Build a 360.000mAh Laptop Power Bank from 180cell Old 18650 Battery
HTML-код
- Опубликовано: 5 фев 2023
- In this video, i will Build a 360.000mAh Laptop Power Bank from 180cell Old 18650 Battery
- Video How to Build A Tool Spot Weld Removal For All Old Cells Battery 18650
• Build A Tool Spot Weld...
- Video how to Build A v3 Spot Welder For Batteries
• Build A v3 Spot Welder...
Thanks You for watching, Have a great day ! Хобби
💕 love from India 🇮🇳🇮🇳🇮🇳
Creative channel follow me I love you china
❤️Love from Algérie ❤️
A Índia é incrível, apaixonada pela sua gastronomia 🥰
lol
Iove from iran
One of the BEST stations setup for this type of work!!!!
no it’s not best not even looking good
TECHNICAL DETAILS:
Each pack configuration =
60 x 18650 batteries. 60 cells are connected in parallel.
ESTIMATE capacity = 120,000 mah capacity or 120Ah.
(considering each cell is 2000mah X 60 cells)
Voltage = 3.7v (nominal voltage) or 4.2v (max charged voltage).
Each 18650 cell (estimate guess) rated between 2000mah - 3000mah.
3 packs configuration =
3packs have 180 cells in total.
3 packs connected in series. (4.2v max each pack)
Output will be 12.6v at 120,000 mah / 100,000 mah, which is an insane capacity!
--------------------------------
ITEMS USED =
Laptop charging module / charging bank module. (Supports laptop and various devices that take output 16v - 20v. And standard 5V 2A for 5v device charging. This module also acts as a voltage balancer between the 3 packs)
180 x 18650 batteries (salvaged from drill batteries. Then each cell is tested for voltage and mah capacity using a smart 18650 tester such as OPUS BT-C3100 charger or similar)
Nickel Strip / Nickel Belt strip (for high amp transfer between cells. Acts as a high gauge connection)
18650 insulator ring (to prevent positive terminal shorting with neighbour cells negative/ground side)
Shrink tube (large mm width. Its waterproof. It's used to protect electronics and cells from environment hazard, any outside hazards etc. Provides cover/external protection. It shrinks using heat)
And finally...
1 Litre of Common sense.
5 litres of knowledge.
10 litres of testing.
10 litres of safety.
Hope that helps. (I built battery packs and have basic electronics and electrical knowledge. +more. See my channel for more)
NOTE = THIS BATTERY PACK WILL CHARGE VERY SLOWLY since its a high capacity built battery pack. Using a 12V 2A charger at full 2A. That would take him almost 60 hours of charging (2.5 days)!! ..... LOL!!
RIP Time.
RIP wall charger.
Hallo Pro ,
i cannot find it ?
from where did u bought it pls ?
Laptop charging module / charging bank module. (Supports laptop and various devices that take output 16v - 20v. And standard 5V 2A for 5v device charging. This module also acts as a voltage balancer between the 3 packs)
120 Ah means this pack could power an inverter provide electricity for household equipments and store solar power as well.
1.4 kilowatts 😮
@@MINOOOO922 same question
I've tried looking for it on the marketplace but still can't find it
2.5days charging I think it's really fast for 120Ah
Beautiful,,, Love from Bangladesh 🇧🇩🇧🇩
Beautiful. How i wish i have that kind of equipment and 18650's
Love from Bangladesh 🇧🇩🇧🇩🇧🇩
I am impressed.
Thank you for your efforts.
I watch it often.
I hope you make good content next time, too.
I rating This Channel 10 on 10 because this channel is no. 1 in ranking
I think 🤔 this power bank need a perfect 3D printed body Cover to protect it from being damage . but amazing ❤😊
WOW,, that's awesome,, Well-done
This plus ur water generator = infinite electricity for off grid living 🤩🤩
Машинка для очистки контактов понравилась ,отличная штука . Можно сделать и попроще с ручным рычагом .
Does anyone have the Aliexpress link for the module I used to buy it?
I love to watching your amazing video. Thanks for sharing with us my friend. have a nice day and more success. Greetings from Italy 🇮🇹
God reveals each of the participants in my channel
ruclips.net/video/r1N4xSAr718/видео.html
PLEASH BHAILOG SUPPORT KARDO PLEASH.
Love💖 your videos from Philippines🇵🇭
Love from Russia 🇷🇺❤
Your creation is awesome💖💖😍👍🇧🇩🇧🇩
Love from Bangladesh
you are a genius💪
Love from Brasil 🇧🇷
Amazing channel!
I love the idea, but think i would have opted for a more robust out casing to be honest,
Wow, a powerful powerbank with tiny output current :-D
BEFORE YOU MAKE THE POWER BANK YOU NEED TO MAKE THE TOOLS FIRST TO MAKE IT EASIER.
