LightBurn Wireless Bridge - Wireless connect the Laser Engraver and Lightburn
HTML-код
- Опубликовано: 7 сен 2024
- Fully Wireless Bridge
Wireless Video Streaming & Wireless Data Transmitting
Supports wireless connection between the laser engraver and LightBurn, enabling wireless engraving and cutting. Additionally, it supports wireless video streaming to LightBurn via Splitcam software, allowing for wireless positioning and tracking.
Splitcam Software Download:
windows splitcam.com/w...
max os splitcam.com/m...
*Important: Do not update to a newer SplitCam version, as it may cause issues.
Video Streaming URL:
Please enter the IP address of the Lasercam webpage in the following format (only replace the {} with the IP address):
{Camera IP address}/ipcam/mjpeg.cgi
For example: 192.168.0.93/ipcam/mjpeg.cgi
#lasercam #lightburn #lightburncamere #laser #lasercutting #laserengraving
I can confirm I have been testing this for 8 weeks. It controls lightburn extremely well. Well done, Mintion Russell Norfolk Uk
More detail steps, you can reach this article to check:www.mintion.net/blogs/laser-engraver-camera-guidelines/mintion-lasercam-fully-wireless-connection-with-lightburn
Thank you very much! But what is to do, if the object is very high? Positioning is getting more unprecise if the objects getting higher and higher. My laser has a Z-axis. E.g. I have a wooden box with a height of 142mm. But I cannot possition with the cam now
I'm facing the following isssue : i can't find the SplitCam Video Driver within Lightburn. I was wondering if there was anything special to do within SplitCam or lightbrun.
Thank you for help :)
so you have to go to lightburn settings ..choose Edit then settings and at the bottom you will see camera capture system - change to default and now it will show up..your welcome