MATLAB Simulation of V2G, G2V Operation in Electric Vehicle Charger (Single Phase Model).
HTML-код
- Опубликовано: 11 сен 2024
- In this video, i am explaining about the MATLAB simulation of a bi-directional battery charging/discharging circuit capable of charging from the grid or dis-charging to the grid. This simulation can also be used as a demonstration of V2G, G2V operation present in the EV Charger. Control block diagram used for the simulation is also explained in the video.
Feel free to post your doubts in the comment section. For any other clarifications you can contact me at ashacademy01@gmail.com.
If you like my work, please consider subscribing to this channel. Thanks for watching.
Thank you so much for your sharing. Clearly you are not trying to make money with your videos as what other youtubers do. Everything you share here, including the parameters of PI controllers, inductance & capacitance, works well in my simulation. Thank you so much.
thank you very much,
the active and reactive are reveresed in the video.
Hi Sir! Can you kindly explain which equations or methods did you use to tune the PID controllers, e.g. Swing equation etc.
sir need help
could u please provide me the reference /research paper used for this simulation work?
many thanks, the vedio is very helpful
Why do you think EV manufacturers haven’t widely adopted V2G capability? Is it due to cost, or is it too complex a task to manage?
nice work...please upload simulation for V2V charging through dc link of two EVs
Sir, Can you explain which methods did you use to tune the PID controllers
So much helpfull video
Thanks
Sir, I want to add solar and wind energy also in this model and do energy management. Have you any model or any idea related to this . Please let me know. It's very urgent.
Hi can we talk about this i am currently working on this topic same as yours
am workin on the same as well we can share ideas
am working on a similar system we can share idea as well
Now I am currently developing my project on the same let discuss
@@thebosswhofixit8869 hi contact
A key question is how you got the parameters of each component, which is crucial for us to build a new model
Sir/ma'am, can you pls do the performance analysis and show me what will be the EFFICIENCY of the G2V model? actually i tried finding out the efficiency but while calculating I am getting the output power is more than my input power though i got the same values and waveform as you. Please help me out.
Thanks for sharing. Is there any related reference paper/book to be mentioned? Thanks for replying.
Can you use Dual active phase shift bridge converter in place of buck boost converter for V2G and G2V mode operation
seems like closed loop with two control ? is it better to make one closed loop ??
Hello, please how can we calculate the measurement component of the LCL filter
Hii pls help.
Connecting vgrid to pll is not happening on my software. Any reason ??
9:36 time reference in this video
Contact ashacademy01@gmail.com
@@TechSimulator hai sir.wil you please help me in doing my PhD research on ev v2g,g2v topic
Please suggest me from where you are choosing your converter
Battery voltage should decrease over time during V2G operation and vice versa.
Battery current should increase during V2G operation and vice versa.. isn't it?
Battery Nominal voltage is set to 160v but in the output, we are getting 172V
Insted of grid, single phase PMSM is connected, it will work or not?
I'm not getting the output I am getting same wrong output for both V2G and G2V mode I have checked the parameters thrice and there is no deviation from your model
contact me at my email ashacademy01@gmail.com
Sir in this model which dc dc converter is used?
Sir how much filter values and output capatacence and buck filter value i use for 400 v battery in v2g and g2v operation
which control algorithm is used here
Sir, how to get a variable DC link voltage from a boost converter... ???
great
Thanks
have you found related research paper?
@Tech Simulator Why is Iqref kept 0 and Idref given the value of dc bus controller in this simulation?
Because charger tracks only D-axis voltage
Sir which method have you used a for synchronization while V2G??
He used PLL that needs for synchronisation
Hello, can you explain how did you tune pi controller and overall design of voltage controller
trail and error
Sir how to design controller for front end?
Where is the email from where I can contact you, sir?
Something is not right in the active rectifier circuit. Mine is unstable and the circuit, values, and settings are per the video. The DC/DC section looks OK.
I should add the 2-level PWM block goes from zero to full duty cycle with an input swing of -1 to +1V. The input I see goes hundreds of volts plus and minus.
Whoops! Gotta use the right IGBT, the one with the diode. Then it works.
you can share the model at my email
Is phase locked loop (PLL) algorithm used here, sir?
yes
Sir Mera output exact nhi aa rha
Hai sir.i need your help in doing my research.will you help me
Sir can u explain why did u product the power and voltage
where did i multiply power and voltage?
Sir, I want to add wireless power transfer in this model . Have you any model or any idea related to this .
am working on a system like this we can share ideas
Sir can i get this model please?
Can we get project report of this project
i dont have
How can we make the same model but in phasor mode ?
you should use abc-to-dq0 transformations
can you help me making this ? give me your contact@@alexpilloni
Hi
I tried it but my waveform is different from yours. Also, can you share a reference paper for this work?
have you found related research paper?
You can share the model at my email
My simulations are not based on any research paper
Did you get the correct waveforms, i am facing the same issue.
@@prateek_jakhardid you get the waveforms
Hello sir, there iam getting some errors with PLL, is coswt is reactive?
Kindly mention the paper referred for this simulink .
have you found related research paper?
Sir I tried a lot ,but ibat and vbat are not getting like that u got
pls share the model at my email
@@TechSimulator ihave also not get that type of wave form help me out
@@TechSimulator Why is Iqref kept 0 and Idref given the value of dc bus controller in this simulation?
hello sir ,
i need simulink file
Hello Sir
Can anyone please share the file
If you start using that high inductance obviously you will get sinusoidal current input … input inductance is too huge
how to calculate the value of grid inductance ? min and max limit ?
send full cricuit
Wastage of time
Hello Sir i made this circuit but faced some problems.Please chck email
Thanks