Check out the footage of the Gordon Murray T.50 that was at this show....different beast again 12.000 rpm . sounds like old school erly 90's f1 and it's a streetcar. mikes car is special.....but it has nothing on the sound of theT.50.
@@cliftongriggs1732 if you are referring to Mazda, this engine design is actually German that the Japanese copied. You have to thank the Germans for the zoom zoom
The shot of the steam coming out of the radiators being carried over the car in perfect streamlines was the most epic depiction of the power and precision of this project. Epic work!!
on friday it was without a doubt the loudest car at FOS, including F1 cars, but it had a few issues, not sure if he made some changes but on saturday and sunday it seemed a bit quieter, probably just me though
@@kaijuryuk rotaries are notoriously louder than a majority of piston engines btw... Having 3 cycles going through the same small port that opens up to 4-5" is essentially a massive megaphone that amplifies it even more lol.
In 2017 I was at a Cars and Coffee where the Gia Lai Team showed up. They are notorious for being very loud when they leave. I shot a video sitting on the curb about 10 feet behind one of their Aventadors as it bounced off the limiter for a solid 20 seconds. Every back fire felt like getting punched in the chest, and I felt the heat of every flame that spat out the back of it. My ears rang for the next few minutes after. A 3 rotor I saw at a drag strip was significantly louder from the stands than that Aventador from 10 feet. Calling it a monster does it absolutely no justice.
Rotary engines have ALWAYS been reserved for those who WANT TO UNDERSTAND them! Excellent source of power. I had a rx3 back in the day. 13b Weber carbureted….miss that beast!
What a machine and made it 10x better with that 20B swap. It looks like it's having clutch/trans issues and I remember Madmike running into them from his YT build videos. I'm sure he and the team will take their time sorting the car out after rushing to complete it in under the 100day build time. This is the most insane build in the world at the moment IMO.
they talked about it on the build series on mad mike ytb channel, they said it would probably not last the full FOS but then they would use it as much as possible
@@xViRUz7624 yup I remember that. pretty sure it's part 3 or 4 where it's mentioned. Plus they had to redo, from scratch a whole new turbo kit/manifold/shifter. Most customs builds need minimum of a year of shop time to build and in normal conditions, 2yrs total to be 100% dialed in. the fact they managed to finish a hybrid build where every single part is custom in 100days is absolutely mad!! just shows how dedicated MadMike and his team are on such a unique car build. Mind you, only rotary swapped 650s in the world..lol
@@patrickkdev oh you mean Ryan turek the drifter. Yeah I watched that entire build. I'd say that car is a level under this one. But absolutely epic build too.
I'm glad they did it and the noise was amazing but another rush job that just didn't seem to be set up properly like the madbul Compare these runs to Deane, Baggsy, etc. or his own in the MX5. There's a reason you don't see MR cars in FD
If you are a ricer boy and like obnoxious noise yes. If you like the music of a fine tuned engine exhaust and engine, the original P1 engine is just that.
@@vitalpandya7908 So what ? F1 cars are hybrid since 2014. The Lambo Revuelto is a Hybrid. The Ferrari SF90 is a hybrid. the Porsche 918 is a hybrid. Now go goggle them and learn cause you probably don't know anything about cars.
This man made my dream build come true. I always want to build a mid engine rotary. I wish Rob Dahm would have done it, but his AWD 4 rotor is badass too.
I will always love the rotary I had a rx7 (12a standard) Then another rx7 (12a heavily street ported) Then same rx7 with a 13B turbo, with add ons Then a rx 8(with decat exhaust and better intake) And they were all equal in own way My rx 8 I had the longest, nearly 6 years. And the best car I ever had The sound after the exhaust change on the RX 8 was just amazing
You lost me at RX8 is the best car. RX8 had a ton of issues from day one to the last day. The way they did the porting from factory was garbage. Very well known across the board the RX8 will always go down as the worst Mazda ever. I've owned the 1st and 3rd Gen. Both peripheral ported. Rx8 is pure garbage!!!
