I have the Lincoln 180 mig welder and it turns on fan going and when I press the trigger nothing happens. No wire feed through no spark. I have checked the tigger and connection and those are good. Any help or ideas would be appreciated
Just bought one it gave up on me in the middle of the job after a while I try it and it work again I don't know if I should return it to home Depot or give it a chance
Lincoln makes good equipment that's what I learned on how to weld in school that was 20 years ago I use miller now that's because my work supplies it but Lincoln is A+ equipment
I have a lincoln 125 hd wire feed welder that doesn't weld in the A, B, C power selection but it does in D position. Only a small spark comes from A, B, C. It was working well. I looked for any loose cable connections and every looks ok. What I can do next. JOSE
Hi, I have a Lincoln SP-170T and the wire speed knob has broken. (The plastic stalk that runs from the back of the knob to the machine snapped) and I want to replace the plastic stalk how do I get on there to remove the remain stalk? Thanks in advance!
Why does my 135 only weld a few seconds before tripping its own breaker? Welded fine at first with gas set up. Outta gas so using flux core. Please help.
I used my Lincoln 140 for the first time today. After my first weld the spool feeder got stuck. I gave the trigger a few pumps and the POOF! A puff of black smoke came out the back and now it wont work. What happened?
i have a problem with my power mig 180c i didn't use it for a long time since i bought it, and now the problem is when i pull the trigger the wire feed continuously even i stop pulling it..... any help???
your trigger switch is likely filled with filings and dirt. If you unplug inside the machine one wire at drive rollers and it stops the issue (be careful) it's in the gun. The switch is a common switch to appliances and most microwaves have 3 inside. If cleaning the dirt does not do it, replace switch and check specs on the side to ensure correct amperage which shouldn't be an issue as it is a low amperage ckt anyway. Swicth should be no more than $10, most likely dirt.
I've got the lincoln 140HD that has a low spark output no matter the setting. Also "slows down"....Like undervoltage kin d of slow down. Sounds like it's struggling to operate. I am a 30 year electrical contractor and know I have good power. Any Idea?
These tips helped me remove some wire that was stuck in the gun hose. Thanks a bunch!
I have the Lincoln 180 mig welder and it turns on fan going and when I press the trigger nothing happens. No wire feed through no spark. I have checked the tigger and connection and those are good. Any help or ideas would be appreciated
Just bought one it gave up on me in the middle of the job after a while I try it and it work again I don't know if I should return it to home Depot or give it a chance
Lincoln makes good equipment that's what I learned on how to weld in school that was 20 years ago I use miller now that's because my work supplies it but Lincoln is A+ equipment
I have a lincoln 125 hd wire feed welder that doesn't weld in the A, B, C power selection but it does in D position. Only a small spark comes from A, B, C. It was working well. I looked for any loose cable connections and every looks ok. What I can do next. JOSE
Hi, I have a Lincoln SP-170T and the wire speed knob has broken. (The plastic stalk that runs from the back of the knob to the machine snapped) and I want to replace the plastic stalk how do I get on there to remove the remain stalk? Thanks in advance!
Why does my 135 only weld a few seconds before tripping its own breaker? Welded fine at first with gas set up. Outta gas so using flux core. Please help.
I used my Lincoln 140 for the first time today. After my first weld the spool feeder got stuck. I gave the trigger a few pumps and the POOF! A puff of black smoke came out the back and now it wont work. What happened?
Why didn’t you tell the viewers to use knurled wire feed rollers when using innershield wire?
I have a welder that turns on an when i press the trigger it just clicks and wont feed any idea of what that would be?
Did you ever figure out what it was? I'm having the same problem
My machine was fine then this happened to me to.
Same problem
Mine loses wire feed power just a couple seconds after I start to weld
Y
hi I have a mig welder 175 and the motor impulsor the whaier no work what happenig
what is the difference between spatter and splatter?
Both!
Nice video ! Thank you!
You literally never mentioned tension... am I missing something ?
Very Informative video great tips
i have a problem with my power mig 180c i didn't use it for a long time since i bought it, and now the problem is when i pull the trigger the wire feed continuously even i stop pulling it..... any help???
Please call our service dept. You can find the number on lincolnelectric.com. They will be able to troubleshoot the problem.
your trigger switch is likely filled with filings and dirt. If you unplug inside the machine one wire at drive rollers and it stops the issue (be careful) it's in the gun. The switch is a common switch to appliances and most microwaves have 3 inside. If cleaning the dirt does not do it, replace switch and check specs on the side to ensure correct amperage which shouldn't be an issue as it is a low amperage ckt anyway. Swicth should be no more than $10, most likely dirt.
My handy electric mig won't spark but turns on ,the fan kicks on but won't arc!
Mine to
Larry White fan comes on but won't spark its new
I've got the lincoln 140HD that has a low spark output no matter the setting. Also "slows down"....Like undervoltage kin d of slow down. Sounds like it's struggling to operate. I am a 30 year electrical contractor and know I have good power. Any Idea?
CHAPMAN ELECTRIC 7am
Mine just started doing this I have the pro 180 took two years to fail, I'm guessing control board as I have power in at B1 but nothing out at B2 ?
Great show! Thxs!
good video I like the tips Ty
Good info
great tips
My 180 Lincoln welder does not well it comes on but does not
give him a 10
We bought 255, its worst welding machine i worked with. Its made in Poland, maby thats why?
Lincoln 140 is absolute junk , I have one for sale cheap
How much