for everyone who falls into dispair trying to connect any led strip or device. keep repeating this method until it works. I spent 1hour with this until it connected. Good luck😌
If you guys had the same problem as i did, listen Careful, you have 3 Buttons on the connected led strip (Connected to power adaptor) if you hold the middle Button for at least 5 secondhand, it Will start blinking, bare in mind, you have to turn off the light before doing it. Try all buttons if middle dont work. Hope this helps!
Please help me i dont have three buttons and i have lost my remote controll and when I turn it on thy dont blink they go blue red green and it doesnt connect. What should i do?
Done everything right and it just does a 2 minute countdown and doesn’t connect But also my app looks diffferent It’s the same app but in lighting it has loads of options not just a few
@@tt_1222 I pretty much just did what the video says. It wasn't working at first until I did the unplugging that he did at 0:16 then I clicked on the remote "strobe" which obviously made it start blinking on and off and it eventually connected. Make sure in the app you're using the correct "light" setting the one I use says "LED strip lights" sorry if that was a bad explanation but you just gotta play around with it eventually it will work
Please help me i have lost my remote controll and when i turn my lights on they go blue red green they dont blink and i cant connect it. What should i do?
mine USED to work. I had them connected to my phone and my alexa. I went to college and came back for break and for the life of me I CANNOT get them to go into pairing mode. :(((
I can't connect them from the get go. I've tried it several times and it's frustrating to no end. When the lamp goes into pairing mode and blinks it suddenly stops blinking. But that's only sometimes the case depending on what connection type I choose or something....
hi, but is your LED control unit from Magic Home? because I have the same control unit as yours but which works with magic home, but the application is very ugly and not very detailed and I would like to use smart Life as an application to connect more devices and not just my LEDs
Alright solution:unplug for 5 mins and then plug in and turn off then Hold power button until they start blinking green fast (this might take a while) then just pair it on the tuya smart app and there you go
Didn’t work for me but I got an IR controller with mine from Amazon I held the power on or maybe off button for a few seconds untill it started flashing (pairing mode)
I have these same lights. The first time I connected the up they worked fine...for 2 days. Now they won't connect to my wifi, saying the signal is weak when I'm standing right next to the wifi antenna. These lights are garbage. Fortunately the seller refunded my money. Can we get back to "made in America"?
mine doesn't blink I have tried to do it but this is just a waste of time to turn it off and on it just won't work do u have any way of helping me?? btw this isn't from amazon, its from Kmart
Alright solution:unplug for 5 mins and then plug in and turn off the. Hold power button until they start blinking green fast (this might take a while) then just pair it on the tuya smart app and there you go
What is the app called ? I bought mine from Ali express and it won’t stop blinking different colours and sadly the remote won’t work. I need to use my phone as the remote till I get batteries!
My led lights can blink slowly and quicky, but when is searching it the app, it takes a tic of time and keep in the first step, and then there’s a message saying “doesn’t coonect “
No matter what I do and which instructions I follow, the Magic Home RGB Wi-Fi controller is not detected by the Smart Life app. On the other hand, the controller is identified in a few seconds by the Magic Home app. :-(
thanks for the video but i couldnt keep up at all.. you were doing the steps way too fast i had to slow the video to half the speed and my lights still dont blink, also it says to turn off and on 3 times but you did it 5 times please help im ready to throw them out
@@pedrosepulvedagaete943 ya it really sucks. Especially since I have 20M of LED strip that doesn't even work😔🤣. I'm about to buy bluetooth remotes since I think the problem is with my WIFI. My wifi is possibly unstable, so I assume it's that(it'll be on a constant 50-70 ping and then it will spike to 600-1000 for a minute or 2). If anybody knows of a fix PLEASE tell me.
Já fiz esse procedimento várias vezes conforme o vídeo e não funciona. A fita led não reinicia e fica o tempo todo piscando vermelho de forma lenta. Saberia dizer como resolver?
У меня диоды мигают медленно, дизайн приложения обновился и там нет, светодиодной ленты, теперь к ней приставки (BLE+WIFI, BLE, WIFI, ZIgbee) и что конкретно нужно выбрать я не знаю, но я пробовал всё. У меня не может найти сеть sl и я не могу подключить ленту
Alright solution:unplug for 5 mins and then plug in and turn off the. Hold power button until they start blinking green fast (this might take a while) then just pair it on the tuya smart app and there you go
Can someone help me pls. I have lost my remote controll and when i turn my led lights on they go blue red green they dont blink and when i try to connect it it doesnt. Can someone tell me what to do?
