ELEGOO Neptune 4 Pro: How to adjust the eccentric wheel of Z-axis?
HTML-код
- Опубликовано: 28 янв 2024
- Join our official Neptune series printers group: / elegooneptuneseries
.
Follow our official Facebook account to stay up to date with promotions and giveaways: / elegooofficial Наука
For anyone having issues with loose Z belts after this, when tightening the brackets at 1:16 make sure to push them flush into the corners (essentially slightly pulling the belt tight). This worked perfectly for me and the belt is as tight as it was before and I successfully adjusted the eccentric wheel.
You are a legend! Woke up to this comment, have done exactly that, and now its PERFECT.
What do you mean by push them flush, what is them, do you mean the belt and wheels? Thanks!
@@Stilkdog I loosened the brackets, and when tightening them again, pushed the bracket as to tighten the belt, and then tightened it. Did that to both sides and it's perfect now
@@NathanAnnandale Awesome glad it worked!
Having no sound on the video is weird and a bit lazy
True they could have at least put sneaky snitch from Kevin Macleod
Nope this is perfect. The other video they use horrible music, so i prefer without.
I've been fighting this thing for months. No matter how I level the gantry a wheel on one side is always loose.
This is for when the wheel tension can’t otherwise normally be adjusted, it’s not to make the normal adjustments to the eccentrics, but for when the eccentric adjustment itself isn’t adequate.
Aghhh - did this, but it moved the loose wheel from the right hand side to the left hand side. But clearly it does make an adjustment so will try again.
Where to get this model???
Does this work for neptune 4 non pro?
what does this fix?
Does not work. Lower wheel still loose.
Why aren't linear rails installed straight away?
@elegoo make those tools and blocks available for purchase
I used Lego bricks. They're perfect for the job, 20x 8 dot wide blocks each side
I can't print the calibration parts because z axys knocks them down) okay, I'm kidding, there's a place to print them, thanks for the instructions
Not working + my z Axis belt now is too lose
Did you resolve this?
Did the video exactly as they said now my z belt was soooo loose too.
@@NathanAnnandale Check my other comment, got them tightened back up
Terrible quality. I have one. It could not fix. One of openbilts wheel has not enough eccentricity. It couldn’t contact to vertical aluminum stand. And it makes wobbling.
I've been having alot of issues with mine. Mostly retaining to z wobble.
What?…
Не працює.