When he did that flick to make a U-turn really gives off that "Really? Right in front of my vehicle" Vibe from those rich guys parked up by the side lol
I’d like to thank Mike for building this car. I’m totally in love with it and completely obsessed with it. I can’t watch enough videos. I must seek counseling. After a few more of course.
I love the Furai but terribly mad seeing they didn't fkn make it into production even though most people test drive it said it was a beautiful and incredible concept car. The struggle is real when it comes to that gentalman agreement crap in the automotive industry. Both toyota and Honda already had the formula and technology to manufacture the future hyper cars 20 years ago. Yet, we all had to watch Ferrari, lambo, Bugatti, porsche, Astin and so on with their posh name and pretend that they were ahead in super cars.
There's a lot of machine there, capable of some ridiculous track times i reckon, I love the insanity, what a build what a weapon, but I just don't dig drifting anywhere near as much as ridiculously dialled hyper road cars. Amazing machine, massive respect on the level and detail of build, kudos 👊
This is the best video on the internet of the MAd MAc hands down!👍👏👏 Shout out to your team! My favorite is the steam pouring through the nostrils. We might need some prints😁🙏
Pretty sure they have similar if not identical chassis and most anyone can identify the P1 by that distinct rear end so I don’t know how you’d be able to call it 650s GT3
So, it makes a lot of noise, but it doesn't seem to go anywhere 🤔 you can have all the power in the world, but unless you can transfer it all to the tarmac, it's pointless
Bruh do you understand what a drift build is? The whole point is to make a ton of noise and burn rubber on the tarmac. There’s plenty of McLarens that can go round a track quick and with little drama. Building one to go sideways through corners and destroy tires is something truly unique.
@onkarlally so they've taken a car that's perfectly capable of doing that, made it look worse, louder, and eventually, pointless. The original P1 is a great looking car. too bad they messed up this 1 , in my opinion
@@dandangsxr I would rather have something unique to myself and my style of build, different strokes for different folks ya feel. I have much more fun in a car that’s on the edge than a car that’s all business and no nonsense.
@onkarlally for the price of that car, I'd build a sleeper that did both. As an engineer, I much prefer a wolf in sheep's clothing, not much to look at, until it matters. I'm sure the owner of that car loves it, and has the financial means not to care about the cost, clearly, but to me, it's just overdone, which to me isn't attractive or something I'm interested in. It's just like the Kawasaki H2, awesome piece of engineering genius, but whomever did the styling of it wasn't, in my opinion, thinking straight, awful looking bike. But once again, aimed at people with more money than sense or taste ( in my opinion)
@@alim7502 Still feels disingenuous to call it a P1, they are 10 times as much, it's much more shocking to suggest they ripped apart one of the 'holy trinity hypercars'
Terrible drift chassis. That chassis is made to make traction, drift cars are made to slip. You can litterally see MIke trying to slide it but it is fighting him to gain traction.
Full build series over on my channel🤘🏽 Thanks for your support 👌🏽
That car is insane. You’re a badass for building and driving it
One of NZs best exports, true blue kiwi, mad respect mate.
Tip of the hat for this beauty. This car might just be the new King of Sound. FXX K Evo dethroned (?)
Amazing sound. Turbo exhaust usually doesn't sound great, how did you achieve such great sound with turbo?
crazier than a coconut water drinker fkn love it
Madmac sound's like a pissed off F1 car its absolutely menacing and insane. Just can't get enough of the sound
F1 is dead...now it's a vacuum cleaner!
@@TheGkalwomp womp. I still like the sound of the f1 v6 tho.
@@scotcheeP same, they scream in torque is actually impressive as
Check out the footage of the Gordon Murray T.50 that was at this show....different beast again 12.000 rpm . sounds like old school erly 90's f1 and it's a streetcar. mikes car is special.....but it has nothing on the sound of theT.50.
@@cliftongriggs1732 if you are referring to Mazda, this engine design is actually German that the Japanese copied. You have to thank the Germans for the zoom zoom
The shot of the steam coming out of the radiators being carried over the car in perfect streamlines was the most epic depiction of the power and precision of this project. Epic work!!
