise? I'm stumped! (I apologize for the newbie question! I know next to nothing about pipes and headers!)
GRANTS HOBBY VIDS ON YT!!! 132FT DRAG RACING (10TH SCALE) ON SQUARED TRACKS ON A PORT-A-TREE LIKE THE BIG BOYS!!! LAST JATO RACE PAID OUT $3100! $100 ENTRY FEE! LAST BIG ELECTRIC RACE PAID OUT $9200 CAAASSSH!!! 😤
I would love to find an aluminum transmission case too. The plastic gets hot around the bearings and in just a few runs there is slop that allows the rear diff to walk around.
Nice job woogie!!! I just love watching ypur videos.Stay Safe Stay Healthy! ✌
Thanks Mark, I appreciate it. More to come. I just love showing you guys what I like doing in my spare time. It's a great hobby. Not cheap... Lol but a great hobby
Looks like you have gotten bit by the Jato Bug lol. Once they are dialed( onroad .21/steel gears, good steering servo ,bell crank tricks to eliminate some slop, and some rear shock work) in they are super fun to rip around with. I have one setup with Mito 35 41015/9886 with a wheelie bar that I terrorize the golf course with ...damn thing is ballistic. Geared 20/40 on 2.8s
Great video. Yes. I like to see a Mugen on N Control RC track if they let you practice....good stuff
That screw pin that goes into the main line. That stupid thing even when I locktite the crap out of it and let it dry good before I lubed the trans and put it back together. It still backed out in the tranny and locked it up/bent the pin. Haha. Its a fun kit. I love my Jato. On its second trx 3.3.
Make a pin with an old drill bit. They are ideal!
Whats up Woogie!! Great video on the Jato here. We seem to be getting some anti traxxas comments cus of their SUE jobs, but yo know what, they know how to make a fast NItro, lol. Lets Make this Jato a killer bro!!!
I pay them. No attention.. great life tonight too. Keep it up buddy. You got a lot of people that look forward to your live stream. Just keep moving forward
Yeah dangerous to have a table full of screw boxes all open at once....one wrong slip. You be picking screws up for days....😂😂😂😂 good stuff
I'm thinking about getting me something again, I just don't know what. I like drag racing
Nitro more nitro smell the nitro love the nitro 👍👏🤜😜🇦🇺Tony Australia
Yo brother!! Love the videos!! Any chance you could do us all a video on tips,tricks for tunning nitros!? I wanna enjoy mine more then I do rn! So tips are helpful!! Thanks brother!
I've already done 15 minute tuning video. I posted it twice over the past several years. Just scroll back through my videos. It's pretty detailed. You could also check out JQ. He has a great tuning video as well. Mike's pretty much to the point like you and I would do it though
@@woogienitro heck yeah I'll go check it out and watch it this evening!!! Thank you brother!!
How the 1/5 scale baja going ?
Great video. what wheels/tires do you run on this T-word?😆
Jaco foams
Woogie have a question on a nitro jato? Pick it up from a buddy and he had two different set of wheel on it. So i took the front wheels off and the bearings came with it and some sort of spacer? does the spacer go between the two bearings?? any help greatly appreciated thanks James
Yeah, they're supposed to be a little brass spacer or metal spacer in between the two bearings. Technically there's not a whole lot of weight up there. It'll probably be okay but you can get them on a main
thanks woogie
I see the TX flag hanging in your shop. I live in the Austin area... about 10 minutes from Thornhill Raceway. Where at in TX are you from? Nice looking shop and Awesome looking RC's. Keep up the good work and keep making videos!!!
I'm at Canyon Lake
That's nice area out there. Its definitely changed out there in the last 10 years or so. Same goes for where im at, people keep moving further out to "the country". Seriously, good work on that double nitro truck you posted all those vids on!!! You got serious skills man!!
Hey Woogie! I cannot find the THS pipe you are using. Is there another pipe that you could recommend to me that would be it's equal? (Work with the novarossi header and fit like your setup.) I really appreciate all you do. Thank you so much.
You can still find Nova Rossi on road pipes. I would just look around. I don't have much experience with on-road pipes but I know they're out there
Also take a look at ECRM. They make an end bleed pipe for a 1/10 scale
@@woogienitro How can I tell if a novarossi pipe will fit size wise? I'm stumped! (I apologize for the newbie question! I know next to nothing about pipes and headers!)
Google 1/10 scale pipes see what pops up
@woogienitro Thank you so much, man! I just did that...found the manifold...and a pipe that (I think will work) You da man!
Whats the best engine to make your revo fast
Drop the OS TM.21 in it or go to RC renew on line and pick up a modified crank for the 3.3. check out my video with one in my jato
Thanking building a drag race jato too
Was the cow explosion near you??
No man. I'm in South Texas. That's up in the panhandle. I'm down by Mexico
@@woogienitro Ooo ok it was on the news and I thought you might of seen it.
Why ????? Because you can...enough said...
Ban Traxxas
Lol.. thanks for checking it out
GRANTS HOBBY VIDS ON YT!!! 132FT DRAG RACING (10TH SCALE) ON SQUARED TRACKS ON A PORT-A-TREE LIKE THE BIG BOYS!!! LAST JATO RACE PAID OUT $3100! $100 ENTRY FEE! LAST BIG ELECTRIC RACE PAID OUT $9200 CAAASSSH!!! 😤
0-60+mph in 2secs! 132ft! Some Jatos have gone 132ft in UNDER 2seconds.😤