Parts Washer Upgrade

Поделиться
HTML-код
  • Опубликовано: 23 окт 2024

Комментарии • 13

  • @ProteusDIY
    @ProteusDIY 2 года назад

    This is literally the best parts washer mod video on YT. Thanks for taking the time to show all the part numbers and talk about them in detail. Excellent video!

  • @orangetruckman
    @orangetruckman 4 года назад

    Good video. Adjust a thought- if you had the ball valve close to the tank, then any sediment wouldn’t settle in the drain pipe and potentially blocking flow or plugging it. Plus you’d be able to use all the solvent and not have any residual in the drain pipe.

  • @kevclar
    @kevclar 6 лет назад +1

    Excellent video and explanation!

  • @nckeller
    @nckeller 8 лет назад

    Thanks for the detailed instruction. You rock!

  • @acscolo
    @acscolo 7 лет назад

    good job I'm going to do the same for my new parts washer

  • @tjf1531
    @tjf1531 7 лет назад

    great video

  • @inscoredbz
    @inscoredbz 7 лет назад

    what size was the pipe that screwed into the drain hole? i've heard it's a screwed up metric size & normal 1/4 pipe wouldn't fit in it. i'm getting ready to do all this to mine as well, great video.

    • @iproject1850
      @iproject1850  7 лет назад

      inscoredbz , it's in the video 🤓
      It is 1/4 inch, standard

    • @inscoredbz
      @inscoredbz 7 лет назад

      the reason i double checked is because another video on here says he had to use an adapter because it was a metric size thread. i guess i'll have to check mine & see. thanks

    • @iproject1850
      @iproject1850  7 лет назад

      inscoredbz I hear ya. HF is always changing things... sometimes for the worse.

    • @inscoredbz
      @inscoredbz 7 лет назад

      mine turned out being just like yours. 1/4" pipe worked, but the dip shits ran the pipe tap a little deeper than it needed to be & i had to wrap the crap out of it with Teflon tape & tighten the crap out of it to get it to seal.

    • @iproject1850
      @iproject1850  7 лет назад

      inscoredbz dang. Not surprised, but that's annoyingly frustrating

  • @InternetDude
    @InternetDude 6 лет назад

    Vertical video = instant 👎🏼 regardless of content