DIY 16000mAh Power Bank using old flat Laptop Battery Cells
HTML-код
- Опубликовано: 30 сен 2024
- #ErCanEverything #DIY #PowerBank
🔋In this video I will make a 16000mAh Power Bank using 22.5W Bi-directional Charging module and Used flat Li-Ion cells from Dell Laptop Battery
• FNIRSI FNB58 196W Prof...
• ZOYI ZT-702S Rechargea...
• How to make a 40 000 m...
🔥You can find featured products here👇
📌22.5W Type-C Charging Module: s.click.aliexp...
📌20AWG Soft Silicone Wire: s.click.aliexp...
📌GD900 Thermal Paste: s.click.aliexp...
📌20mm Fiber Glass Lithium Battery Insulation Tape: s.click.aliexp...
📌18650 Battery Insulation Gasket Barley Paper: s.click.aliexp...
📌High Temperature Anti-Static Insulation Tape: s.click.aliexp...
📌Zoyi ZT-702S Multimeter Oscilloscope: s.click.aliexp...
📌AMTECH Lead-Free Solder Flux: s.click.aliexp...
📌Antistatic Solder Paste Brush: s.click.aliexp...
📌Fnirsi FNB58 USB Tester: s.click.aliexp...
Plastic Bottle + Hot Air Gun : Brilliant Idea👍
Thank you my Friend😊
yeah, I really liked it
Question: What was the first type of tape used to bind the batteries?
IC name: IP5358 (I am making a custom PCB with it and it looks like all sellers of this PCB gatekeep the IC name).
Second life for batteries!
Very professional assembly, 3 types of tape, also module with temperature sensor!
Great work as always Brother!
Thank you Brother😊🤝
Donde compraste el módulo LX-PB225M. Por favor responde
Porque no me dices donde lo compraste
You really are a genius
And I love that you are such a PARKSIDE fan just like me
Thank you my Friend😊🤝
Awesome but how are you balancing the cells? Having that many cells in parrallel without a way to balance individual cell voltages is unsafe over long periods of time the voltages will become out of sync due to changing resistances of each cell being different to each other. Then eventually they will puff or catch fire on the charger. Please be carefull
Согласен. В лучшем случае некоторые ячейки умрут, в худшем будет пожар.
That would only happen if many cells were connected in series without balancing. If they are in parallel the voltage on every cell is always the same. Almost all commercial power banks are built like this
pet bottle great trick!
nice work man, I really like your product
Thank you my Friend😊🤝
CRACK 🤯
Parkside + Battery = 💙💛💙💛💙. Idemo Brate pozdrav Svedske
16.500 mah in that form and size factor is amazing :)
Can I connect 5 10000mah ie50k mah lipo battery in parallel with 22.5w power bank module is it safe?
look up the data sheet of your 22.5w module, if it's the sw6206 you need to change the R8 resistor to your 50k mah battery, the resistor there I think should be 55C which can only accomodate 20k mah batteries so you should change the value of that resistor, the formula to that is
resistance value = (total mah battery + 2000) * 5/3
How do you charge it
From the same port
how do you recharge?
The same port is input and output
Using same port.
Cual es el módulo que usa por favor
How does fast charging work, without damaging battery?
👉👉👉ruclips.net/video/E7Q1ofJ4jEw/видео.html
Mind sharing, how much Watts the charging is? Also, do you think the port on the downside (for the other version with second usb-a) could be used for a 5V load like a raspberry pi?
Looks fun
Harika bir video emegine saglik
💪👍
Teşekkür ederim Dostum😊🤝
Everything higher than 10watt heats up the board very well. So be careful.
Which power bank circuit you used in this project? Model name please...
pls use a decent case sheesh
Not balanced.
This configuration is 1S 6P which is 3.7V and there is no way or anything to balance🤷
ruclips.net/video/y_3yFDpwFBk/видео.html
This one is 5S 2P 18V with balance.
should have used a spot welder, and dont use hot snot glue, and for fuck sakes, dont heat shrink a bottle to it
For more usb ports can I add another usb module? And the other usb module must be connected only to the batteries or also to the other usb module?
type modul?
👍👋👋👋
👋👋👋😊🤝
Bruh what's the type of module you use? I want to build like your's❤
module name plz?
This board is great! It has a smaller one with the same function, but without the display.
AWG unity ? 😅
Built in BMS?
That's some professional level build clean and proper also loved the plastic bottle use here
Love the plastic bottle heat shrink idea. 👍
Well, it if shrinks when it is heated, than it is a shrink wrap :D
@@RelakS__ Exactly. Such small tricks & ingenuity in general excite me! 💪😁
Plss as next video the parkside psbsap b3 open
how i find the cells on ali express?
How to know which side is +ve and -ve
How to recharge the battery?
süper
Идея хорошая ,но нужно балансировать аккумуляторы или ставить плату с балансировкой .Иначе часть аккумуляторов из строя выйдет очень быстро.
Hang on there 4000mah each ime 100% theres more than 5
So your tellling me there 2666mah sorry thats a weird number..it looks like a 24.000mah p bank its a nice 1 i like these batryz but thr top snapps off thrm there a chew on 2 dismantal can i ask u somet plz somet i need 2 ask sum1 who knowes about leky ime new 2 the game well kindov i make allsorts out of old batz power banks solor wind up i collect them used vapes om the floor and i also go in the battry bins i get loads of weird good batz all 4 free every shop lwts me take them i have prb nsarly 2000 bat from 40mah upto 20.000mah batz
حسنت
👍👍👍👍
Teşekkür ederim😊🤝