Did you have overheating in your car as a symptom? I have the exact same looking leak but im confused why the leak would overheat my jeep when there's plenty of coolant still in the system and reservoir. Its making me think that something else is broken and adding to the pressure of the system and it just happens that the coolant neck you replaced is where the pressure is releasing this excess coolant. If you tell me your jeep was overheating even with coolant from that small leak then I'll know the two are related. Really appreciate it. Definite 👍
Was it overheating or did you just notice coolant leaking under the car? We have a 2013 with I believe the same problem but I just noticed coolant under the car. Coolant reservoir is still at correct level and I don’t see much evidence elsewhere of a leak besides underneath the cap assembly there
How do you bleed these cars I’m confused is it the traditional way like wait for bubbles to stop on radiator cap? And when does radiator open is it when the thermostat on half of the speedometer ?
Yeah I top it off and run it a bit and just put the cap back on and top the reservoir to the correct level and after a few times driving it will bleed itself. The. Just keep an eye on the reservoir to make sure it stays at the proper level.
No, not on mine. It had leaked down far enough that I lost no additional coolant. If yours isn’t leaking you’ll a little bit but I still wouldn’t drain it.
Ty you saved my butt with that part number
You’re welcome! I’m glad it helped
I just replaced mine yesterday on a 2014 Jeep Patriot 147,800 miles. Used a dremmel, worked out great! Thanks for posting!
@@ggazzara1115 awesome! Glad it was helpful!
excelente! lo que andaba buscando ayer se me rompió el de mi Jeep 😞
I feel so confident right now!... Let's see in a couple of hours.
thank you...just put one into my 2014 compass it was brittle ! New one went in 1-2-3 no problem $36 with tax
Awesome! I’m glad I could help
Thanks so mucho all the way from Acapulco mexico it really helped me a lot, and your boy was so cute 😂
@@ArtMoran-ce8hr thank you so much! I’m glad it helped!!
Excelente video. Muchas gracias
Big help man
What’s the name of that part
Thank you. It really helps me
You’re welcome! So glad to help
Did you have overheating in your car as a symptom?
I have the exact same looking leak but im confused why the leak would overheat my jeep when there's plenty of coolant still in the system and reservoir. Its making me think that something else is broken and adding to the pressure of the system and it just happens that the coolant neck you replaced is where the pressure is releasing this excess coolant. If you tell me your jeep was overheating even with coolant from that small leak then I'll know the two are related.
Really appreciate it. Definite 👍
It only had overheating issues because the coolant was low.
If there is air getting into the coolant system it will over heat it needs to be properly sealed I have the same problem
Take the whole bracket off to make the job much easier.
Thank you for the comment, however, I just prefer to have the bracket hold the part while I work on it.
Was it overheating or did you just notice coolant leaking under the car? We have a 2013 with I believe the same problem but I just noticed coolant under the car. Coolant reservoir is still at correct level and I don’t see much evidence elsewhere of a leak besides underneath the cap assembly there
How do you bleed these cars I’m confused is it the traditional way like wait for bubbles to stop on radiator cap? And when does radiator open is it when the thermostat on half of the speedometer ?
Yeah I top it off and run it a bit and just put the cap back on and top the reservoir to the correct level and after a few times driving it will bleed itself. The. Just keep an eye on the reservoir to make sure it stays at the proper level.
Do you have to drain the coolant before you replace the part? I'm about to do this myself.
No, not on mine. It had leaked down far enough that I lost no additional coolant. If yours isn’t leaking you’ll a little bit but I still wouldn’t drain it.
@@blackshirtbuilds7316 thank you!
What this neck fit on my 2015 patriot?
I’m not sure. But I’d guess if your upper hose looks like that it probably would.
Did you try this ?
@@silviamachado6879I'm about to right now.
Where do you got this part?
Advance auto parts.
Is there anyother way besides using a grinder to get that plactic clamp off the tubes? I dont have a grinder and need to replace mine today.
Yes, a small handsaw or something like that would work as well
Has anyone tried this on a 2016 Jeep Patriot ?
How is it holding up? Mine is about to give up and I’m ordering this same brand right now
It has held up great with zero issues
Brilliant, I got me one made of aluminum though ! Found it on ebay !
Would that part work on a jeep patriot
I’m having the same issues on a Jeep Patriot 2016