I have error : ...-> (gedit:57850): dconf-WARNING **: 21:41:46.577: failed to commit changes to dconf: Failed to execute child process “dbus-launch” (No such file or directory), what should I do..thanks
I reallllly like the way that you explain. Audiences DO matter for you. Via a knowledgeable method, without any ego, the whole video is well-explained from A-Z. It has been 6 months that I am struggling with Linux stuff from time to time. Your video is one of the best ones that I have every watched. "SUBSCRIBED" :))) Thnx
@@alessandrobeninati8018 in the video at 12:00 the path is right, but when he copies the path to that paraview.desktop file, there the path is wrong. change the path to what u had chosen the name for paraview in the ~/opt
Thanks a lot, that was really helpful. I installed Paraview-5.11 on Ubuntu 20.04 and it worked great, except I had an issue with launching paraview from the terminal. I could only use the icon. Then I found out that openfoam-10 has its own bashrc file in the /opt/openfoam10/etc/ directory. I looked at it and found a solution : just add a line in my .bashrc file giving the path to the new paraview libraries. In my case it was : alias paraview511='LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/ParaView-5.11/lib/mesa/ paraview511' Then source the .bashrc. Just in case somebody needs the tip.
Thanks. I tried this for installing paraview5-11 , the icon was built but it did not open. I see this error: qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found. This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem. Available platform plugins are: xcb. error: exception occurred: Subprocess aborted Do you know how can I fix it?
nice sudo apt install paraview also workes in hirsute hippo sudo apt install openfoam also workes but there is some issue when u type simpleFoam -help please help
@@DDFluids ******@*******:~$ simpleFoam -help --> FOAM FATAL ERROR : Could not find mandatory etc entry (mode=ugo) 'controlDict' this is what I get when I type simpleFoam -help also, I have installed openfoam from ubuntu repositories & not from openfoam repositories
hi, when I type the tar -xcvf ~... , it showed "you may not specify more than one '-Acdtrux', '--delete', or '--test-label' option ", what is this mean? thanks
I get the errors "tar: -: Not found in archive" and "tar: C: Not found in archive" and "tar: /opt: Not found in archive" "tar: Exiting with failure status due to previous errors" Is it necessary to watch a previous video where you installed OpenFOAM in a specified directory?
Do i need open foam first? edit: no need. if other stupids like me out there u can just begin the video from the downloading paraview file from official site
Hi again. I followed the same instructions for Paraview 5.10. However (12:56), when I search of the icon, the shown icon is blank and not the Paraview icon. Do you have any Ideas? ========================================== [Desktop Entry] Version=1.0 Name=ParaView 5.10 Exec=paraview Terminal=false Icon=opt/Paraview-5.10/share/icons/hicolor/96x96/apps/paraview.png Type=Application x-Ayanata-Desktop-Shortcuts=NewWindow [NewWindow Shortcut Group] Name=New Window Exec=paraview TargetEnvironment=Unity
Give the full path of the paraview; e.g., Exec=/opt/Paraview-5.11/bin/paraview and also correct the typo Ayanata for Ayatana It worked for me after I made the first change
![First OpenFOAM Simulation | Lid-driven cavity | [OpenFOAM in Windows 10]](http://i.ytimg.com/vi/8jSDvtzAAU0/mqdefault.jpg)
Worked perfectly for the 5.10.0 version on Ubuntu 20.04.3, Cheers!
Worked too for ParaView 5.10.1 version on Elementary OS 6.1.
I have error : ...-> (gedit:57850): dconf-WARNING **: 21:41:46.577: failed to commit changes to dconf: Failed to execute child process “dbus-launch” (No such file or directory), what should I do..thanks
I reallllly like the way that you explain. Audiences DO matter for you.
Via a knowledgeable method, without any ego, the whole video is well-explained from A-Z.
It has been 6 months that I am struggling with Linux stuff from time to time. Your video is one of the best ones that I have every watched.
"SUBSCRIBED" :)))
Thnx
Thanks :)
This is so great! Thank you for this video. Reproducing some comments below: there is a typo in 12:28, correct Ayatana for Ayanata.
This was really helpful as a new user. Thank you for your slow and clear steps.
I have just followed your steps and installed paraview 5.10.1. It was very helpful. Thank you.
Thumbs up 👍
Weldone sir
Thanks for this! Worked with ParaView 5.10.1 on Centos 7 even without sudo permission (I did use slightly different locations for my install).
This was extremely helpful! I am new to Ubuntu and terminal commands so this was really nice and slowly explained.
Thank you for the tutorial, it works, except for the no icon picture in the shortcut
At 12:00, there is one line for "Icon=/opt/ParaView-5.9/........" Correct that path and It will show icon.
