20 minutes of sheer admiration. Attention to detail and foresight of the interior colour change. The car is spectacular. You should be so proud of you achievement.
I love the e30 and e36 models a lot! This color in particular is very cool too for the e36. There's nothing like doing car work with some of your buddies from a home garage. The shared passion is so awesome. Thanks for sharing your restoration journey with your ride.
Very well done. I love the green. I love the red. Not sure I love the red with the green, though. I am just an old dog, though. I love the tan or the Modena best with that green. Again, beautifully done restoration.
You just gave me a walk down memory lane. I had a 1997 in BGM with the same interior combination that you took out of the car. mine also had the wheels you put on and I really wish I kept that car all these years later. this was really cool to watch!!!
Well done, that "M3 Green" goes back to the rare E36 M3 GT - taking it back to the mothership of E36 M3's. The problem is the red. In the M world, that's like a wrong note on a piano. Go black or cream - you can not go wrong with that if you want to bring it home to 90's M vibe.
Couldn’t stop watching. A bit surprised that you had to go back after the rod bearings. Guessing the chain made so much noise you couldn’t hear the rods.
Hats off to you my man. I can only imagine how tiring it was... I did some diy refurbishment work on my E39 and it took weeks. Now, I sigh as I look at my E36 and think of all the work I'd have to put into it. I have half a mind to just sell off the E36 and just keep only the E39... Either way, excellent video man. I enjoyed watching it. What a lovely minty E36. I'm also glad you kept it Boston Green. 👍🏼
Amazing job and beautifully done. It's nice to see these cars getting the love they deserve!! I had a 97 Boston green M3,...many awesome cars since, but that is the ONE that got away. 👍🔥
did not know there was such a big difference between a euro m3 and us model, is that a 3.0L 240hp ? over here it was either 3.0L with 286 or later 3.2L with 321 hp, and also M-power stamped on the valve covers. Nice build, it was a pleasure to watch !
Horsepower at over 500 -700hp does not work for your euro aluminum blocks. State side every e36 is an Iron block ,we boost way past what your motors can endure. Euro spec throws double vanos codes none stop ,even without boost or it blows up due to shit rod bearings. The s54 is a junk heap of a motor. The e46 m3 Is a chandelier that sounds terrible! Also our roads are far superior to Europe, high horsepower motors can actually be used.
You did a very very nice job it look hard but paid off I guess. Would you be able to tell me what colour exactly you used? Please and great job on the car
Great video, the new rims ehhh lol the BBS style was nice. but the green wasn’t a bad color I just don’t get the red interior like man it just dosent go with that green or the rims but that’s just me.
I say you just need heavier oil to cushion the rod bearings due to high g forces on them; I use straight 30 weight and fixes all tick on my vehicles! Know it cushions it, no lugging rattle if in too low a gear! The cam probably needs some extreme pressure lube which is why it is in Lucas oil treatment, Hint! Let's make this a good rumor! Less work duh! Cheers! :)
How much time & money it took you to do this amazing job?! The car looks absolutely stunning! I’ve never really owned a car, and I’m looking forward to own my fresh (as fresh as yours hopefully) bimmer one day! I’m almost 24 y.o and don’t have a car yet to live my dreams … thx to my country that gave me too many chances to choose from and a luxurious life to live lol
@@TatOhanyan are you that thick? green is racing green as a descriptor in cars.... unless its bright green. And that red interior makes you look like a Christmas clown ngl... so go ahead and built it for your colour blind self guy
20 minutes of sheer admiration. Attention to detail and foresight of the interior colour change. The car is spectacular. You should be so proud of you achievement.
I wasn't expecting bright red on the interior, very creative. Fitted nicely the outside color. This car is amazing, great job!!
No
My jaw is on the floor. I’m in complete awe at the level of detail and the depth of skill sets you put on display. Bravo 👏👏
You worked very hard my friend. Well done on a fine job. You have saved another E36 M3.
🙏🏻🙏🏻
I love the e30 and e36 models a lot! This color in particular is very cool too for the e36. There's nothing like doing car work with some of your buddies from a home garage. The shared passion is so awesome. Thanks for sharing your restoration journey with your ride.
This was real satisfying watching this come together, great work there 👏 the colour combo is absolutely 🔥 love it!!
Thank you 🙏🏻
ok
Be more satisfying pulling panels straight and not using a Cuban amount of filler /bondo
Very well done. I love the green. I love the red. Not sure I love the red with the green, though. I am just an old dog, though. I love the tan or the Modena best with that green. Again, beautifully done restoration.