@@gloryhiggins4758 But mine isn’t even showing up in the app. I don’t have the version with a controller so I have no clue how to enter pairing mode. They doesn’t flash one color. They flash rgb colors when I unplug/plug 5 times
@@vincky7408 this is what I did to get them to flash. I press the power button to turn them off and I waited 10 to 20 seconds and then I went and held down the power button for eight seconds. then they turned on just red and I waited a couple seconds and they started blinking… But then they wouldn’t pair
for everyone who falls into dispair trying to connect any led strip or device. keep repeating this method until it works. I spent 1hour with this until it connected. Good luck😌
it keeps saying connection timed out?
@MadeForArt same did it ever work?
@@ciaraweekes4349 did it ever work because it’s saying the same for me?
You actually saved my life I never comment on RUclips videos but this saved my ass. I couldn’t get these things to work all DAY
If you guys had the same problem as i did, listen Careful, you have 3 Buttons on the connected led strip (Connected to power adaptor) if you hold the middle Button for at least 5 secondhand, it Will start blinking, bare in mind, you have to turn off the light before doing it. Try all buttons if middle dont work. Hope this helps!
Please help me i dont have three buttons and i have lost my remote controll and when I turn it on thy dont blink they go blue red green and it doesnt connect. What should i do?
TyyN
I LOVE YOU! THANK YOU!
Thank you very much for this very helpful video. I've been crazy connecting our smart strip lights since yesterday, you really saved me!
I did everything and it doesn’t work😪
Maybe they aren't compatible with ur leds
Doesnt work
It doesn’t work for me either.
This was super helpful for getting a WB5 connected to the app. Thanks so much for posting it.
What is the name for the app
thank you so much, was struggling so much before watching. Thank you super helpful, God Bless You
Mine doesn't work:(
Me either
Same here
Same? Maybe a scam
hey did you fixed this problem?
@@KroWhite no
YOOO THANK YOU SO MUCH I WAS STARTING TO THINK THAT MY LED STRIP HAD A PROBLEM OR SOMETHING
I can get them to start blinking but it never connects
same and i dont know what to do about it
Same here
Same here
@@-charlesmvp1389 same
same here
Done everything right and it just does a 2 minute countdown and doesn’t connect
But also my app looks diffferent
It’s the same app but in lighting it has loads of options not just a few
Same for me nothing works
I’m having the same issue, it used to work but now it’s not? I think it’s something to do with 5G WiFi connection, maybe look into changing your wifi
@@jkellz6134 mine worked after continuous tries and I just kept trying it
@@kng_will_cm8429 which led option did u chose
Omg thank you so much for this they're working great!
Can you explain your steps on how you got it
@@tt_1222 I pretty much just did what the video says. It wasn't working at first until I did the unplugging that he did at 0:16 then I clicked on the remote "strobe" which obviously made it start blinking on and off and it eventually connected. Make sure in the app you're using the correct "light" setting the one I use says "LED strip lights" sorry if that was a bad explanation but you just gotta play around with it eventually it will work
Wat it call
Please help me i have lost my remote controll and when i turn my lights on they go blue red green they dont blink and i cant connect it. What should i do?
Any way to have music mode on readings throw phone bluetooth instead of real life sound vibrations?
mine USED to work. I had them connected to my phone and my alexa. I went to college and came back for break and for the life of me I CANNOT get them to go into pairing mode. :(((
Where you able to get it to work? I’m about to email these mf
having the same issue, did you ever get it to work?
I can't connect them from the get go. I've tried it several times and it's frustrating to no end. When the lamp goes into pairing mode and blinks it suddenly stops blinking. But that's only sometimes the case depending on what connection type I choose or something....
@@officialnoonon I'm having this problem too, did you ever get it to work?
hi, but is your LED control unit from Magic Home? because I have the same control unit as yours but which works with magic home, but the application is very ugly and not very detailed and I would like to use smart Life as an application to connect more devices and not just my LEDs
bro thank you very much, i was trying to connect this like for 15 mins without any progress hahahahahhaha
Don't worry guys, try switching power off from mains, then turning it on. Repeat until it goes into pairing.
i unplug it 3 times but it doesn’t blink, all it does is change the color, any suggestions how to get it to blink?
