Use spray adhesive besides glue sealing. It works better. First build model, spray with adhesive and then use lacquer. You can still use liquid glue on the tabs but Elmer’s glue does not work.
Hello, I have another technique and I recommend it. Cover the model in clear glue when finished, or either un-cutout on the paper. Let it dry then seal it with mod-podge. It works!
Out of curiosity, how can you get the Mod Podge to not show any streaks? I've been trying to do Mod Podge first and then a lacquer spray. But it seems like whenever I spread the Mod Podge with a card, it always leaves lines along it (probably due to any roughness on the card or some other reason).
@@CPS747-8that’s why make sure nothing is on the paper. even if you leave tiny crumbs or specks, it will create lines that don’t have any glue on them because they block the mod podge from the paper
just superb....i have a few questions to ask....1) i use really heavy paper 300gsm for my models which make my models extremely rigid and plasticky and this paper has a gloss waxy finish so is it necessary to clear coat? 2) what if i apply the clear coat in the initial stage before cutting the paper when its fresh out of printing? 3) how can i clear coat the models which are already made, i mean i didnt seal them with glue earlier?
justo lo hice hace unos días sin usar pegamento y quedó horrible jajaj, creo que debí haber visto tu vídeo primero xD excelente ahora sé como hacerlo!!! gran trabajo!!
@@Hermercraft hello Hermes craft I know it's been 7 months when you last uploaded but I have a question to ask. The glue tip won't work on me the colors of the paper gets all over the paper and it destroys it what should I do?
And yes,can i use another company eg:Not That tje sme BOSNY company i will use another but clear spay ok? not the same you use but the mark is same clear too 100
Hi Hermercraft, I hope you'd kindly answer my question. I was wondering if you have any tips when joining the very last bit of the fuselage. Because attaching the very last bit means there is no opening for my fingers/tweezers to make sure the inner glue tabs stick to the last part. I hope you know what I mean by this.. Thanks! Also thanks a lot for the 3 tips papercraft videos, I find them very useful for a beginner :)
Thats good to hear. And I dont know, its also hard to me sometimes. you have to insert the last piece of the fuselage already built to attach it to the rest of the fuselaje, and just let it dry after gluing it in place
Please answer this quit while you do the glue part and let it dry does your fingerprint still remain on the paper when I did it with a4 standard officer paper it had my fingerprints of it please answer quick I'm launching my project very soon
Besides sealing with glue, you can just build your model, then spray it with clear spray adhesive, and then spray with lacquer. Sealing with glue easily wastes the glue. You can still use liquid glue on tabs and other stuff. Elmer’s glue does not work
Hi, I'm planning to use this technique in my future projects, but there are many options that come down to the same result, but my main concern is that if I can use Plastikote clear Acrylic high glossy spray paint since it seems to be the non-toxic option. Many thanks
Besides sealing with glue, you can just build your model, then spray it with clear spray adhesive, and then spray with lacquer. Sealing with glue easily wastes the glue. You can still use liquid glue on tabs and other stuff.
3 meses despues respondo al comentario jaja. Muchas gracias por su apoyo amigo, que bueno saber que le he ayudado a hacer mejores modelos, que son excelentes
Olá Hemercraft, sou um grande fã do seu trabalho, já fiz vários papercrafts, porém, somente 1 avião que foi o Beechcraft, qual modelo me indicaria pra começar a montar, uma espécie de sequência pois quero uma coleção com todos os Boeings e Airbus. Grato e belíssimo trabalho.
Reduce The Quantity Amount Of Glue, Not Too Much Glue On Your Paper. If You Want No Dust To Go On The Glue, Make Sure You Go In A Room Where No Dust Can Get In, Use A Light Source To Find Dust Such As The Lamp Or Flashlight *( Flashlight Is Not Recommended But You Can See Dust More Clearly )*
Hi HERMERCRAFT, nice video, new subscriber. I have a doubt, the chrome effect spray is to give the paper a shiny metallic effect, right ??? You would help me a lot, thanks.
thx but what type of glue do you use plus um could you add more support on the front of dat plane because I had to cut the head off and remove the crumpled stabelizers
CamOrigamiandmore thanks. And if you want something easy make a model from paper-replika.com or if you want to Challenger yourself, try a model from canon. I would recommend you the 777, it only has 2 engines and the model is big, so it is easier.
Sipk Ipk Besides sealing with glue, you can just build your model, then spray it with clear spray adhesive, and then spray with lacquer. Sealing with glue easily wastes the glue. You can still use liquid glue on tabs and other stuff.
Bing Bong Yes, you better wait until the glue dries and them make the model. If you add the glue before making the model, when you build it, the glue will not work fine on the sprayed surface.
