I have a 2003 mitsubishi lancer and the engine went out like months ago .. i was to sell her until I found your videos at 2 o'clock this morning.. I've been watching them all day and even subscribed. dude you are awesome and thanka for inspiring me to pimp my ride on a poor man's/girls budget.
YES At 12:44, it feels rough on the pads for a few times before the paint is completely gone off the way. At 14:12, the paint on the pads' path was removed, and the other parts are remained.
i can't wait until it warms up a little... i love how cheap parts are for this car, and you have so many awesome videos, can't wait to start working on my Lancer :D
YES!! That was my plan for this year, but I have to save money for college. :/ Sad. Now I will have to save more money for the body kit for next year, hopefully. . It's crazy man, I want the body kit so bad, but I can't afford it. Well, just the matter of time now. cheers!
Wow! Almost 800k subs!!!! I remember following your videos a few years ago and you had a following of 10k. Great job, make more DIY vids!!! Congratulations! Cedias rule!!!
Haha Yes, but I need the rally type for the winter snow though. If my car is lowered, I'll be stuck in the snow. lol Besides that, I'm poor and broke right now. :D
! when you change rims to 17 inch , the speed read won't match the actual speed it will be more you can make sure with gps app on your phone and compare !!new rims looks good but it will not be smooth on the road as before and the gas consuming will increase you should consider that points bro all respect for your work
I don't know, if it the oxygen sensors, then you should change them. Otherwise try what you think. Here are the oxygen sensors problems: O2 sensors' rough idle: unstable idling, feel like a flood in the cylinders which gives no power when you try to accelerate it, seems to be fine once it's running for a while, happens every time when you start it up especially when it's cold... Go watch Lancer Fix | Rough Idle / Engine Light / O2 Sensors P0421 - Ep.1
I see. I don't about the A/C at all. It should work at any fan speed. Maybe changing the direction of air flow might help? You know the third knob to the right.
Have to agree with some others that paints on rotor is a bad idea. I hope no one replicate that, could be dangerous. Headlamp polishing can be done with toothpaste with clean rag, by hand. Wallet saved. Thanks for video
Oh sorry toothpaste is wrong, i think avocado skin and some sandpaper is better. MCM guys made a video about this. But you are right, polish stuff is the best if you can afford some
hi, mackey. you used a bolt when you took out the rear drum right? can you tell me the bolt size and thread information and where you got it? if you can just tell me the link that would be easier. thanks.
Yes, sir... at 14:12 Do you see that the paint on the pad braking area got cleaned off after I drove it for a while. It is fine. And the paint that is left will protect the rotor from getting rusty like this at 5:58 . That's I'm doing. haha :D
I need to polish mine :/ BTW I just did the Axles, Ball Joints, Brake Pads, Valve Cover Gaskets, Struts and Shocks, Tie Rod Ends, Rims and Tires, Spark Plugs, Coil Packs, and I'm about to re-paint and fix the interior. I have an 02 OZ Rally. I'm following your videos on things I didn't know like the valve cover gasket and Tie Rod Ends. BTW My A/C is messed up, only works when the fan is on "4", any ideas on what that could be?
Hi would just like to ask you've sprayed the front disk break with high temp silver spray paint right? Wouldn't the paint be removed because of the brake pads? Thanks
Great work man, am going to try this on my 1996 lancer, One more thing, can you please let me know from where I can get the electrical wiring diagrams for my Car?
VHT SP731 RED
eBay goo.gl/0eGE9c
Amazon amzn.to/2oAUiZT
VHT SP106 SILVER
eBay goo.gl/YwEmlE
Amazon amzn.to/2oAtFV2
Electric Buffing
eBay goo.gl/9J0Lic
Amazon amzn.to/2n9dD4e
7" Buffing Pads
eBay goo.gl/Obsqwh
Amazon amzn.to/2nClsuD
3" Buffing Pad Kit
eBay goo.gl/sJbV8K
Amazon amzn.to/2nVAVHY
M105 Compound
eBay goo.gl/aCjg73
Amazon amzn.to/2nIcnkZ
M205 Compound
eBay goo.gl/GhRhb9
Amazon amzn.to/2oGt3ue
1000 Sand paper
2500 Sand paper
eBay goo.gl/CMESok
Amazon amzn.to/2n94gSe
What kind of rims are those ?