Did you figure out
Mine doesnt start blinking
Yeah mine either
Alright solution:unplug for 5 mins and then plug in and turn off then Hold power button until they start blinking green fast (this might take a while) then just pair it on the tuya smart app and there you go
@@l_o_w_e_r_e_d3695 thanks
@@l_o_w_e_r_e_d3695 thanks
@@softluhving9765 does it work
you literally save me thank you
When you connect to AP mode, is it wireless or wired?
Thank you very much
Bro thank you so much
Mine doesn’t blink. I saw one comment explaining how to fix but their typing skills were awful and I could not understand it. Please help.
Try disconnecting and connecting more slow
not too fast
Mine does blink red green blue very fast. Is this pairing mode or not. Because I don’t have the version with an IR remote
idk, mine blinks white
@@vincky7408 same here
writes turn off and on 3 TIMES. But in video, he turns off and on 5 times! Which is correct?
Thank you, you helped me out a lot.♡♡
They won't even turn on
Didn’t work for me but I got an IR controller with mine from Amazon I held the power on or maybe off button for a few seconds untill it started flashing (pairing mode)
Thanks so much!!! I was so lost!
My lights won’t connect it keeps saying failed to connect to router so you have a fix?
cool but can u use remote when u want again?
Yeah you should be able too
Yes
OMG this worked thank you so much now I can sleep😭😭
I do that and when I press a color on the remote it works and shows it on the app but doesn't show the colour on the actual lights
So da pra fazer por um usuário?
Can this sync to the TV screen?
El único video que me sirvió, gracias!!
TYSM THIS HELPED ME
Thank you❤🙏
I have these same lights. The first time I connected the up they worked fine...for 2 days. Now they won't connect to my wifi, saying the signal is weak when I'm standing right next to the wifi antenna. These lights are garbage. Fortunately the seller refunded my money. Can we get back to "made in America"?
Thanks a lot.
Awesome ty
mine doesn't blink I have tried to do it but this is just a waste of time to turn it off and on it just won't work do u have any way of helping me?? btw this isn't from amazon, its from Kmart
Alright solution:unplug for 5 mins and then plug in and turn off the. Hold power button until they start blinking green fast (this might take a while) then just pair it on the tuya smart app and there you go
Thanks Man
شكرا لك جدا لقد اتعبني هذا الشيء واخذ وقتاً كثيرا
How about bluetooth? It's visible on bluetooth search but not on any app
Mine wont blink even though im switching it on and off 3 or 4 times... please help
You literally saved me
Same💀
What does the app called?
I still can’t get mine to connect with the flashing lights it’s green it will not change to red lol
bist der beste mach weiter so lieb dich
Please help me, my lights are already connected but it doesnt matter the color i choose it just stays on purple or white, i dont understand
Thank you soooo luck
I can't reset them. Can i get any help please
me either did you find a way to reset it?
@@jayceruby7347 nope
What is the app called ? I bought mine from Ali express and it won’t stop blinking different colours and sadly the remote won’t work. I need to use my phone as the remote till I get batteries!
"Smart life", is the app, hopefully your got the batteries
My led lights can blink slowly and quicky, but when is searching it the app, it takes a tic of time and keep in the first step, and then there’s a message saying “doesn’t coonect “
me too
Same
No matter what I do and which instructions I follow, the Magic Home RGB Wi-Fi controller is not detected by the Smart Life app. On the other hand, the controller is identified in a few seconds by the Magic Home app. :-(
Same here
Did it work
@@vincky7408 did you manage to fix it
@@xerfanrx No. Gave up.
@@xerfanrx No, apparently it only works with the magic home app :(
Pls between Bluetooth and wifi about led light strip
Wi-fi must using the data or mb when u want to using or once only
Thanks 😅😅
It didn’t show me stop lights. It showed me strip lights w couple names on then. How ?
thanks for the video but i couldnt keep up at all.. you were doing the steps way too fast i had to slow the video to half the speed and my lights still dont blink, also it says to turn off and on 3 times but you did it 5 times please help im ready to throw them out
Half of my strip stays blue and doesn't change colors. How do I reset the entire strip so they can sync and be the same color?