That coupled with the sound of that engine made it so menacing.
6:55 WAAP WAAP WAAPP *official says calm down* .... wap wap wap 😝
This is the best coverage of the Madmac ive seen so far!
That was hilarious 🤣🤣🤣
Haha😂
They not like us! They not like us!
Well he said calm down, not stop hehe
@@jimerick1 down he did calm, not he did stop. eheh
This is the most bad ass car Ive seen in a long time. Well done MM.
That first 180 was pretty brave right in front of priceless ferrari F1 classics!! 💯🙌🥵🏁🇮🇹🏎
😂👌🏽
That could have been a “hold my beer” moment.
That was a stupid move for sure.
that has to be ridiculously loud in person LOL
One of the loudest cars at fos this year
on friday it was without a doubt the loudest car at FOS, including F1 cars, but it had a few issues, not sure if he made some changes but on saturday and sunday it seemed a bit quieter, probably just me though
cant be rediculous, its a rotary. that shit standard
@@kaijuryuk rotaries are notoriously louder than a majority of piston engines btw... Having 3 cycles going through the same small port that opens up to 4-5" is essentially a massive megaphone that amplifies it even more lol.
In 2017 I was at a Cars and Coffee where the Gia Lai Team showed up. They are notorious for being very loud when they leave. I shot a video sitting on the curb about 10 feet behind one of their Aventadors as it bounced off the limiter for a solid 20 seconds. Every back fire felt like getting punched in the chest, and I felt the heat of every flame that spat out the back of it. My ears rang for the next few minutes after.
A 3 rotor I saw at a drag strip was significantly louder from the stands than that Aventador from 10 feet. Calling it a monster does it absolutely no justice.
Love how he chose a 20b. Gives me good memories of madbull rx8! Loved that 3 rotor sound
Badbul actually, but yeah hopefully he brings the rx8 soon, and hopefully humbul as well
It's what he knows best, that and trying to work with the GT3 race engine was apparently hell since it wouldn't even work without the FIA electronics.
@@shreeshvijayakumar5887 Thanks for Correction The Build Names. Had totally forgotten them.
3 rotor renisis. underrated considering a ton of shit talk from people who never even drove a rotary
Pretty fitting. They replaced that nissan v8 that McLaren called their own with Mazda. excellent choice for the drift and for audience ears
Woke me up more than any morning coffee could
3:25 Donuts with the gull-wings up is something I didn't know i needed in life 😂
These are not Gull-wings. Gull-wings go directly up like the DeLorean DMC 12, but yes, that was a cool donut session 👍🏽
@@vicdiaz5180🤫
RAD!!
you forgot throwing the devils horns!!😂🎉🎉😂
Technically they’re butterfly doors but it doesn’t really matter, looks sick either way
Rotary engines have ALWAYS been reserved for those who WANT TO UNDERSTAND them! Excellent source of power. I had a rx3 back in the day. 13b Weber carbureted….miss that beast!
I have to say that’s probably the best implementation of exotic motor in an exotic car I’ve seen! Awesome!
Live feed didn't do it justice, this sound is absolute magic.
Is it me or does it actually seem like the motor fits the look and the car a little too well
It sorta reminds me of the Mazda Furai
@@Shepard_AU your right man it does feel like the Furai, my all time favorite Mazda.
Yeahh its almost its meant to be!!
It looks and sounds insane
That's because the engine is spectacular and looks good in practically any car.
What a machine and made it 10x better with that 20B swap. It looks like it's having clutch/trans issues and I remember Madmike running into them from his YT build videos. I'm sure he and the team will take their time sorting the car out after rushing to complete it in under the 100day build time. This is the most insane build in the world at the moment IMO.
they talked about it on the build series on mad mike ytb channel, they said it would probably not last the full FOS but then they would use it as much as possible
@@xViRUz7624 yup I remember that. pretty sure it's part 3 or 4 where it's mentioned. Plus they had to redo, from scratch a whole new turbo kit/manifold/shifter. Most customs builds need minimum of a year of shop time to build and in normal conditions, 2yrs total to be 100% dialed in. the fact they managed to finish a hybrid build where every single part is custom in 100days is absolutely mad!! just shows how dedicated MadMike and his team are on such a unique car build. Mind you, only rotary swapped 650s in the world..lol
There is also a guy building a mk5 with an f1 like engine (Judd). pretty insane as well.