You just gave me a walk down memory lane. I had a 1997 in BGM with the same interior combination that you took out of the car. mine also had the wheels you put on and I really wish I kept that car all these years later. this was really cool to watch!!!
Well done, that "M3 Green" goes back to the rare E36 M3 GT - taking it back to the mothership of E36 M3's. The problem is the red. In the M world, that's like a wrong note on a piano. Go black or cream - you can not go wrong with that if you want to bring it home to 90's M vibe.
Truly inspirational. Well done, you saved another e36 M3 and given it a new lease of life.
Thank you!
3:22 You did all of that SOLID ASS WORK!!! Just to NOT do the head gasket while you have the engine out…. Damn bro.
Shut up
really loving the build
i can really see that you build it with love and did such an amazing job with the details on this
Great job!
And you did the most important thing... you turned the car into a manual ;)
Keep up the good work!!
Wow 👌 👏 that was amazing! Motivated me to get off my duff and finish mine.
Great teamwork, gentlemen; A masterpiece was created.
That was AMAZING! Quality work guys.
Maan this is so amazing!! I wish i could do this. So much respect to you and thank you so much for this.
I have a silver e36 2.8i, I can’t wait to start restoring it 🎉
Awesome build, one of the best I've seen for an E36.
Thank you!
wow
Couldn’t stop watching. A bit surprised that you had to go back after the rod bearings. Guessing the chain made so much noise you couldn’t hear the rods.
Respekt !!! Wer so sein Auto liebt, verdient Respekt ! Unsere BMWs sind die besten 🙂
The car turned out very well. I bet it draws a lot of attention.
Great consistent work. Loved watching this transformation ❤
So so amazing!! Great job guys!! Would love to send my e36 m3s to you!!!
Amazing job! Congrats!
How many months did this build actually take irl?
Awesome work!
Like 4 months maybe
Hats off to you my man. I can only imagine how tiring it was... I did some diy refurbishment work on my E39 and it took weeks.
Now, I sigh as I look at my E36 and think of all the work I'd have to put into it. I have half a mind to just sell off the E36 and just keep only the E39...
Either way, excellent video man. I enjoyed watching it. What a lovely minty E36. I'm also glad you kept it Boston Green. 👍🏼
Amazing job and beautifully done. It's nice to see these cars getting the love they deserve!! I had a 97 Boston green M3,...many awesome cars since, but that is the ONE that got away. 👍🔥
Dream car, dream build. Great taste, very well executed my friend!
Watch this as a fellow E36 M3 owner, I can only hope you used FCP Euro for all the parts. Amazing job.
Mixture of ecs and fcp
Hello wondering how or where did you get the chairs and the inner vinyl plates? Really cool results 👍
L-seat
Wow wow woooww... congrats. Perfect art job!
Amazing transformation
Whats wheels it had? A bbs rc 090 or another?
Yes rc090
Great video!!! I honestly enjoyed every second of that video! Car looks great man!
GOOD BOY!
switching it to manual...
did not know there was such a big difference between a euro m3 and us model, is that a 3.0L 240hp ? over here it was either 3.0L with 286 or later 3.2L with 321 hp, and also M-power stamped on the valve covers. Nice build, it was a pleasure to watch !
Yup huge difference, the e46 m3 s54 is actually based on the euro s50/s52
top
Horsepower at over 500 -700hp does not work for your euro aluminum blocks.
State side every e36 is an Iron block ,we boost way past what your motors can endure.
Euro spec throws double vanos codes none stop ,even without boost or it blows up due to shit rod bearings.
The s54 is a junk heap of a motor.
The e46 m3
Is a chandelier that sounds terrible!
Also our roads are far superior to Europe, high horsepower motors can actually be used.
@@vanillaice887 bro, i think you’ve never been to Europe 😂
@@Seba-wn3vl boy or girl ? Can't tell ??
Man, the detail. How long did it take you and your team? Also, have you posted any vids of it running? Thanks
Like 4 months
Wow man you are so good you do so much, people thhink you build a new car
You did a very very nice job it look hard but paid off I guess. Would you be able to tell me what colour exactly you used? Please and great job on the car
Bmw boston green
What a build she looks beautiful 😍
Love the build ! Did you get aftermarket seat covers? If so where, they look great and I need some for my 99.
Thank you! Yeah i did, got them from Lseat.com
Like a pro! Congratulations from Brasil
dream build right here what a beauty!
really nice build bro, any reason you didn’t want to go with the depo halo lights?
Just didnt want to spend too much money on the car since i was planning on selling it
Aper it makes me happy seeing that your removed the stupid tunnel insulation that crumbles and falls in my face anytime I go near the transmission 😂
e36, timless beauty!! 🧿
Dang nice job on the car and the video 😮
Amazing work bro!👏 Also really creat content, you definitely deserve more subscribers.
