Yeah the traxxas carbs have a certain charisma about them!! The entire trx set up is truly so simplistic yet high performance. The two clutch shoes always last and are dirt cheap to replace!! New fly wheel whenever you wanna swap motors. Love nitro, wish traxxas would do a revamp to the revo and tmaxx specifically!! Wouldn’t take much honestly
thank you man! Yes I remember you asking for some more TRACK vids! this one was just for you bro! There will be more, I just need more people to come and RC with, that was it could be even funner to watch.
About to finish a full resto of a 1st Gen Nitro Stampede. I got it used about 25 years ago. Had the stock .15 motor. I dropped in a 2.5R when they first released. Ran one full throttle test run straight into the only sign post within the whole field. Needles to say it exploded into several pieces leaving a debris field roughly 100 yards. It bent the chassis plate. I ordered all the replacement parts, mocked it all up and forgot about it until now. She's just about finished up and I can't wait to smell that nitro burning. This time I'll keep it away from any obstructions. Might even drop a 3.3 into it. I also dug out my OG TMaxx from storage. She's pretty much ready to go just needs to be freshened up. I had put in a Ciro .21 in her and had updated the chassis to the wider suspension and newer driveshafts right before I stored her away. There's just something special about driving a nitro truck that the electrics can't compete with. Ya they're faster and more convenient but the sound and smell of a nitro rig can never be replaced.
YES!! Finally a person who appreciated the regular older style controllers. I must say it's also one of my favorites! Also it's had far less battery drain or signal loss issues that the newer TQi radios where the antenna is not exposed. Thanks bro!! NitroGang!!
Great content, I have 3 basher 3.3 tmaxxes, AND....my new 3.3 Jato will be here Monday afternoon. It will be sickening sounds of 2 speed baby's in my neck of the woods.
I thought you edited that kid screaming when you were saying they left us high and dry 🤔 😆 keep up the great videos man! You're inspiring the nitro return!
@@SLC_nitro you gotta try their 12% oil content, even then I feel if it’s around in a decade I might go lower 9% oil for performance!! But the engines stay lubricated forever with their normal 12%!!!
I would either use VP or sidewinder. Bones brew is tech VP . I been using VP . Man I wish Trinity fuel was still around . Backyard basher was the best by Trinity back in the golden years of nitro.
What are some good nitro fuel to run in trx 2.5 and 3.3 engines nowadays? New to nitro, waiting on warmer weather to break in all 3 nitros I accumulated this winter. Also what percent and oil content to run?
Hey Hybrid was there ever a such thing as a b13 model tmax? I barely can remember but I thought the longer wheelbase was b14 and the b13 was the short wheelbase original.
hey dude! I've never heard of a b13 or b14 model regarding any traxxas nitro. They had model numbers which were usually 5-6 numbers, but b13 or b1 was never one of the sequences.
DID yOu KnOw!! 🎉🎉 the traxxas revo big block header sold separately with the carbon fibre lip for the spring is the exact same header for the O.S 0.21 TM for cheaper!! Buy just the engine and get your header from traxxas to save a gallon of fuel in cost
hey my dude!! I would highly recommend the Traxxas nitro for you. Ofocurse you know we love all nitros on this channel, but consider the great parts support and great electric start system on the traxxas over the VRX. BTW the jato is much faster and you will love the 2-speed.
Also, I know they aren’t the best handling machines!! In comparison but you have to expose the savage transmission hack for the splitting the top off!! The entire 7 screws and the entire TVP stays together!!! To grease and maintenance!!
hey man! I have switched to regular VP fuel now, a 20% nitro content, all is well! It cost a little more, but there is no other choice at this point. Anyway, the bones brew was still made with VP fuel, it's just a different color and comes in metal quarts.
I have a slayer pro, and I just installed a os 11kr carb. I'm having a bit of trouble getting the throttle linkage to link up correctly. It will run but the throttle arm bumps into the long arm coming from the servo. If there is anyone here with any tips I'd much appreciate it.
there is a grub screw in the sections that control the servo linkage throw, you need to mess around with how close and far you have the sections they should be little allen wrench holes
@@MaxwellBucknerthanks for the reply! Been doing that for a while now, guess I should have explained myself more. I also tried to reverse the linkage to where the throttle arm for the servo is opposite to the brake and reversed the servo direction, still works but rubs a bit on bottom of carb throttle arm. Maybe I can fiddle with the carb location, twist it a little left or right, as long as other people have done it with normal stock parts then I at least know I'm doing something wrong!
lol, one obvious reason, the EXTRA high MPGs will help you save money so you could buy more Nitros!! My 2008 Prius still gets 50+ mpgs at all times, you cannot beat that. Thats real world data and not some estimates which Mazda publishes.