Respect to any man who treats his car passionately
Great video mate
i would always call u out on ricer but the way u do stuff urself always automatically had u earning my respect
meaning keep it up i like ur atitude
I like how you take care of your car unlike people who neglect theirs
I have a 2003 mitsubishi lancer and the engine went out like months ago .. i was to sell her until I found your videos at 2 o'clock this morning.. I've been watching them all day and even subscribed. dude you are awesome and thanka for inspiring me to pimp my ride on a poor man's/girls budget.
Shavonne butler Cheers!
Hey thanks. I like to keep it clean for now. I might put some stickers on it in the future. Cheers!
YES
At 12:44, it feels rough on the pads for a few times before the paint is completely gone off the way. At 14:12, the paint on the pads' path was removed, and the other parts are remained.
Hi, thanks. There should now be a link in the description to the website that has your car wiring diagram.
Cheers!
He feel so happy fixing his own car I love it mate😉
Love your videos. Great angles, editing, informative, and entertaining. Keep up the excellent work.
i can't wait until it warms up a little... i love how cheap parts are for this car, and you have so many awesome videos, can't wait to start working on my Lancer :D
haha I can't wait too!!!
Cheers!
thank you very much im from France and i love your video about fixing car because you work good
My intention is to share stories about what I do to my Lancer... But I guess I kind of did tell people to do the same. lol
YES!! That was my plan for this year, but I have to save money for college. :/ Sad. Now I will have to save more money for the body kit for next year, hopefully.
.
It's crazy man, I want the body kit so bad, but I can't afford it. Well, just the matter of time now. cheers!
Wow! Almost 800k subs!!!! I remember following your videos a few years ago and you had a following of 10k. Great job, make more DIY vids!!! Congratulations! Cedias rule!!!
Haha Yes, but I need the rally type for the winter snow though. If my car is lowered, I'll be stuck in the snow. lol Besides that, I'm poor and broke right now. :D
All you do is with passion, great video!
The ride is smoother, no vibration. The car has more grip on the road. The rims are not light weight.
cheers
Oh yes, I'm thinking about a big project that will cover that too. Cheers! :D
Thnaks!
you have a beautiful car dude, keep your hard work making this videos I love them!!!
! when you change rims to 17 inch , the speed read won't match the actual speed
it will be more
you can make sure with gps app on your phone and compare
!!new rims looks good but it will not be smooth on the road as before and the gas consuming will increase
you should consider that points bro
all respect for your work
Nicely done
112 mph :0 great episode !!!
I will make more. Thanks!!
Yes, I have a big project in mind that will cover that. :D
Cheers!
Thanks!
Yes, the first few times the pads will try to wipe of the paint on the rotors. :D
Great video again !!!
Except for painting your brake rotors lolllll
Kidding, but it made me laugh so hard, I thought "ok, now he's gone crazy"
Nice work
I don't know, if it the oxygen sensors, then you should change them. Otherwise try what you think.
Here are the oxygen sensors problems:
O2 sensors' rough idle: unstable idling, feel like a flood in the cylinders which gives no power when you try to accelerate it, seems to be fine once it's running for a while, happens every time when you start it up especially when it's cold...
Go watch Lancer Fix | Rough Idle / Engine Light / O2 Sensors P0421 - Ep.1
Agreed!
Nice job on the vid. Great edits. I will try it out on my 2005 Mazda 3.
haha Yes! Thanks!
Yea, the grill. I'm thinking about a big project that will cover that too. But the only problem now is money $.
Amazing video bro!!
cheers
You should make a video on how to install fog lights man, it would really help me out thanks:)
Vernicia i dischi......ma prima li spazzola e poi li lava con acqua.....fottuto genio!
Very very NICE MAN
I see. I don't about the A/C at all. It should work at any fan speed. Maybe changing the direction of air flow might help? You know the third knob to the right.
Thanks, Cheers!
Thanks!!
Engineering level asian
Cool vid bro!
Good Job!! I do.
OMG! you mustn´t paint the brake disks!!!
Cheers
Well, if you tried everything else and didn't work, you should try changing the O2 sensors. I don't know that's pretty much what I think. haha
very nice Mitsubishi :d
Thanks! :D
No you have a NICE day mackie :D
เก่งมากๆเลยครับ ชอบๆๆๆ
55 ขอบคุณครับ
nice video bro
love you bro
nice ! now you need to change that grille, and it will be perfect.
Hey Mackey u should convert your rear drum brakes to disk brakes because it will be 100x better
Yes, I just wanted to polish them again. haha :D
Carmen Shannon It's fast enough. Just making nice that's all. What do you drive?