Kevin Reyes Any will work fine. But if you can try to buy one that you can refill, if you are always buying original cartridges, it will be more economical to just refill it
hi, i keep having this problem where when i apply glue to the uncut out pieces, the paper goes all wobbly, bumpy and thin, i use less glue, thicker glue and thicker paper i dont know what to do if anyone can help?
![Nuts [YTP] | A Moana parody](http://i.ytimg.com/vi/MnIRAGodAXA/mqdefault.jpg)
Thanks for the advice, I will try it out in my future models
Papercraft Nony You're welcome. enjoy!
Use spray adhesive besides glue sealing. It works better. First build model, spray with adhesive and then use lacquer. You can still use liquid glue on the tabs but Elmer’s glue does not work.
Thanks a lot for sharing this awesome and useful videos, you're great, greetings from Ecuador 🇪🇨.
thanks for the tips man. I just finished a model and now I'm making a Iron-man model that definitely requires a shine on it.
Hello, I have another technique and I recommend it. Cover the model in clear glue when finished, or either un-cutout on the paper. Let it dry then seal it with mod-podge. It works!
Out of curiosity, how can you get the Mod Podge to not show any streaks? I've been trying to do Mod Podge first and then a lacquer spray. But it seems like whenever I spread the Mod Podge with a card, it always leaves lines along it (probably due to any roughness on the card or some other reason).
@@CPS747-8that’s why
make sure nothing is on the paper. even if you leave tiny crumbs or specks, it will create lines that don’t have any glue on them because they block the mod podge from the paper
Thanks friend for the instructions
I will use this method on all my papercrafts❤❤❤🎉🎉😂
What kind of paper is this paper you use?
Michelzinho gamer 160+ grams white cardstock paper
@@airindiafans7686 Thank you for the information
Thank you Hermercraft for this advice l will be doing this for my paper craft models
Your works are amazing, i really love your models & ideas.❤❤❤ Can u make model of Indigo and Spicejet plz.☺😊😊
huge tips on the glue part , tks alot ^^
Nice and good job, I am building mostly F1 cars, but that airplane is awesome man...
Hermercraft I think you are the king of papercraft
Hehe thanks
just superb....i have a few questions to ask....1) i use really heavy paper 300gsm for my models which make my models extremely rigid and plasticky and this paper has a gloss waxy finish so is it necessary to clear coat? 2) what if i apply the clear coat in the initial stage before cutting the paper when its fresh out of printing? 3) how can i clear coat the models which are already made, i mean i didnt seal them with glue earlier?
justo lo hice hace unos días sin usar pegamento y quedó horrible jajaj, creo que debí haber visto tu vídeo primero xD
excelente ahora sé como hacerlo!!!
gran trabajo!!
Emanuel G. gracias y espero que le sirva mejor esta técnica para un mejor acabado a sus modelos
@@Hermercraft hello Hermes craft I know it's been 7 months when you last uploaded but I have a question to ask. The glue tip won't work on me the colors of the paper gets all over the paper and it destroys it what should I do?
That Klm 777 looks sick!
And yes,can i use another company eg:Not That tje sme BOSNY company i will use another but clear spay ok? not the same you use but the mark is same clear too 100
Crypto Playz Yes sure. Bosny is what I can buy, but if you get another brand, you can use that brand
U R THE BEST
You are an gr8 artist of that
Wow
I in vietnam can I use a atm spray
I don't think it's necessary for hard paper because I tried it and it's still ok
Thanks !! Nice tips bro !
I do print my models ad glossy foto paper. 200 gr. So i dont have to spray it after with transparant laquer. And the models are very nice.
After these years of fail i actually need to print with a "hard paper"....
I want to die...
@Hermercraft whats the name of the "Hard Paper"?
Hi Hermercraft, I hope you'd kindly answer my question. I was wondering if you have any tips when joining the very last bit of the fuselage. Because attaching the very last bit means there is no opening for my fingers/tweezers to make sure the inner glue tabs stick to the last part. I hope you know what I mean by this.. Thanks! Also thanks a lot for the 3 tips papercraft videos, I find them very useful for a beginner :)
Thats good to hear. And I dont know, its also hard to me sometimes. you have to insert the last piece of the fuselage already built to attach it to the rest of the fuselaje, and just let it dry after gluing it in place
Skip the glue sealing and use some clear spray adhesive instead. Glue sealing can waste your time for more models.
I like to use glossy photo paper. Thy works too be it can get expensive sometimes
Thank you for all your vidéos
Thank you for the tips, or if you dont wanna use spray, you also can use glossy hard paper
Yes, but the colors will fade easily, if you use spray, it protects the colors and gives gloss
I immediately quit because I can’t buy any hard apparel during the pandemic
I really tried making models with hard paper but it's harder than office paper.
Why you not open a online shop. (Only paper model plane).