@hybrid32494 ya but you have to drive a prius. No thanks. My car gets 38mpg and has some style and power when I want to have fun. Also has turbo noises. I'm not worried about saving $20 a week in gas especially if it means me driving a lame car that I hate.
hey my dude! Happy to have a fellow nitro bro on the channel, thanks for being a new subscriber too! Nitro 4 life as you can see man!! we keeping it real NItro here.
hey buddy! thanks for checking out this video! I highly recommend you pick up a nitro and have a good time, I guarantee it will be a good fun time! Join the NitroGang!.
Honestly it’s just what they do to their customers and their fellow businesses. They tell consumers of their nitros to run their fuel only, which wouldn’t be an issue if it wasn’t overpriced and very heavy on oil. Plus they have sued tons of businesses, like hpi almost lost everything because of a radio box design. Traxxas nitros? Amazing, I have 3 right now. But Just them as a brand aren’t great people, amazing customer support though
Thats me. I'm experimenting with pinion gears and realized 13t was way too low. I put a 18t in and now it goes strait. 20t was to hot, 13t made the tires spin. I'll find the sweet spot.
I don’t understand some people, I love all NITROs, I love all cool RC vehicles for that matter!! Long live NITRo and the NITRO Gang!!!
Thanks man!! Nitro been going stong on this channel and always will be! thanks for you support.
I am at work watching this, the love of nitro!
Have a great work day bro! I will be sure to yell 2-SPEED BABY for you later on today! NitroGang!
I love the Traxxas 3.3 !!!!!! Reliable and an adequate motor!!!
Yeah the traxxas carbs have a certain charisma about them!! The entire trx set up is truly so simplistic yet high performance. The two clutch shoes always last and are dirt cheap to replace!! New fly wheel whenever you wanna swap motors. Love nitro, wish traxxas would do a revamp to the revo and tmaxx specifically!! Wouldn’t take much honestly
My nephew and I love the track videos
thank you man! Yes I remember you asking for some more TRACK vids! this one was just for you bro! There will be more, I just need more people to come and RC with, that was it could be even funner to watch.
About to finish a full resto of a 1st Gen Nitro Stampede. I got it used about 25 years ago. Had the stock .15 motor. I dropped in a 2.5R when they first released. Ran one full throttle test run straight into the only sign post within the whole field. Needles to say it exploded into several pieces leaving a debris field roughly 100 yards. It bent the chassis plate. I ordered all the replacement parts, mocked it all up and forgot about it until now. She's just about finished up and I can't wait to smell that nitro burning. This time I'll keep it away from any obstructions. Might even drop a 3.3 into it. I also dug out my OG TMaxx from storage. She's pretty much ready to go just needs to be freshened up. I had put in a Ciro .21 in her and had updated the chassis to the wider suspension and newer driveshafts right before I stored her away. There's just something special about driving a nitro truck that the electrics can't compete with. Ya they're faster and more convenient but the sound and smell of a nitro rig can never be replaced.
Another awesome video 👌
I'm waiting on tomorrow be running the T-maxx 2.5 with some VP fuel !
Sounds like we are all about to having a Nitro T-Maxx Weekend!!!! SICK, Have a good time bro, don't kill it!! ahah.
I love the old school controller my eMaxx had that
YES!! Finally a person who appreciated the regular older style controllers. I must say it's also one of my favorites! Also it's had far less battery drain or signal loss issues that the newer TQi radios where the antenna is not exposed. Thanks bro!! NitroGang!!
Let’s make Nitro great again 💪 sickening 😃⛽️👍
Cool video. Love the onboard video. Would like to see Dan Ys RC8 with the O.S. again
Great content, I have 3 basher 3.3 tmaxxes, AND....my new 3.3 Jato will be here Monday afternoon. It will be sickening sounds of 2 speed baby's in my neck of the woods.
Been watching your vids for a year now love your content hope your around for years to come
Thank you, man really appreciate having you here as a longtime viewer, let’s hope this channel and Nitro never dies.
It’s offensive to see an electric car on this channel THIS IS NITRO SICKNING GANG
hey my dude!! Dont worry, nitro will never die on this channel!! Thats a claim I stand proudly behind .