Ive been having the same problem with my ligjts from mighty ape have you gound a soulotion?
I'm able to connect them fine but mine disconnects after minutes/hours.
Mine too :( At first they stayed connected for a few hours, then for a few seconds and now... well, they’re not even connecting.
@@pedrosepulvedagaete943 ya it really sucks. Especially since I have 20M of LED strip that doesn't even work😔🤣. I'm about to buy bluetooth remotes since I think the problem is with my WIFI. My wifi is possibly unstable, so I assume it's that(it'll be on a constant 50-70 ping and then it will spike to 600-1000 for a minute or 2).
If anybody knows of a fix PLEASE tell me.
Yes it is the wifi but it seems to get better it's almost like they learn how to "adapt" but it's probably just the wifi if they are wifi dependent
@@l_o_w_e_r_e_d3695 so are you telling me I should try to keep reconnecting and over time it'll get better?
@@avishaikruger4738 no it will just do it by itself
Thanks, much love ❤️
start to blink but fault to connect 😢
What is the app
obrigado
how do I get the music option? It doesn't show for me sadly...
Could i Take any Led stripe does it Matter from which Brad?
Can it be with any led lights strips ?
Yes
It's not supporting my Internet I don't know why
Thank you so so much😄
Yo save me life, thanks a lot!!!
I dont have the control ,what do I do? Don’t know how to Start it
Já fiz esse procedimento várias vezes conforme o vídeo e não funciona. A fita led não reinicia e fica o tempo todo piscando vermelho de forma lenta. Saberia dizer como resolver?
conseguiu resolver? a minha conectou a primeira vez mas desconectou sozinha e agora nada faz ela conectar
C'è la luce bianca?
Can someone explain to me why the led lights are not connecting to my wifi?
my leds are already up this doesnot work for me does anybody know
У меня диоды мигают медленно, дизайн приложения обновился и там нет, светодиодной ленты, теперь к ней приставки (BLE+WIFI, BLE, WIFI, ZIgbee) и что конкретно нужно выбрать я не знаю, но я пробовал всё. У меня не может найти сеть sl и я не могу подключить ленту
Do you need internet connection or just wifi network?
Did u figure out how to connect?
@@Harry-nu1ju you need internet to make it work. Mine worked already.
@@cn8455 what if I’m driving and don’t got wifi what should I do? I got it at home it how would I work when I’m out night driving
What’s the app
I can’t get an A19 connected
Nope dose not work
Alright solution:unplug for 5 mins and then plug in and turn off the. Hold power button until they start blinking green fast (this might take a while) then just pair it on the tuya smart app and there you go
Mine doesn’t blink idk why can someone help me
It says like light stripes WiFi and more idk what tobpresss
Like it wont find my device
Mines is blinking green red and blue helpppo
why is my app in a timer not a percentage?
Me too
Can someone help me pls. I have lost my remote controll and when i turn my led lights on they go blue red green they dont blink and when i try to connect it it doesnt. Can someone tell me what to do?
i cant get mine to enter pairing mode :(!
Nice chanel
My leds don't turn on
OH MY GOD TYY
Ty
How do you connect a hot spot to the wifi
Install what app
I cant understand about the possword
Mine doesn’t blink💀
Hi i do it but the lights dont blink to reset
Same
My led strip won’t start blinking pls help.
@issa Zamaan did you already solve it
mine flash green bro
Hi, I did everything you did. But my controller doesn’t show up in the smart life app.
Mine won’t work either. It keeps saying connection interrupted
@@gloryhiggins4758 But mine isn’t even showing up in the app. I don’t have the version with a controller so I have no clue how to enter pairing mode. They doesn’t flash one color. They flash rgb colors when I unplug/plug 5 times
@@vincky7408 this is what I did to get them to flash. I press the power button to turn them off and I waited 10 to 20 seconds and then I went and held down the power button for eight seconds. then they turned on just red and I waited a couple seconds and they started blinking… But then they wouldn’t pair
@@gloryhiggins4758 That’s very strange. Did you try using the tuya app instead of smart life?
@@vincky7408 no but I’ll try now