Thank you Hermercraft buddy 😀😀
How about using spray glue then finish with clear coat?
Hermercraft Can I Use 120 - 130 gsm paper cuz no 160 gms paper is in my country, and pls tell me what you use for editing Pls Tell Me Thank you.....
Crypto Playz yes, sure. any paper from 120 to 180 grams is ok! and i use Photoshop to edit the livery
Incredible my friend. It looks like plastic!!! Well done!! Greetings from Brazil!! :)
Antonio Maciel Thanks amigo! I'm glad you liked it 😁
Can we make airplane model with 60 gram paper
How do you put the glue on without the ink spreading?
what did you spray
I always have problems when i'm trying to put the tail on my planes.
Please tell me how can i do it without messing my whole model?
Did you try adding toothpicks?
can I use the clear glue for it?
evan liu yes
Please answer this quit while you do the glue part and let it dry does your fingerprint still remain on the paper when I did it with a4 standard officer paper it had my fingerprints of it please answer quick I'm launching my project very soon
Fcb_Pro No, i didnt get my fingerprints. You should use hard paper to avoid that. And also add glue by using a card of a flexible piece of plastic
Thanks im starting it today
Besides sealing with glue, you can just build your model, then spray it with clear spray adhesive, and then spray with lacquer. Sealing with glue easily wastes the glue. You can still use liquid glue on tabs and other stuff. Elmer’s glue does not work
Question when I put the a glue on that printed paper the ink start to bleed but why yours don’t bleed?
Hi, I'm planning to use this technique in my future projects, but there are many options that come down to the same result, but my main concern is that if I can use Plastikote clear Acrylic high glossy spray paint since it seems to be the non-toxic option.
Many thanks
Nice video! But why a sunny day? Does your 160gsm paper have ColorLok? Because when I applied the glue like you, the ink got smudged not like yours...
S. Liew if you spray at night or a foggy day, the spray will not cure the same and you wont get that shiny effect
S. Liew thats why you need to be careful with the quantity, if you use too much the ink may get blurred
Okay, thank you very much
Besides sealing with glue, you can just build your model, then spray it with clear spray adhesive, and then spray with lacquer. Sealing with glue easily wastes the glue. You can still use liquid glue on tabs and other stuff.
@@airindiafans7686 spray adhesives are so expensive though
Exelent video from papercraft
Holaa; una consulta para un mejor brillo es mejor entonces aplicarle una capa de silicona y despues el spray?
Pero al momento de agregar la goma, la tinta del papel puede correrse y despintarse la imagen
Does Elmer's School glue work with this technique?
Otto von Bismarck it does NOT work, Elmer’s school Glue can easily be absorbed by the tabs and spread ink
How to stop paper from wrinkles
Dick Tator use wrinkle free glue
Can you put the Vietnam airlines paper template full in the description box . I am not getting so can tell where did you get the template from?
gracias por esos tips amigo, en tu canal fue donde aprendí que papel usar y como engomar las hojas.
3 meses despues respondo al comentario jaja. Muchas gracias por su apoyo amigo, que bueno saber que le he ayudado a hacer mejores modelos, que son excelentes
Hey Hermercraft
How can I get 160gsm paper?
You can get from any store that has paper or buy online
Olá Hemercraft, sou um grande fã do seu trabalho, já fiz vários papercrafts, porém, somente 1 avião que foi o Beechcraft, qual modelo me indicaria pra começar a montar, uma espécie de sequência pois quero uma coleção com todos os Boeings e Airbus. Grato e belíssimo trabalho.
Gostaria também de sugestões sobre qual espessura de papel usar para os modelos e se usa alguma tecnica de colagem. Grato.
Can't gloss photo paper be used?
When I cover the pieces with glue they just get the ink off. And a lot of dust appears out of nowhere. How can I fix this?
Reduce The Quantity Amount Of Glue, Not Too Much Glue On Your Paper. If You Want No Dust To Go On The Glue, Make Sure You Go In A Room Where No Dust Can Get In, Use A Light Source To Find Dust Such As The Lamp Or Flashlight *( Flashlight Is Not Recommended But You Can See Dust More Clearly )*
Doko ni shutok suru inkurūdo klm 777 ni 5:08?
Thanks a lot i think im too ready to make another plane
Hi HERMERCRAFT, nice video, new subscriber.
I have a doubt, the chrome effect spray is to give the paper a shiny metallic effect, right ???
You would help me a lot, thanks.
Hermecraft una pregunta es laca lo que usas para hacerlo brilloso?
Varniz en spray, creo que le llaman laca tambien
Can we use A4 sheet
thx but what type of glue do you use plus um could you add more support on the front of dat plane because I had to cut the head off and remove the crumpled stabelizers
That is a liquid glue. And why did you removed the head of the plane?