@@patrickkdev oh you mean Ryan turek the drifter. Yeah I watched that entire build. I'd say that car is a level under this one. But absolutely epic build too.
I'm glad they did it and the noise was amazing but another rush job that just didn't seem to be set up properly like the madbul Compare these runs to Deane, Baggsy, etc. or his own in the MX5.
There's a reason you don't see MR cars in FD
That noise is so much more fitting than the original motor
If you are a ricer boy and like obnoxious noise yes. If you like the music of a fine tuned engine exhaust and engine, the original P1 engine is just that.
@@segredosdotiosam9989the original car is a hybrid, stop the bs 😂
@@vitalpandya7908 So what ? F1 cars are hybrid since 2014. The Lambo Revuelto is a Hybrid. The Ferrari SF90 is a hybrid. the Porsche 918 is a hybrid. Now go goggle them and learn cause you probably don't know anything about cars.
@@segredosdotiosam9989 exactly F1 is now the most boring motorsport there is lol
@@segredosdotiosam9989 everyone knows that what’s your point? Batteries are boring can’t change my mind go drive a Tesla
The sweet sounding symphony of a rotary engine is music to my ears. Beautiful!
Doing that 180 so close to all those priceless, classic race cars 😅
Cant fix stupid. A guy like that doesnt get invited back
Mad Mike just made my day. WOW, that car is so insanely AWESOME!!!!!! LOVE IT.
Best video I've seen of the MadMac .. awesome job
100% agree 👍
💯 mate…awesome coverage!
New favorite sounding car.
By far THE most impressive car to be controlled by the master Mike ! What noise what a car ! 🙏🏻👍🏻😉👏👏👏👏👏
Best sounding McLaren P1 ever, Rotary really did the job.
This man made my dream build come true. I always want to build a mid engine rotary. I wish Rob Dahm would have done it, but his AWD 4 rotor is badass too.
Hell Yeah🤘🏽
Bloody hell 😳 every time you hear and see this car just blows your mind with the workmanship gone into this bugga mate
2:20 Cameraman needs a raise
the coolest car ive ever seen, since it was first shown ive been obsessed. absolute beast, and extremely unique
6:33 has to be one of the most coolest things to have happened there, madmac looked like it came alive and started breathing🔥
That's so sick. The sounds makes the car looks more of track race car than super car. Match perfectly
One of the most beautiful cars ever made with one of the most beautiful engines.
Is that for sale !?!? Need this fast
Perfect swap! A 20b with big turbo can produce 1000-1300hp and it lightens the car as a whole. It sounds amazing!
Wow. A McLaren I actually like.
The McLaren F1 with the BMW 1V2 was a pretty bad A$$ car as well. For me this one and the F1 are the only good looking McLarens that perform well.
And one gets the common statement ' why customise your classic car'. This is why! Brilliant.
this beast just makes every other supercar look like childsplay
Except McLaren F1 LM
I will always love the rotary
I had a rx7 (12a standard)
Then another rx7 (12a heavily street ported)
Then same rx7 with a 13B turbo, with add ons
Then a rx 8(with decat exhaust and better intake)
And they were all equal in own way
My rx 8 I had the longest, nearly 6 years.
And the best car I ever had
The sound after the exhaust change on the RX 8 was just amazing
You lost me at RX8 is the best car. RX8 had a ton of issues from day one to the last day. The way they did the porting from factory was garbage. Very well known across the board the RX8 will always go down as the worst Mazda ever. I've owned the 1st and 3rd Gen. Both peripheral ported. Rx8 is pure garbage!!!
When you can smoke the tires in any gear with those massive rear tires, you've got some serious horsepower!
