MUST HAVE siding attachment
HTML-код
- Опубликовано: 30 сен 2024
- This attachment easily attaches to the end of your siding nailer. I enjoy this because I can use it for hidden nailing and face nailing. We install LP SmartSide and this attachment makes the job that much faster and takes out any guesswork.
If you enjoy the content, please cinsider subscribing to the channel! Thank you!
Link:
Nailer: amzn.to/3bAD1dR
Tip: amzn.to/3vLomDx
*commissionable link. Non sponsored.
This attachment easily attaches to the end of your siding nailer. I enjoy this because I can use it for hidden nailing and face nailing. We install LP SmartSide and this attachment makes the job that much faster and takes out any guesswork.
Where did you buy it?
@@kristengraham8840I ask the same question
Where I can get it??
Is there a link for this product, or product name etc anywhere
Little late but look up EZi-Guage
Mark your studs
Any special nails, or just regular roofing nails 1.25"?
In norway we are not allowed anymore to use nails on the boarding on outside walls. Only aloud to use screws
it's spelled allowed. aloud is like speaking out loud. the man said aloud
@@meowmixers9338 not my language so mistakes happens
Yeah Def not trying to hurt you, just figured you would want to know. English is hard and has stupid words
I quit using nails in siding about 10 years ago too. Takes longer but screws are just superior for a lasting hold. Cabinet screws work great. Has a flat enough head for laps and has enough of a smooth shank to let vinyl move too.
Why? we don't have a problem in Minnesota and I believe my state is colder than most of your country, due to being landlocked
Looks awesome! What’s the nail/gun combo you use? I’ve purchased three guns in the past week with varying nails (all recommended from Lowe’s, Home Depot, and a Hardie dealer), and none worked. All were coil guns, and the first nails bent.
A Hardie dealer here in KY sold me some ring shanks with a very wide head (looked more like roofing nails to me), and the gun I bought wouldn’t shoot them. So I bought a roofing coil gun tonight and it wouldn’t fully penetrate - even on the deepest setting. Needless to say, I’m at the end of my rope. 🤣
Would love it if you could give me the model of your Bostich and the nail specs (although I don’t need that length for my application (vented soffit paneling). Thanks!
Can do this with a zip tie as well
Yeah, that’s what I’ve always seen. Quick, cheap, easy, and “adjustable”
Specifically*. Not pacifically.
EZi-gauge
LP smart side trash
Nothing smart about that siding
Do you have to nail into the studs or do u need special nails to nail into sheathing?
We always nail into studs for LP
@@moedogger21 do you have to nail into studs for all siding applications like vinyl hardie etc?
where can we buy it?
Hey buddy !! Can I use this siding nailer on fencing too (typical wood fence) thank you 👍🏻
You should be able to, but make sure to get the right length nails
We pop lines for face reveal and shoot above the line. But this would be good for teaching people.
That's neat
Is there any one knows where I can get this attachment for nailer
That’s pretty sick
Pretty easy to eyeball an inch though
Hey man thank you for shouting out the material you are using! Looks great
No problem at all! And thank you!!
@@mountaintopremodelingwhat's the going rate to install this siding?
The gecko 🦎 clamps are amazing and a must have too.. until they start getting worn and suddenly give away dropping a full piece of hardie board off the house 12ft in the air to land on my fingers
You’ll have that sometimes 😂
A link for both the nailing adapter and the holders please!!
How do you know the right spot if you just use a hammer
How many studs are on that little wall
Make sure you dont hit a wire behind the wall
how do you know if your hitting your studs or not?
This was a remodel so we could see where the old nails were located which told us where the studs were. With this siding you can actually nail into sheathing with certain type nails
@@mountaintopremodeling Still best to use a hammer but you guys probably just prefer the quicker route
@@Saintsi in what world is it best to use a hammer for this application? What are the benefits of a hammer over a SIDING nailer to install siding?