THIS MAN IS AWESOME.
❤ Love from Bangladesh 🇧🇩🇧🇩
Tks from karnataka
Nice video!
Love from Bangladesh ❤️🔥❤️🔥
must add extra bms so you can charge fast and use 12v for whatever you like
Keep up the good work
Mantap mas brooo....
Thanks for the video
Love from Ukraine
Love from India 🇮🇳
Wow I will love to learn this from you
Love from Bangladesh ❤️🇧🇩
Mexcellent job bhai
love this
thanks
can you link the module for us from aliexpress
I am like your hairstyle bro
love you from Bangladesh 🇧🇩🇧🇩🇧🇩
You are great love for india 🇮🇳
❤️❤️❤️
Nice content bro!
Where we can find the module you used in this video????
Love from srilanka😘
I love your videos
Buena buena!
This would be better off used as a small power wall (or similar) for semi-permanent electronic appliances, since trying to charge up 180 cells will take a very long time.
In fact, I'd say that, unless you used a really fast charger, the self-discharge of the cells will play more of an impact than the charging current!
My life and the lives of others are worth more than one of these experiments, and if it explodes for a short time, not even its protection circuit will save you
Does anyone have the Aliexpress link for the module I used to buy it?
Love from Pakistan i wish to work with your company
awesome... 👍🏽👍🏽
This powerbank is very important to avoid interruption from the BIOS update...
love from India🇮🇳🇮🇳🇮🇳🇮🇳
C’est très bien pour avoir recharger la batterie de l’ordinateur portable
love form
Bangladesh🇧🇩🇧🇩🇧🇩
Mantap sekali 🇮🇩
This is actually crazy wowowowiw
Love from Bangladesh 🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩
Long live a hero
Super 👍
with that much power, I feel you could have added a few more jacks to it.
Can you make a 1.000.000 mAh next?
Nossa incrível bom
This is a 120Ah battery pack, not a 360Ah. If the pack were 180 cells in parallel then it would be 360Ah 3.6V, but now it's 2Ah per cell x 60 cells in parallel = 120Ah 12V.
Ya but if you compare this as 3.7 v it's 360 ah here 3s series so voltage is more ,120 ah.
TECHNICAL DETAILS:
Each pack configuration =
60 x 18650 batteries. 60 cells are connected in parallel.
ESTIMATE capacity = 120,000 mah capacity or 120Ah.
(considering each cell is 2000mah X 60 cells)
Voltage = 3.7v (nominal voltage) or 4.2v (max charged voltage).
Each 18650 cell (estimate guess) rated between 2000mah - 3000mah.
3 packs configuration =
3packs have 180 cells in total.
3 packs connected in series. (4.2v max each pack)
Output will be 12.6v at 120,000 mah / 100,000 mah, which is an insane capacity!
--------------------------------
ITEMS USED =
Laptop charging module / charging bank module. (Supports laptop and various devices that take output 16v - 20v. And standard 5V 2A for 5v device charging. This module also acts as a voltage balancer between the 3 packs)
180 x 18650 batteries (salvaged from drill batteries. Then each cell is tested for voltage and mah capacity using a smart 18650 tester such as OPUS BT-C3100 charger or similar)
Nickel Strip / Nickel Belt strip (for high amp transfer between cells. Acts as a high gauge connection)
18650 insulator ring (to prevent positive terminal shorting with neighbour cells negative/ground side)
Shrink tube (large mm width. Its waterproof. It's used to protect electronics and cells from environment hazard, any outside hazards etc. Provides cover/external protection. It shrinks using heat)
And finally...
1 Litre of Common sense.
5 litres of knowledge.
10 litres of testing.
10 litres of safety.
Hope that helps. (I built battery packs and have basic electronics and electrical knowledge. +more. See my channel for more)
Does anyone have the Aliexpress link for the module I used to buy it?
Good technology
Please , my friend, please active the subtitles
Soon I can make like this
Very creative and useful product. But I will support a ups instead.
Nice 👍🔥🔥🔥🔥
ruclips.net/video/r1N4xSAr718/видео.html
PLEASH BHAILOG SUPPORT KARDO PLEASH.
WATCHING YOU MORE THAN 6 TO 7 YEARS🔥🔥💓LOVE FROM PAKISTAN 🇵🇰 🔥🇵🇰
Respect bro
And I am like for your vidio every day
Super bro
Bro v good video
World big power Bank 😮
Good one... Please can you place a link to buy materials used
Does anyone have the Aliexpress link for the module I used to buy it?
That is one monumental power bank - though the term "power bank" would have to be loosely used, since this isn't very portable at all.
I'm pretty sure that all of my low voltage electronics could be taken care of using this "power bank".
I'd classify this as either a large 12V battery, or a 12V power wall, due to the sheer energy density of that battery pack.
