a very nice introduction on plc, it was my first to learn this even ive seen this on my job as a mechanical technician hence electrical whose tinkering those. If some busted we yell on them, now i understand, i must do this on my own project, super thanks for the inputs.
When connecting to power supply you connected so called GROUND cable instead "earthing cabe" with is HUGE difference. This is big mistake because this green/yellow cable should be used in protective function ONLY. So (-) on power supply is not earth = you cant use green/yellow. Correct me if im wrong. BDW good thing RUclips has speed option because this lector wasting a lot of time
I got something so strange I have old logo 230RCo 6ED1 052-2FB00-0BA6 And USB cable I can connect to the CPU and upload and download But I have the new CPL Same v and same number I can't access to on it It ask me the new software version I don't know why
u are very good in teaching thanks for the training,pls my S7-200)CPU 222 wipe out initial set up program and the language was Italian while am from English speaking country so I will like to have the setting instruction thanks
I bought a house with this system. But i have a probleem, the lights outside wont go on anymore after i switched off and on the main power. Can i just connect q1 and q2 for constant power?
o gosh....a PLC=programable controller and will behave according whatever was programmed in it...it is not a dedicated "house lighting control system"....
What is this tutorial ??? First ....color coding of wires are wrong. Second ......why your using an expensive ''logo'' just to simulate a simple switching ???
horrible!.....yellow/green cable should only be used for PE (protection earth), not for DC GND....additionally she connects a RED cable to GND too...bad...blue or black are standards for GND....RED should be used for DC power supply....additionally she call a LED (i suppose with integrated resistor) a LIGHT BULB!....gosh!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Very well explained 😊
Beautiful explanation
Thanks 🙏
nice voice acting, it was easy even for me to listen her. I like it)
a very nice introduction on plc, it was my first to learn this even ive seen this on my job as a mechanical technician hence electrical whose tinkering those. If some busted we yell on them, now i understand, i must do this on my own project, super thanks for the inputs.
When connecting to power supply you connected so called GROUND cable instead "earthing cabe" with is HUGE difference. This is big mistake because this green/yellow cable should be used in protective function ONLY. So (-) on power supply is not earth = you cant use green/yellow. Correct me if im wrong. BDW good thing RUclips has speed option because this lector wasting a lot of time
you are right
green/yellow for ground/earth use
WHEN I SWITCH MY LOGO ON I SEE ONLY NO PROGRAM
WWHAT CAN I DO NEXT?
make sure the program is loaded before,, else during testing it might deleted ( its happed some time with comers )
Thanks
hi i need assistance, how can i get LOGO with Installation CD and cable to PC??
Need your communication media bcz i want to learn plc
I got something so strange
I have old logo 230RCo
6ED1 052-2FB00-0BA6
And USB cable
I can connect to the CPU and upload and download
But I have the new CPL
Same v and same number
I can't access to on it
It ask me the new software version
I don't know why
dear friend~do u want any Siemens electric equipment ? i can give the best price!
Can someone please explain the shortcuts for the following?
L+
M
?
L+ is Line+ aka 24V ( + ) and M is Minus aka 0V ( - )
Merci
how to connect siemens logo to pc??
nice
u are very good in teaching thanks for the training,pls my S7-200)CPU 222 wipe out initial set up program and the language was Italian while am from English speaking country so I will like to have the setting instruction thanks
I bought a house with this system. But i have a probleem, the lights outside wont go on anymore after i switched off and on the main power.
Can i just connect q1 and q2 for constant power?
o gosh....a PLC=programable controller and will behave according whatever was programmed in it...it is not a dedicated "house lighting control system"....
very messy & confusing towards the end
What is this tutorial ??? First ....color coding of wires are wrong. Second ......why your using an expensive ''logo'' just to simulate a simple switching ???
German engenering is the Best in the World
Du hast recht.
y en español quien puede traducir
udemy should involve native english speaker in their video-tutorials...
In French please
Password
horrible!.....yellow/green cable should only be used for PE (protection earth), not for DC GND....additionally she connects a RED cable to GND too...bad...blue or black are standards for GND....RED should be used for DC power supply....additionally she call a LED (i suppose with integrated resistor) a LIGHT BULB!....gosh!
Haha over complex solution to do anything
Arduino is much more versatile
in terms of creating unsafe unreliable junk, then definitely yes.
@@Sixta16 provided that you write in a clean way and if you do not need high speed arduino is perfect.