They took a Widow Maker - Gutted IT. Threw rotaries with turbos on! Only Mad Mike! Think Ken Block is watching and smiling! For the love of Petrol!!!
Technically, only the rear 3/4 is from a P1. Most of the car, especially the main crash structure, is a 650S GT3 race car.
Insane piece of Kiwi Engineering just awesome and raw
When he did that flick to make a U-turn really gives off that "Really? Right in front of my vehicle" Vibe from those rich guys parked up by the side lol
That thing is insanity on wheels!
This is what "more money than you know what to do with" looks like... I LOVE IT
This thing just sounds perfect 🥹
At some point in my life i'm gonna have to own a 3-rotary engine car. The sound of these things is just mental.
I’d like to thank Mike for building this car. I’m totally in love with it and completely obsessed with it. I can’t watch enough videos. I must seek counseling. After a few more of course.
Thanks!!🙏🏽
That sounds made me goosebumps 🥶
Yea tire companies love this guy
This is quite possibly the sickest build of all-time…
This is the closest to a Furai right now
Lol Absolutely , waiting for Furai's return
@@sharms888 the Furai Never came. It was never a production car only a prototype, but hopefully one day it will become a production car.
I love the Furai but terribly mad seeing they didn't fkn make it into production even though most people test drive it said it was a beautiful and incredible concept car.
The struggle is real when it comes to that gentalman agreement crap in the automotive industry.
Both toyota and Honda already had the formula and technology to manufacture the future hyper cars 20 years ago. Yet, we all had to watch Ferrari, lambo, Bugatti, porsche, Astin and so on with their posh name and pretend that they were ahead in super cars.
787B still sounded better
@@JointFive It's a completely different engine. Nice comparison.
Best sound for this model of McLaren vicious at take-offs 🔥🔥🔥🤯👀👀🌪️🌪️🌪️🌩️⛈️
Smoke coming over the car in 5e wet at 6:50 is wild
Edit 6:37
That is unreal. I can't believe how good this thing sounds.
The P1 is one of my favourite cars, finally 1 that has the sound to match the looks
It's not a P1. It's a 650 GT3. He just put the P1 back shell on it.
@@skinnybuddhaboy 🤓👆
650s gt3 is wif p1 gtr bodykey is NOT P1
Lmao the sound fit the car so well
What a good lookin, n Great sounding Ride !! 👍🏻😎👍🏻💙
Excellent build these guy's did.
That's one angry beast! I love it!
@3:20 doing donuts with the doors open 🔥🔥🔥 this car is baddass!!
That car is mental
*1st the drift lambo, now a drift McLaren… **_HES INSANE 🤯_*
Spettacolo!!! Non so quanto pagherei per poterla guidare!!!❤❤
That sounds so tough!
Just love the sound of a rotary engine, how it just loves to rev!
3.20 doing donates with the gull wings .
Redbull does give you wings.😂😂😂
There's a lot of machine there, capable of some ridiculous track times i reckon, I love the insanity, what a build what a weapon, but I just don't dig drifting anywhere near as much as ridiculously dialled hyper road cars. Amazing machine, massive respect on the level and detail of build, kudos 👊
Mad MIKE what a LEGEND 🔥🔥🔥🔥
Rotary power yeah baby 😂 I can smell the fumes through my table.
Not just an insane car but an insanely skilled driver!
This man is living what I daydream
pls upload more videos, so much better than the goodwood channel
Наслаждение для ушей 😊
Vi el vídeo y pensé.. Pensé suena como un rotativo 😅 justo es increíble cómo suenan
best engine swap in history they should come as standard with this!
I think he pulled it off. RUN 20B
This is coolest car ever built
Simplemente MAGNIFICO
This is the best video on the internet of the MAd MAc hands down!👍👏👏 Shout out to your team! My favorite is the steam pouring through the nostrils. We might need some prints😁🙏
Sounds like a AZTEC DEATH WHISTLE 😮😮🤘🏼
Definitely earned his name lol
This is the most INSANE build I’ve ever seen. 😩😩😩
It's really sick, but im almost 100% sure it did not start its life as a P1
It did not, it was 650 GT3, just put the P1 back shell on it.