@ I’m standing right with you on that one also
@ 2 speed babyyyyy
haven't had a nitro since 2007 when i was 13 just bought a used s-maxx 3.3 today getting back into it
TWO SPEED BABYYYYY
you got that right my dude! You can't kill a Traxxas 2-SPEED baby!~!!
oohhhh two speed baby rich and loud like always great video brooo
I thought you edited that kid screaming when you were saying they left us high and dry 🤔 😆 keep up the great videos man! You're inspiring the nitro return!
R.i.p bones brew. Hopefully they get the bottles figured out
I’m sure they will! Sidewinder has you covered. With 9 & 12 & 16% oil as well as 20,25,30 percent nitro
Ya I'm using Sidewinder basher 20/ 16 right now
@@SLC_nitro you gotta try their 12% oil content, even then I feel if it’s around in a decade I might go lower 9% oil for performance!! But the engines stay lubricated forever with their normal 12%!!!
For now I'm going to Torco 30/10 . The 20/16 I had from a break in fuel I was using. Sidewinder is good fuel tho for sure
I see your in staten island. Midland beach👏🏼 home sweet home. Brownie’s hobbies is gem. Make Nitro Great Again!
Love traxxas
gota love that nitro sound great video
Hey ALLEN! Happy nitro Saturday to you my dude!! Gotta the T-maxx!!
What rear wheel set up man it’s looking so dope 2 speed baby I got same one
There’s my orange jato that’s what I got. I just got a new engine again, and it’s my 3rd motor. I replace 6 motors now
I would either use VP or sidewinder. Bones brew is tech VP . I been using VP . Man I wish Trinity fuel was still around . Backyard basher was the best by Trinity back in the golden years of nitro.
What are some good nitro fuel to run in trx 2.5 and 3.3 engines nowadays? New to nitro, waiting on warmer weather to break in all 3 nitros I accumulated this winter. Also what percent and oil content to run?
Original nitro Revo here with a o.s..18tm small block. Always dug the f1 type laydown suspension on them. MNGA!! 😅
Hey Hybrid was there ever a such thing as a b13 model tmax? I barely can remember but I thought the longer wheelbase was b14 and the b13 was the short wheelbase original.
hey dude! I've never heard of a b13 or b14 model regarding any traxxas nitro. They had model numbers which were usually 5-6 numbers, but b13 or b1 was never one of the sequences.
Where that track at?
Great video bro 👌
Hi I have 2 tmaxs truck one raminator a rc 10 gt and a plane trying to get them all runing good
Again: Great onboard pictures!
I actually own a older model nitro Revo that has a super old os 18tm motor that's from really early 2000s
DID yOu KnOw!! 🎉🎉 the traxxas revo big block header sold separately with the carbon fibre lip for the spring is the exact same header for the O.S 0.21 TM for cheaper!! Buy just the engine and get your header from traxxas to save a gallon of fuel in cost
Part #5340x
t maxx 3.3 number one and I love t maxx3.3 so so so much and t maxx 3.3 is the best rc truck ever made and the t maxx 3.3 is cool.
Hey Mr H and Nitro gang would you take the Traxxas Jato or the VRX 1 .28???
hey my dude!! I would highly recommend the Traxxas nitro for you. Ofocurse you know we love all nitros on this channel, but consider the great parts support and great electric start system on the traxxas over the VRX. BTW the jato is much faster and you will love the 2-speed.
@@hybrid32494 Thanks bro I appreciate your feed back the Jato was my other option I will go with the Jato. have an awesome weekend bro.
We need a rematch between the T-maxx vs xmaxx
You Can Do It 💪 😁!!
Is that the 4909 short chassis ?
gotta love the nitro!
I love this video nitro is all i have for rc toys love them
Jato is sick I need one
I agree bro!! You definitely need a JATO, and every other nitro lol! But the jato and/or SLAYER pro is a great way to start. sickening!!
LOL...🤣 the 3.5 EcoBoost motors are pretty good
t maxx 3.3 is the king.
Also, I know they aren’t the best handling machines!! In comparison but you have to expose the savage transmission hack for the splitting the top off!! The entire 7 screws and the entire TVP stays together!!! To grease and maintenance!!
Also to set the shift points, because Hpi is keeping them around a long long long time! And the two speed on roads in our future if we do
What fuel are you using now??
hey man! I have switched to regular VP fuel now, a 20% nitro content, all is well! It cost a little more, but there is no other choice at this point. Anyway, the bones brew was still made with VP fuel, it's just a different color and comes in metal quarts.