Still, I know of a few uses that I would have for such a battery bank, though I'd have no idea where to get all of those cells from, or where I'd get a spot welder from.
Also, no this isn't 360,000mAh. Each cell is 2,000mAh which, for 60 cells, is 120,000mAh or 120Ah. By creating a 3S pack, you increase the voltage, not the capacity, so the total is 120,000mAh/120Ah at 11.1V nominal (12.6V maximum), giving a total energy of 1,332Wh or 1.332kWh.
Does anyone have the Aliexpress link for the module I used to buy it?
Hello master 👍🙏
Saludos 🇩🇴✌️
ah. The iconic Intro from 2019's
Bonjour! J'aime beaucoup vos créations mais pourriez-vous s'il vous plait mettre en description les liens où vous achetez les composants? MERCI ^^
Open my page on the call and you leave God that keeps you and keeping your values and my brother is galvale🌺🤲
TECHNICAL DETAILS:
Each pack configuration =
60 x 18650 batteries. 60 cells are connected in parallel.
ESTIMATE capacity = 120,000 mah capacity or 120Ah.
(considering each cell is 2000mah X 60 cells)
Voltage = 3.7v (nominal voltage) or 4.2v (max charged voltage).
Each 18650 cell (estimate guess) rated between 2000mah - 3000mah.
3 packs configuration =
3packs have 180 cells in total.
3 packs connected in series. (4.2v max each pack)
Output will be 12.6v at 120,000 mah / 100,000 mah, which is an insane capacity!
--------------------------------
ITEMS USED =
Laptop charging module / charging bank module. (Supports laptop and various devices that take output 16v - 20v. And standard 5V 2A for 5v device charging. This module also acts as a voltage balancer between the 3 packs)
180 x 18650 batteries (salvaged from drill batteries. Then each cell is tested for voltage and mah capacity using a smart 18650 tester such as OPUS BT-C3100 charger or similar)
Nickel Strip / Nickel Belt strip (for high amp transfer between cells. Acts as a high gauge connection)
18650 insulator ring (to prevent positive terminal shorting with neighbour cells negative/ground side)
Shrink tube (large mm width. Its waterproof. It's used to protect electronics and cells from environment hazard, any outside hazards etc. Provides cover/external protection. It shrinks using heat)
And finally...
1 Litre of Common sense.
5 litres of knowledge.
10 litres of testing.
10 litres of safety.
Hope that helps. (I built battery packs and have basic electronics and electrical knowledge. +more. See my channel for more)
Did you test the internal resistance( Age) of each cell?
Qual o modelo do módulo? e onde comprar!
Expensive for 18650 cells, not everyone has around 180 of them lying around at home. It charges with 2A for about a long time. In this case, lead still plays its part. A car battery and charger plus some kind of inverter will be cheaper.
Super
everyone Where can I buy the electronic board?
Please tell us the model name.
.?
Does anyone have the Aliexpress link for the module I used to buy it?
Si fueses tan amable cual modulo es el que usas o en que pagina lo conseguiste gracias y saludos
Tambien lo ando buscando, si lo encontraste me podrias compartir el link por favor
Essa ficou top demais 🎊. Parabéns
Brasileiro
Slc quero faze uma pra usa quando tive acampando foda vai se o peso na bike kkkkkk mas peso e relativo ne
@@pablozombiegames 3 :)
@@matheusnasc97nascimento88 verdade
@@matheusnasc97nascimento88 isso aí
Nice
From where you buy this powerbank bank module,,i need it
his machine for removing the spot welds is awesome
Yeahhhhh
Does anyone have the Aliexpress link for the module I used to buy it?
Bro just made a power house at home😮
You could have used 21700 cells and gotten more mAh, therefore a longer lasting battery
The point is that these were used cells from something. Used cells is what he had and that is what he used.
Dónde consigues tantas celdas ? O donde lo puedo comprar??
Hello brother and hou are you I am form varanasi India
crafty - wanna know how much this thing weighs!
Please provide name or part number of that charging module.
amazing video brother i am from pakistan please let me know from where i get these battries
Hi, what is the model of the charging board? Or where did you get it from? Please tell this information in further videos with your community, bc I alwas have these problems to find out, what boards you use. Thanks a lot.
Does anyone have the Aliexpress link for the module I used to buy it?
@@ioriarpegi1 nope
Please make a 775 dc motor drill machine body use 3d printer
Lovely, where do I get the circuit board used for your project. Input and output.
Does anyone have the Aliexpress link for the module I used to buy it?
👏👏👏👏👏👍👍👍
Cuanto tiempo tomaría cargar esa batería de 360k mAh al 100%? 🤔🤔🤔
2000mAh is about 4 hours. So, 360k mAh is 4 hours x 180 = 720 hours / 30 days