The builds on his channel
cos 650s + p1gtr bodikey is NOT P1
Ruined it for me 😆😩
Sounds amazing! 👊😎🫡
That is the way they should come now. 20B with turbos.
6:32 the steam coming out of the bonnet looks like a dragon having smoke come out of its nose
Obnoxious chainsaw
This car is so freaking sick!!!!!
It is not a P1. It is the Chassis from a 650S GT3 with custom body panels.
Pretty sure they have similar if not identical chassis and most anyone can identify the P1 by that distinct rear end so I don’t know how you’d be able to call it 650s GT3
That makes since. It would cost too much with a real p1. And it would be a shame losing one of the originals
it’s supposedly a p1 gtr, which is even more insane, as it’s a 3.1million dollar car
@@dream8870 It's not though, it's a 650S GT3, there is another video showing you the original car, costs like £100k
Is a P1, the rear of a 650 GT3 looks different.
Old Florida T-man needs to pack it up after this build has been unleashed in such a timely manner.
That's not a Mclaren P1 - it's a widebody 650s - got his autograph and saw the car on Sunday so I know ;)
Yep, 650S GT3, I've seen a video of the original car before it was made into a 'P1'
@@The24GamerWell now that makes more sense. I had a hard time reconciling the fact that someone would cut up such a rare and extremely expensive car.
So, it makes a lot of noise, but it doesn't seem to go anywhere 🤔 you can have all the power in the world, but unless you can transfer it all to the tarmac, it's pointless
Bruh do you understand what a drift build is? The whole point is to make a ton of noise and burn rubber on the tarmac. There’s plenty of McLarens that can go round a track quick and with little drama. Building one to go sideways through corners and destroy tires is something truly unique.
@onkarlally so they've taken a car that's perfectly capable of doing that, made it look worse, louder, and eventually, pointless. The original P1 is a great looking car. too bad they messed up this 1 , in my opinion
@@dandangsxr I would rather have something unique to myself and my style of build, different strokes for different folks ya feel. I have much more fun in a car that’s on the edge than a car that’s all business and no nonsense.
@onkarlally for the price of that car, I'd build a sleeper that did both. As an engineer, I much prefer a wolf in sheep's clothing, not much to look at, until it matters. I'm sure the owner of that car loves it, and has the financial means not to care about the cost, clearly, but to me, it's just overdone, which to me isn't attractive or something I'm interested in. It's just like the Kawasaki H2, awesome piece of engineering genius, but whomever did the styling of it wasn't, in my opinion, thinking straight, awful looking bike. But once again, aimed at people with more money than sense or taste ( in my opinion)
It's a drift car bro calm down
Holy shit that is just one hell of a dream come true right there. Not just because of the p1 but a damn engine swap to make it sound mean as hell!
650 GT3, P1 rear shell
It’s a 650S GT3 not a P1 ahahahha
I know it is (read the description), but they modified it to look like a P1, so I'm going to call it like that.
Their Chassis is the same so it doesn't matter
@@alim7502 Still feels disingenuous to call it a P1, they are 10 times as much, it's much more shocking to suggest they ripped apart one of the 'holy trinity hypercars'
@@NM2255 Correct, it has a Rocket Bunny kit aswell. My bad, didnt read the description
🏎 *That turn was so sick.* Best execution and way to go. Creep in, 🔃, creep out. _Well done!_ 👏
Terrible drift chassis. That chassis is made to make traction, drift cars are made to slip. You can litterally see MIke trying to slide it but it is fighting him to gain traction.
Ammaanaaaa ZikkZakkk
Was ist das krankes 😮
This is what I love about Custom Car Building and having NO Rules ‼️‼️ Just Plane BADD Ass
Nothing beats the sound of good ole rotory motor.
P1 design fits rotary engine perfectly
Beautiful car.
Wwwowww mike just on another level man ,Geezs the man
never in my life thought i would mistake a Mclaren for a Mazda, but it's like a match made in heaven
Peak engineering