SolidWorks Sheet Metal tutorial calculate hopper in Flat form

in this tutorial video we will lean about Solidworks sheet metal features like Sheet metal Lofted Bend, Edge Flange which is going to calculate the Hopper in flat form.
Please subscribe our channel for more videos and projects in Solidworks. Please Like and share Our videos.
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook page.
/ cadcamtutorial
Subscribe our RUclips Channel.
/ cadcamtutorial

[@papaveneti7759]

Thanks a lot. Didn't know how to make the flanges "90" degree. The trick with the surface helped me a lot. Have a nice day

[@pinchasnayman9110]

A wonderful teacher ... and the lesson is excellent

[@asathomasadgamaya2517]

Thank you so much, really looking forward to how to change sheetmetal dxf format in solidworks, in every tutorial just went through the different tools, here its finalised, tutorial is simple but effective

[@johnwalter9527]

Sir, Very detailed demo. Thank you

[@lasmiansitumorang81]

Thank you Brother...i like the way you define Planar Surface to determine the bending angle. please share some other Solidworks sheet metal tutorial.

[@nksAiyer3956]

You r my best friend bro..helped me in critical days

[@arthurhenricks557]

Thank you man, very good job.

[@thedillestpickle]

Well done. Great tutorial.

[@Bonjevalien]

Excellent tutorial and tutor! Thanks

[@kandasamyrajan]

Thanks for the video.

[@alameen_babayo]

thank you very much for the vedio.

[@0867374619851985]

Thanks a lot sir
Very good

[@173roberto]

Amazing tutorial. Your channel has the best sheet metal examples

[@VickyDalooser]

Thanks for the video sir, please do some video for What is the new feature coming to upgraded SW. then how to use those options!!!

[@naimsalim5922]

Fantastic work brother.....please try Two-way diverter gate valve

[@dedetizadorabaratexformiga4418]

Congratulations on the videos, your videos are very good, congratulations on passing on your knowledge to an agent, but I have a question how do I do the detailing of the planned sheet, like the measures to pass on to the paper?

[@saintfaito692]

hablo español, no se ingles, pero entiendo muy bien tus tutoriales. Gracias

[@burakayan3360]

thank you for the info sir.

[@ermdallauddinansari1948]

Nice video for Beginner

[@Amarsingh-tn9oj]

Thank you sir, nice video. But plz tell me how to show dimension in flatten state.

[@forcozy]

I'm glad to see you.^^

[@svilennikolov347]

Thanks and Regards

[@tamilselvan-zy3rj]

Hi sir..nice video.plz make tutorial for sheet metal and mould tools in beginners level and tool based explaination one by one sir...

[@sheetmetalbyzaker4938]

Very very nice

[@kailaskumarl5510]

Can you post development of a transition piece of which have rectangular dimensions 4567x4328 and dia 4980 with a length of 2500

[@mosinmallick5267]

Dear sir, after flatning this part i dont get the dotted line which shows the bending portion . How do i get that thanks for making this king of videos it really helps 👍👍👍

[@rashadsattarov1729]

Perfect. How about wood/plywood template? without it ain't possible to fabricate it..

[@shehanmadhushafernando5943]

Failed to creat edge flange .Try by increasing the gap distance or checking the trim side bend if it is unchecked. This notice display when add flange to back side.could you please tell me why it is?

[@_VSYC_]

Thx

[@MDSALMAN-fe8hf]

Can u design a sheet metal coustm front bumper for vehicle, I am unable to make both side corner taper bend

[@savehcity]

Thank

[@erinovianto6566]

Sir or anyone, can somebody tell me how to make appears folding construction lines (micro join), mine doesnt shows the dash line. please, thanks in advance

[@sarjupoudel3836]

How to do if the size of duct is very large and you have to have multiple panel? Please help me with a tutorial with assembly of multiple panel for this hopper.

[@mehdimasud8640]

I am facing a problem when filleting with a radius of 47 mm. SW states that the fillet could not be added because the specified radius would eliminate one of the elements. Any solutions. I am using SW2018.

[@jaysanjaykamble6791]

Sir can you please show the drafting of this

[@MegaFaisalpk]

you said this part is going to cut on CNC turret machine.. We can cut it on CNC milling not turning.

[@devendrakumarraj4838]

How can i print the profile with the bend lines on a paper? I am specifically asking for those bend line.
Thanks and Regards.

[@3DucationMA]

Hi, I think this answer would be very late considering the date of your question, but may be It'll help someone out there with the same problem.
To get the bending lines, choose "Bent" as the "Manufacturing method" instead of "Formed". Hope that helps 🙏

[@laserflexr6321]

Nice work. Ok just send it to laser or whatever other cutting cnc you have, good part. Now, how in the hell are you gonna bend it? Fun day that.

[@nayeejatin461]

Please development videos arc development for solidworks please

[@alisaim8260]

Sir can you kindly tell me what are your graphics setting duw to which you get this shiny look?

[@CADCAMTUTORIALBYMAHTABALAM]

For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.

[@rjppanchal]

type how to make real view graphic in solid works

[@thedillestpickle]

@@CADCAMTUTORIALBYMAHTABALAM I enjoy using realview from time to time to admire my work. It isn't really useful other than to make things look cool. Do you know if it can be applied to assemblies? I have noticed that the realview option is not available when I am working within assembly, although I do have a pro graphics card.

[@avinashpattedar]

Sir can you make tennis racket.

[@valentinlishkov9540]

wmlwdp.com

[@shakuntlapatil8378]

Add both sides 25 mm faring

[@mdabir295]

How to download this software is not being downloaded
(flat pattern)

[@sagarsoni_sgr5359]

Now how to calculate blank size of the sheet?

[@thedillestpickle]

Do you mean the size of rectangular material needed? You can flatten, then create a sketch, and convert entities, picking corner points to bring into the new sketch, then draw a rectangle that encloses all the corner points.
Maybe there is more professional way to approach it, but that should get you the dimensions you need.

[@EliasHernandez-hc6qn]

Hi, nice to greet you, would you allow me to make a video in Spanish for my channel with this project? I would put the name of your channel as the source

[@musadlinimardan4502]

Hello, greetings
is it his original or pirated solidwork ??

[@valentinlishkov9540]

wmlwdp.com

[@thedillestpickle]

lol why are you suspecting it to be pirated?

[@sujitpoddar4533]

Sir our system is not showing flatten

[@thedillestpickle]

Are you working within solidworks sheetmetal add-in?