Is this how ur planes look more like plastic than cheap paper
Brilliant. Thx
where do you get these from
That model is from canon creative Park, and some other models were designed by me
@@Hermercraft thanks do you know where i can get lufthansa papercraft
But hard paper will not fold to easily
Thank You .I try this.
hmm... how do I resize a template?
What if you use office paper?
Hi hermercraft. Which color of lacquer spray are you using, thanks
thank you very much for the tips.
yo bro for some reason on my color print any type of glue or water turns into like a reddish brown stain
Please answer me.... What if I completed building my model, can add glue on the completed model and then wait for dry and apply spray
Can we just take 80 gram paper and take another then glue them together to get 160 grams?
my printer can't handle cardstock :/
That’s what I do. You can.
My printer can’t Handle cardatock either
Hello hermercraft is it possible to stick normal paper on hard paper
For this model you didn't cut off the tabs.
Kevin Reyes No. when you do that you get a better result, but you'll spend a lot of time more
You make the best paper craft videos out their! What would you recommend as an easy shorter project to start me off with my first paper craft.
CamOrigamiandmore thanks. And if you want something easy make a model from paper-replika.com or if you want to Challenger yourself, try a model from canon. I would recommend you the 777, it only has 2 engines and the model is big, so it is easier.
Hermercraft Ok thank you. You have motivated me to make a paper craft jet. Wish me luck!
CamOrigamiandmore Nice! best luck and enjoy. And be patient 💪
What spray u have use??
Sipk Ipk he uses Lacquer Spray (Clear, High or Semi Glossy)
Sipk Ipk Besides sealing with glue, you can just build your model, then spray it with clear spray adhesive, and then spray with lacquer. Sealing with glue easily wastes the glue. You can still use liquid glue on tabs and other stuff.
hi I am a new subscriber
Hello! welcome to my cannel, and thanks for being a subscriber
Can I Use A4 paper
Can i use another lacquer(Toa Spray) spray with out using the bosny lacquer spray?
are can make papercraft use the 150 g, in my country idk where i can found paper 160 g? please say i need know a bout that
It's OK, any paper from 120 to 180 grams can be used
@@Hermercraft thanks, im sory for my english cause i indonesian
Goood. Can you make Korean Air by any Korean Air?
Hey what if I directly print on glossy paper??/ Also thanks for the video i was going to make the same mistake !!!
What is the size of the papers do you use for a320 Vietnam airlines ?
I had tried it before but instead of laquer spray i used fixative spray
Did it work?
Hermercraft I guess not
Lacquer spray works better, fixative spray is not too good for model making, it does not have a hard finish. Lacquer works better.
Can you apply the lacquer spray after the glue, or do you have to wait until the model is finished?
Bing Bong Yes, you better wait until the glue dries and them make the model. If you add the glue before making the model, when you build it, the glue will not work fine on the sprayed surface.
Okay, thank you.
Besides sealing with glue, which wastes your glue and time, you can skip the step, build your model, spray with a spray adhesive, and then add lacquer
Thanks for the tips 👍
You're welcome!
Can I use the 180 gsm paper to make the papercraft?
yes sure
You can also use 300 grams
my printer cant handle harder paper so i can only use 80gsm :/
also i dont have the spray but glue itself works amazing
Whats the spray name
Oh ok, also in your opinion what small cheap printer is best for papercraft.
Kevin Reyes Any will work fine. But if you can try to buy one that you can refill, if you are always buying original cartridges, it will be more economical to just refill it
😲😱😱 siempre quise saber cómo le hacia, yo solo les ponía la capa de aerosol acrílico y me preguntaba por qué no quedaba igual. Gracias!!!!!!!
Emi Lop jeje aquí tiene las respuestas. Que bueno saber que le sea de utilidad el vídeo 😀
Does lacquer spray harden the paper?
Anyway...
Now where do i find 160 grams paper?
I got it at a local bookstore
how do you print stuff on carstock
That cardboard has the same size than a sheet of paper, so I print it like printing any other document
Muy buen trabajo siempre, tambien fui a Ifa
Muchas gracias y excelente, que carrera estudió?
@@Hermercraft estudie TCP
I have only one doubt, How does he repaint those liveries?
hi, i keep having this problem where when i apply glue to the uncut out pieces, the paper goes all wobbly, bumpy and thin, i use less glue, thicker glue and thicker paper i dont know what to do if anyone can help?
are u from vietnam???? why do you have a papercraft of vietnam airlines
Im from Costa Rica
@@Hermercraft why u have a image of my airline papercraft, i'm from vietnam
Seu trabalho é fantástico.
Juvanildo de Lima silva obrigado!! 😁
@@Hermercraft
What is the name of the glue exactly?
Thank you very much for the advice, a like would help me a lot.