@hybrid32494 right on, Thank you. I think i saw that at my local rc shop
I have a slayer pro, and I just installed a os 11kr carb. I'm having a bit of trouble getting the throttle linkage to link up correctly. It will run but the throttle arm bumps into the long arm coming from the servo. If there is anyone here with any tips I'd much appreciate it.
there is a grub screw in the sections that control the servo linkage throw, you need to mess around with how close and far you have the sections they should be little allen wrench holes
@@MaxwellBucknerthanks for the reply! Been doing that for a while now, guess I should have explained myself more. I also tried to reverse the linkage to where the throttle arm for the servo is opposite to the brake and reversed the servo direction, still works but rubs a bit on bottom of carb throttle arm. Maybe I can fiddle with the carb location, twist it a little left or right, as long as other people have done it with normal stock parts then I at least know I'm doing something wrong!
@@birdistheword1327 hard to say without pictures but im sure youll fixer er good i always find wrenching on rcs is half the fun
@@MaxwellBuckner yep I wish I could leave a picture here. I appreciate it, I'll let you know how it works out
Bro, tell me why I need a 2022 Prius over my 2020 Mazda3
lol, one obvious reason, the EXTRA high MPGs will help you save money so you could buy more Nitros!! My 2008 Prius still gets 50+ mpgs at all times, you cannot beat that. Thats real world data and not some estimates which Mazda publishes.
@hybrid32494 ya but you have to drive a prius. No thanks. My car gets 38mpg and has some style and power when I want to have fun. Also has turbo noises. I'm not worried about saving $20 a week in gas especially if it means me driving a lame car that I hate.
I'm about order me a jato an my son a rustler or slash for his birthday
Nitro Rules!!
hey my dude! Happy to have a fellow nitro bro on the channel, thanks for being a new subscriber too! Nitro 4 life as you can see man!! we keeping it real NItro here.
Get both awesome 👍
t maxx 3.3 the god.
t maxx 3.3 is the god and t maxx 3.3 is king all rc trucks rc cars.
I agree bro!! t-maxx 4 life!!!
I have always wanted nitro.
hey buddy! thanks for checking out this video! I highly recommend you pick up a nitro and have a good time, I guarantee it will be a good fun time! Join the NitroGang!.
I love nitros
🔥 it up
Comment GANG!! how you doing my dude! thanks for watching.
t maxx 3.3 is the god all rc cars.
Honestly it’s just what they do to their customers and their fellow businesses. They tell consumers of their nitros to run their fuel only, which wouldn’t be an issue if it wasn’t overpriced and very heavy on oil. Plus they have sued tons of businesses, like hpi almost lost everything because of a radio box design. Traxxas nitros? Amazing, I have 3 right now. But Just them as a brand aren’t great people, amazing customer support though
t maxx 3.3 is the god.
HECK YE bro!! I totally agree! T-maxx 4 life!! thanks for checking out this video, NitroGang!.
The os .21 is so not worth the money over the trx 3.3. Just my opinion. Traxxas did their research and OS just doesnt cut it
traxxas nitro rc cars be out ever.
t maxx 3.3 is the god and t maxx classic is god and 1/16 e revo vxl is the god and nitro rustler is the god and rustler vxl.
No need to tell me hybrid,I own 4 of them the only one i don't have is the 4tec snd the rustler.Let's make nitro great again.Just sickining.✌
nitro rc cars be out ever.
I agree my dude! Thanks for being here and supporting the NITROs out here! We will never give up, and the t-maxx will never be killed!
Arrma guy needs too practice his driving
Thats me. I'm experimenting with pinion gears and realized 13t was way too low. I put a 18t in and now it goes strait. 20t was to hot, 13t made the tires spin. I'll find the sweet spot.
@@jnyc10306 yeah you could easily beat those nitros with the right set up
I really don't like traxxas, big generic hunks of plastic. Lots of models very similar. Only thing going for them is parts availability.
t maxx 3.3 be out ever.
no rc car can bet t maxx 3.3.
No skills😂 I'll dust you bro 😊
You’re invited! Lets race bro, im up for it, no hating just a good time with RC!! Lol
t maxx 3.3 be out ever and nitro rustler be out ever 1/16 e revo vxl be out ever and t maxx classic be out and rustler vxl be out ever.
t maxx 3.3 the god.
100% true bro!!! Agree. NitroGang!.
nitro rc cars be out ever.