@@Saintsiyou like working harder don’t you ? lmao 🤣
@@mountaintopremodelingi think he is saying if you use a hammer its easier to tell if you hit a stud.
What tyoe of nails do you use for smart siding?
Where did you get the tip at? I can’t find a link or the name
Como se llama lo que te alluda a sogetar el sideng
Gecko clamps
Y lo que le pone ala punta dela pistola como se llama gracias
Do you use smoth nails or ring shank?
Is there one for Porter Cable?
Can I use for fence ?
so slow.
😂😂😂😂😂
Name the tool are you using for hold the d
Siding spacing or gauging tool.
Home Depot has them for $63. Pac Tool Gecko Siding gauge for 3/8" thick siding.
@@RalphSampson... thank you God bless you 🙏
@@brownpride5125
I could use some blessing. Let's hope he isn't too busy for me.
What thickness trim is that 3/4?
Yep
Am sure you hitting 2x4 right?😮
Yep, I am. Also nailing every 8”
Get off my job site if you need that
Assuming it's not your site to begin with with that attitude
What size nail?
Looks like 2.5" ring shank. Could be wrong though.
What's name of the tip ?
amzn.to/3NMMNZc thanks for watching!
whats the name of it and where can I buy it
amzn.to/3NMMNZc. thanks for watching!
Bostitch air nail gun
Last nail didn’t set?
Are you just nailing into the ply or the studs?
Dont see any lines on the tyvek, & it looked random.
Those nails seem way too big for the job
Long enough to fully penetrate the framing
Last nail looks proud
Nah it was perfect depth
I guess you don't even try to nail into the studs let's see that siding come off in high winds
Video doesn’t pick it up but studs are marked. You can also nail every 8” with ring shank per LP install guides
I guess you are just nailing into the plywood sheating!
That hard to just nail on the provided nail line that you need a nailing tip?
The fact that you think there’s a nail line in the siding tells me everything I need to know 😂😂😂
Wouldn’t hire ya if you can’t keep it clean
Looks clean to me
You can’t even keep your ass clean 🧽 relax mr perfect
THE VERY LAST NAIL DIDN'T WENT ALL THE WAY THROUGH !!! 😂😂😂 💀💀💀
i just got good at learning where not to nail.
And where would that be? This nailing pattern meets LPs install guidelines Duane
@@mountaintopremodeling so does my nailing pattern but difference is i don’t need a training wheels attachment to help me
@@Duane_the_carpenters_Senseiso are you arguing the nailing pattern or the tip? 😂 the tip makes for a consistent and more efficient install, go cry somewhere else
@@mountaintopremodeling yu sound like the one cryin. all butthurt bc somebody dont like ur lil tike tip
Come on guys yall are way to slow with these stupid attachment you never heard of scribing a inch line on your pieces and nailing in the middle of your one inch scribe and the top of the piece yall are just getting out of hand on how slow you are how do yall make money
What you described sounds extremely slow. This actually speeds up the process and makes sure you maintain the warranty for the customer
@@mountaintopremodeling no you obviously are in the business of slow work! Make a video showing hoe much faster it is and then I'll owe you an apology
@@devinwilkerson4098 I have to take out a tape, my pencil, make a mark, put it all back in my bag, very slow. With this tip on my nailer you set it up one time and it’s good to go. No measuring at all. No apology needed my friend!
@@devinwilkerson4098 dude u probably have never worked construction in ur life thats all that is done is rh cutter cuts it passes it to you and u nail it like fhat instead of having to wait for ur cutter to mark it or u to mark it its literally a whole extra step using 2 other tools from ur bag fhat u dont need to take out but personally that tool is over kill if ur nailing siding all day everyday u know where to sink ur nails
@@devinwilkerson4098 mountain top remodeling ignore this guy you can tell he does nothing but sits in his gaming chair all day and his girlfriend runs his life cus he’s a simp so he comes on here to try and get a tiny bit of what was already very low (his masculinity) back. Looks like a good product.
Great tool but cheap gun. Get a metabol