After quenching in oil tempering in an oven around 220 Deg C for 2hr (or less) would make the steel less brittle and may help hold a sharper edge for longer.
You can make the same thing with a closed end wrench. I've made 3 of the closed style. But now that I've seen that flat style I'm going to have to try and cut a box end wrench and bend it open.
I love the idea and the tools. But you need those for deep hollowing of undercut vases and such. Endgrain hollowing. Inside surface finishing. For regular side-grain wood bowls, I'd stick with the good old set of bowl gouges.
У Гриши Ганжа позаимствовал.... Мне тоже нравится эта музыка. А вот на счёт крючка, особая благодарность , да и вообще... у Лерыча к инструментам, особый подход, имею в виду изготовление.
Mooyoung Sono un tornitore fai da te ed ho una quarantina di sgorbie, ma questi due utensili mi mancano. Grazie per la tua dimostrazione, un lavoro eccezionale.
Hello 👋 my Lovely 😊 Very Good Very Nice your Working and your Video I Love ❤️ you and I Love your Channel thanks so much Goodbye my Brother next Video 🌹❤️
Research how to heat treat steel for beginners . Dipping in liquid cools the steel from red hot and hardens the metal so it will hold a sharp edge. You should also temper, look that up. Good luck
I'm sorry for the late reply. I just saw the notification. The liquid used is engine oil for cars. This is because using water can cause cracks due to rapid cooling of metal. And you can also use cooking oil that you use to make food. Cool in engine oil or vegetable oil after quenching. And it's good to temper the temperature of 220C for about 2 hours. It varies from metal to metal, but it would be good to search for hardening, tempering, and heat treatment. I hope it helps you. Thank you.
Very creative idea! I have seen people make spoon carving scores out of a closed end 25mm wrench, but never a ball bearing. Awesome!
After quenching in oil tempering in an oven around 220 Deg C for 2hr (or less) would make the steel less brittle and may help hold a sharper edge for longer.
You can make the same thing with a closed end wrench. I've made 3 of the closed style. But now that I've seen that flat style I'm going to have to try and cut a box end wrench and bend it open.
I love the idea and the tools.
But you need those for deep hollowing of undercut vases and such.
Endgrain hollowing.
Inside surface finishing.
For regular side-grain wood bowls, I'd stick with the good old set of bowl gouges.
Зачётный ролик. Спасибо .
Excellent work 👍
Thats great idea and tool.
Thank you very much. 😀
Работа отличная и музыка приятная, спасибо!
У Гриши Ганжа позаимствовал....
Мне тоже нравится эта музыка.
А вот на счёт крючка, особая благодарность , да и вообще... у Лерыча к инструментам, особый подход, имею в виду изготовление.
Superb craftsmanship
Thank you very much 😀👍
Very useful
Thanks for watching 😀
Great video - well filmed and those tools were very skillfully made.
Thank you very much 😀
TO : MR Andrew Moore
Very Good Very Nice 👍 thanks so much my friend goodbye 🌹❤️
Good joob,,,amazing skill👍🇮🇩
Thank you very much👍 😀
good idea
잘 만들었습니다
구 꾹 합니다.
자주 찾아뵙갰습니다.
감사합니다~ 😀
Great video 👍
Thank you very much 😀
Хорошие резцы и классная музыка!
Спасибо за просмотр! 😀😀😀
Could you weld a chainsaw tooth on a bar as its easy to sharpen.
Mooyoung Sono un tornitore fai da te ed ho una quarantina di sgorbie, ma questi due utensili mi mancano. Grazie per la tua dimostrazione, un lavoro eccezionale.
Grazie per aver guardato e divertito.
E grazie per il tuo supporto.😀
Amazing
Thank you :)
Hello 👋 my Lovely 😊
Very Good Very Nice your Working and your Video I Love ❤️ you and I Love your Channel thanks so much Goodbye my Brother next Video 🌹❤️
Hello🙌
Thank you so much for sending me your message of support👍👍👍
And thank you for watching 😀
무영공방
Welcome my Lovely 😊 thanks so much Goodbye 👋 next time 🌹❤️
Do you have any problem with catches with these tools? They look interesting and may consider making them I’d they are not prone to catching.
muy bueno
Exelente
Thank you. Have a nice day.😊👍
How thin is the cutter I made one but won't cut like yours just wondering what I did wrong
멋집니다
감사합니다 👍
What are you heating up in? Thank you.
Belo trabalho meus parabéns!👏👏👏👏
Muito obrigado.😀
creation😘
Thanks for watching.😀
👍👏👏👏
Thank you. Have a nice day.😀
Сколько будет стоить если заказать у вас "крючок"
Need this tools
👍👍👍👍👍👍💐💐💐💐💐💐💐💐💐💐
Hello🙌
Thank you 😀😀😀
Amazing Job. Do your sale this tools. Let me know.
We don't sell them. I made it for my own use.
Thank you for your interest and thank you for watching.😀😀😀
please explain about the liquid
Research how to heat treat steel for beginners . Dipping in liquid cools the steel from red hot and hardens the metal so it will hold a sharp edge. You should also temper, look that up. Good luck
thanks a lot for replying - but what type of liquid -water mobil or any edible oil please sir
I'm sorry for the late reply. I just saw the notification.
The liquid used is engine oil for cars.
This is because using water can cause cracks due to rapid cooling of metal.
And you can also use cooking oil that you use to make food.
Cool in engine oil or vegetable oil after quenching. And it's good to temper the temperature of 220C for about 2 hours.
It varies from metal to metal, but it would be good to search for hardening, tempering, and heat treatment.
I hope it helps you. Thank you.
thanks a lot sir my anxious cleared
А купить крючок можно?
Спасибо, что взяли с собой.
Извините. Я не продаю.
Спасибо за просмотр😀
You can buy them but they are expensive.
Se ve que el yunque no te importa mucho
uallll
Your instrumental music line taught me nothing.
Только, не пробуйте это делать из дешевых китайских подшипников..Только из наших, а еще лучше из старых советских..