@@divyeshvariya6533 i did correct such path but the icon is still not showing in the shortcut
@@alessandrobeninati8018 in the video at 12:00 the path is right, but when he copies the path to that paraview.desktop file, there the path is wrong. change the path to what u had chosen the name for paraview in the ~/opt
Worked with ParaView 5.11. Thank you!
Thank you for your kind explanation! :) It is really helpful.
Thank you for this tutorial ! It was concise and extremely clear !
Thanks it was really helpful
Thanks a lot, that was really helpful. I installed Paraview-5.11 on Ubuntu 20.04 and it worked great, except I had an issue with launching paraview from the terminal. I could only use the icon. Then I found out that openfoam-10 has its own bashrc file in the /opt/openfoam10/etc/ directory. I looked at it and found a solution : just add a line in my .bashrc file giving the path to the new paraview libraries. In my case it was :
alias paraview511='LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/ParaView-5.11/lib/mesa/ paraview511'
Then source the .bashrc.
Just in case somebody needs the tip.
I am doing it right now. 5.11 on Ubuntu. Thank you for the tips.
What is that "Then source the .bashrc. Do we need write this line also?
Very helpful. Thanks bhai.
This was very helpful
Thank you so much, this was great
any tips on installing ParaView 5.10 on WSL2 Ubuntu?
Thank you! Very useful!
Perfect tutorial. Thank you.
Thank you very much bruh!
You're welcome!
Thank you very much
thanks verry helpfull man
Thanks. I tried this for installing paraview5-11 , the icon was built but it did not open. I see this error: qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
Available platform plugins are: xcb.
error: exception occurred: Subprocess aborted
Do you know how can I fix it?
Isnt it possible to open and view the mesh using OpenFOAM commands in WSL? Both the paraFoam and paraview commands aren't working..
Install paraview externally in windows. I have already explained that in openfoam installation video tutorial. You can check that.
Thank You! The best!
hey, does it work without uninstalling the paraviewopenfoam56 at the beginning ?
Yes
Thank you!
thanks a million sir
nice
sudo apt install paraview also workes in hirsute hippo
sudo apt install openfoam also workes but there is some issue when u type simpleFoam -help
please help
Sure. Please explain error in detail.
@@DDFluids
******@*******:~$ simpleFoam -help
--> FOAM FATAL ERROR :
Could not find mandatory etc entry (mode=ugo)
'controlDict'
this is what I get when I type simpleFoam -help
also, I have installed openfoam from ubuntu repositories & not from openfoam repositories
You can type "foamVersion" to check which openfoam version you have installed.
Thank you.
Hi may I ask why there's no shortcut icon on the left task bar? I'm trying to install version 5.11 on ubuntu 20.04.
hi, when I type the tar -xcvf ~... , it showed "you may not specify more than one '-Acdtrux', '--delete', or '--test-label' option ", what is this mean? thanks
At timestamp 7:15, what does the -C flag stand for?
guess its for unzip, not sure
Can I follow the same procedure to install ParaView on Fedora 38?
following this instructions, the Paraview window open but closed automatically!! why?
I get the errors "tar: -: Not found in archive" and "tar: C: Not found in archive" and "tar: /opt: Not found in archive" "tar: Exiting with failure status due to previous errors"
Is it necessary to watch a previous video where you installed OpenFOAM in a specified directory?
FFS looks like it! I got rid of /opy/ and now I have a locked folder in my Home page that I cannot get rid of
👍
Do i need open foam first?
edit: no need. if other stupids like me out there u can just begin the video from the downloading paraview file from official site
Why?
thanks
thjats why I use windows. Just an exe file. Not bashrc.
cannot show icon 😭
Hi again. I followed the same instructions for Paraview 5.10. However (12:56), when I search of the icon, the shown icon is blank and not the Paraview icon. Do you have any Ideas?
==========================================
[Desktop Entry]
Version=1.0
Name=ParaView 5.10
Exec=paraview
Terminal=false
Icon=opt/Paraview-5.10/share/icons/hicolor/96x96/apps/paraview.png
Type=Application
x-Ayanata-Desktop-Shortcuts=NewWindow
[NewWindow Shortcut Group]
Name=New Window
Exec=paraview
TargetEnvironment=Unity
At the same time step, check location of the icon. I guess you need to replace "ParaView" with "ParaView-5/10"
Did you solve this problem?
Give the full path of the paraview; e.g., Exec=/opt/Paraview-5.11/bin/paraview and also correct the typo Ayanata for Ayatana
It worked for me after I made the first change
so, first, you need to correct two typos in your text, and second you will need to reboot to make it happen
@@Fernando55524 best help ever! Thank you!