Wauw, you guys did an amazing job! Excellent.
No to rear wing, no to red seats. Other than that, impressive build.
Nice work, I´m not shure about Green and Red, but there is something ;-)
Thank you lol its not for everyone
Enjoyed watching and the billion hours into this. Congrats. Too bad you didn’t catch the bearings when engine was pulled.
Muy buen trabajo xavales!!!
WOW great work there
Do you have a cost breakdown for this car? and a parts list?
I've found an abandoned Nissan 240 sx and I really wish if I can fix it like that but idk how and where I should start by
that's as close to a factory rebuild as it gets!
wow. I have a lot to do. Props to you.
Shat lavna axpers! Just got a 4dr today myself, great work, subbed😎💪🏼
Merci axpers! 🙏🏻
Great video, the new rims ehhh lol the BBS style was nice. but the green wasn’t a bad color I just don’t get the red interior like man it just dosent go with that green or the rims but that’s just me.
very good job dude,i wonder if you have an estimation of the costs for this beautiful build..
Thank you! I havnt calculated everything yet
work in the USA goes fast ...20min and an awesome car ready to go :)
😂😂
Where did you source the trims? Especially on the rubber door seal and back side window trims?
Ecs tuning
I say you just need heavier oil to cushion the rod bearings due to high g forces on them; I use straight 30 weight and fixes all tick on my vehicles! Know it cushions it, no lugging rattle if in too low a gear! The cam probably needs some extreme pressure lube which is why it is in Lucas oil treatment, Hint!
Let's make this a good rumor! Less work duh! Cheers! :)
That was probably good Work !
огонь!колоссальный объем работ!
nicely done, but making us wait until the end for you to actually wash the car was painful…
I washed it multiple times lol why would i put it in the beginning of the video !?
sick build!
Amazing, nice job 👍
so much work good job bro
Thanks bro!
Stunning
Nice job bro
Was that an MPower Engine?
Bad ass thats a lot of work
Thank you!
Excellent job full satisfied
Nice work bro!!
Thanks bro!
This thing is clean what coilovers are those btw?
Maxpeedingrods
Stunning.
Who upholstered the door cards? I need mine redone!
Local upholstery shop
How much time & money it took you to do this amazing job?!
The car looks absolutely stunning!
I’ve never really owned a car, and I’m looking forward to own my fresh (as fresh as yours hopefully) bimmer one day!
I’m almost 24 y.o and don’t have a car yet to live my dreams … thx to my country that gave me too many chances to choose from and a luxurious life to live lol
Spent about 7k on it
@@TatOhanyan that’s really nothing at all for a gem like yours … I’d sell a kidney for such car, lol … no for real, knock on wood
what was rattling in the engine?
That's a 328i with a M3 badge on it.
Lol
@@TatOhanyan you have the m50 engine in it, i hope you knew that before buying, otherwise yikes
@@firemike2155 its an s50. I put the m50 engine cover on there.
Maxpeedingrods coilovers on a 20k+ car thats sad …. Otherwise great build i really enjoyed the video💪🏻
Turned out clean af aper
Thanks bro!
Abren axpernere shat) uzhex gorc ariq😍
Merci axpers 👍
man subbing for your incredible work and video... but nearly unsubbing for that combo wtf are you thinking with the red int on racing green? blehhh
Its not racing green, and i didnt build it for you 😂 looks completely different in person
@@TatOhanyan are you that thick? green is racing green as a descriptor in cars.... unless its bright green. And that red interior makes you look like a Christmas clown ngl... so go ahead and built it for your colour blind self guy
Car parts names please ?😢I want to start my project also
Superb well done .
Great stuff, subbed.
AWESOME!!!!
How can you have so much knowledge
🤷🏻♂️🤷🏻♂️
Very very good
sick build now if only i could find an m3 that isnt super overpriced lol
How this is m3 with m50? It’s need to be s50
Do you work on cars for customers?
Yes, depends
@@TatOhanyan I live in Torrance. Let me know, I own a few of these and an e46. Id love to talk about sorting some special cars
How much money you needed for this project?
7k
Xosqer chkan Axpers anporcanq shat ujexa Eghel 👏
Merci axpers!
Name of wheels bbs something? What is the name of the bbs looking wheels i want those for my e36
Bbs style 5
Willing to sell the bbs?
Yeah most likely
Where can I find a e 36 like how you found it
Anywhere, just be on the lookout for one
Yo just seen ya at the smog shop by Sinclair I live down the street bahahaha
Lmaooo small world
Yup sure is lol just followed you on ig