Nice job :)
Have to agree with some others that paints on rotor is a bad idea. I hope no one replicate that, could be dangerous. Headlamp polishing can be done with toothpaste with clean rag, by hand. Wallet saved.
Thanks for video
Yes, haha Cheers!
But not s good results as the polish winch is made for that job
Oh sorry toothpaste is wrong, i think avocado skin and some sandpaper is better. MCM guys made a video about this. But you are right, polish stuff is the best if you can afford some
I live that video
You got new fog lights?
Alight good luck with that ! XD
I think having the lug nuts red would have been cool.
that's nice
I work, man. 40 hours a week, night shift, factory job. Get pay just a little bit above the minimum wage. :D I'm still broke by the way.
Nice plus like
so when do we get to see the silver lancer thanks for all your lancer vids
larry turner No problem. I hope soon.
Excelente video ..Bro
hi, mackey. you used a bolt when you took out the rear drum right? can you tell me the bolt size and thread information and where you got it? if you can just tell me the link that would be easier. thanks.
+wut wat That would be a 5/16-18 bolt I think. You can also just hammer it out. Or try random bolt that you can find in your garage, etc. cheers
Yes, sir... at 14:12 Do you see that the paint on the pad braking area got cleaned off after I drove it for a while. It is fine. And the paint that is left will protect the rotor from getting rusty like this at 5:58
.
That's I'm doing. haha :D
Frank H Oh you can watch this video right here: ruclips.net/video/nbdJGCi29nQ/видео.html
DarkDragonWing ghhczzzfaaaaadffddsdfvvyynjlkijy
haha Thanks! :D Most of the parts are from eBay.com
:D Thanks!!
8:26 That torque wrench
O My Fucking God
+AVA ure a torque nazi
+Slava Basatski yeah c:
thats what you call a torque risk..all natural by feel..
😍😍😍🙌🙌lancer
ดิสและปั้มเบรคผมก็พ่นสีเหมือนพี่แม็กกี้ครับ
แต่ว่าผมใช้สีทนความร้อนครับเพาะว่า
บริเวณนี้เวลาวิ่งๆไปมันจะร้อนครับ
ผมพ่นแบบยิงทรายครับสวยแปลกๆดี
Yea
hahaha i feel you bro, im broke all the time, but i always have my ride custom lol
Do you think changing the grill. would be cool if you do :D
You must not paint disks this is bad but still your videos are great
yes :) cheers
ขอบคุณ พี่ชาย 😀😁😁
Just curious, are you going to put a body kit on it someday?
Thx dude.
I need to polish mine :/ BTW I just did the Axles, Ball Joints, Brake Pads, Valve Cover Gaskets, Struts and Shocks, Tie Rod Ends, Rims and Tires, Spark Plugs, Coil Packs, and I'm about to re-paint and fix the interior. I have an 02 OZ Rally. I'm following your videos on things I didn't know like the valve cover gasket and Tie Rod Ends. BTW My A/C is messed up, only works when the fan is on "4", any ideas on what that could be?
Hi would just like to ask you've sprayed the front disk break with high temp silver spray paint right? Wouldn't the paint be removed because of the brake pads?
Thanks
haha Cheers!
How are you so smart ? I'm 13 years old gonna be 14 and I wanna be just like you knowing all that stuff , my future goal is to make my own car (:
:) Learning, researching on the internet.
me too
Great work man, am going to try this on my 1996 lancer,
One more thing, can you please let me know from where I can get the electrical wiring diagrams for my Car?
I love this videos :D
Should get your self an air compressor and the proper tools for those sanding discs. Might make it a bit easier.
Yea, some day I probably will get one.
Blessings!
Love your videos. The only thing I dont understand is why do you always paint rotors? The paint will wear off immediately anyway?
Izzät Nadiri yes, the paint will come off where the brake pads are, but the rest remain painted and rust-free
The DarkDragonWing Hmm. That actually makes sense. Thanks for clarifying :)
Did you get a new color or car just wondering cuz you have a silver one now right
I used to have this blue one. I sold the blue and bought the silver.
Oh
ขอบคุณครับ
I know this is an old film, but have you considered to change from drums in the rear to disc brakes?
I would if I'm rich.
The DarkDragonWing :) I feel you brother!
What do you call those clips inside the brake caliper? Thanks
dope i gotta tape my lancer and show you
los discos si los pinto .. al frenar de rayan con las pastillas ??