Knife Making - Forging A Powerful Cleaver From A Longest Leaf Spring
HTML-код
- Опубликовано: 14 сен 2023
- #forging #lifeskillsdn #cleaver
Hi every one today the blacksmith is forging a powerful cleaver from a longest leaf spring then he used it to cut wire. wow It is so sharpening because It is heavy. It has :
-Length : 28 cm.
-Handle Length : 15 cm
-Weight : 1 kg
-Handle Length made from wooden
-Please subscribe my original video. Thank you so much for watching and wish you good luck - Наука
USING A CHOPPER, TO SEVER BARBED WIRE, on an anvil...YEAH, THATS PRETTY MUCH BOSS TEST RIGHT THERE.
Yes when test it is so powerful
ب
Maganda kabayan yan pang chop~chop ng mga litson baboy sa La Loma..👍👍👍
Yes really it is so sharp
That’s a really well made and strong butcher knife if it can chop up barb wire like that and shows no damage on the edge, sir you have skills.
Yes it can chop up barb wire like that you seen. It is so powerful
Great job ,I'll buy one send one to the usa😊
Thank for your liking it but I am sorry I don’t sell it I just want to make it
You peaple are amazing doing wat you can do with limited budget an resources great work
Yes really It is so work hard but he can do it very well
@lifeskillsdn sory to ask but what part of the world are from
Very Hard Works. Lot of thanks. Miah ❤❤❤
Most welcome 😊
Awesome knife-making techniques. But you need to clean your shop. DIRTY!
You are right
GREAT JOB
Thanks but work hard
Nice cleaver, very rustic looking. Imagine what this guy could do if he had a power hammer..👍
My thoughts exactly
Great job love your skills. Keep up the great work. 👍
Thank you! Cheers!
🇧🇷ótimo vídeo meu amigo um belíssimo trabalho parabéns
Yes thanks
No eye protection, no shoes, no problem.
Yes he always do that
Got. To hand. It. To. These. Guys. They. Don't. Sit. Back. Waiting. For. A. Giro. Just. Get. On and. Work. 😮!!!!
Yes
Good protective gear, camo crocs. They’ll protect your feet from white hot metal every time. Great ha ha!
You got that right!
Knife making nice. 👌👌
Yes it is powerful too
Excellent!
Thanks
Skillful gentleman 👍❤️🏆💪🏼🙏 job well done
Yes, thank you
Ok
Very good great craftsmanship and skill 👍🏻
Yes thank you so much
@@lifeskillsdn you are welcome keep up the great work
Impressive great video.
Yes thanks you so much
Only hands...👍👍👍
Yes really he makes by hand
Superb
Thanks 🤗
Forged in fire….. now present your blade!👍👍👍👍👍👍👍👍👍
Fire in fire it is so hard. Thank for your like it
Nice , good job
Thank you so much for your support
Yalls videos should get so many more views!!! Yall using hashtags? Maybe get a little more whacky with the thumb nails and titles. Maybe make an Excalibor or a Rambo knife or lord of the rings or Conan sword. Ur guys work is amazing and deserve way more attention!
Yes this work is so hard but he want to show all of you about how to make it. He try work hard every day. Thank you so for your good Idea
厲害👍👍👍
Yes thanks
Glad they were talking all the necessary safety precautions 😢
Yes really It is work hard. He tell us every time
Махать кувалдой прямо напротив кузнеца - этот так профессионально.
Yes he is a blacksmith in the country side but he can make many things that useful
If the head flew off the sledgehammer it good night blacksmith...
❤❤❤❤❤👍👍👍👍👍
Thanks
They. Use. Strikers. No power. Hammers. When. He says. Nod my. Head. Hit it. 😮😮!!
Yes really
i love Cambodia !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ❤ (i'm french blade maker but not a famous blacksmith! 😭😅)
Yes thanks you so much I believe that you became the smart blacksmith next time
Super 😊😊😊
Yes really it is so powerful
What else works , are used street sweeper front wear plates . They are good hard steel . When they are worn out , they get a perfect curved tapered edge , and you can cut a nice curved blade out of them with a zip- disc . You can get them cheap , because they just go for scrap metal .
bat pitchea troemotrauv he ei y now tinih pheak chre ei n de k del cheang yk tow phlit ubakar bre ei brasa chea dek e tch a y proh pel tinh vea tamleithaok proh cheangdek keat kr ei k
Tajikistan 😀👍👍
Thanks
👌
Thanks brother
I am sure they hear that sound in their sleep
Yes really
Estos cuchillos si valen lo que pesan por qué son únicos y están echos artesanalme y no producción en masa
I want to tell about its weight just tell about heavy
👍👍👍👍💪
Thanks
OK👍
Do you like it
How to temper the cutting edge of this chopper ? What chamical used for this
it is called edge quenching .edge is hard spine is relatively soft . bad heat treating and the edge would have chipped badly when he hit that barb wire
Yes reply him true but this cleaver is so powerful
Σε 300_ 350 χρονια ισως χαλαση εφ οσον χρησιμοποιείται από οικογένεια. Μπραβο μαστορα
Yes really
i want to order one and a bolo.
Sorry I don’t sell it
LO VOGLIO PURE IO ....
Why do you like it
I initially *almost* thought this was going to be a Professional job at the beginning. It cracks me up every time I see them do that "water dipping dance" that they think actually does something when tempering. Only to fully submerge it seconds later. God bless the person who came up with that and passed it on to others. It's always a good laugh.
It's a sound that makes the video come alive, but making a metal device is really difficult. Therefore, I think his work is hard work.
@@lifeskillsdn Agreed. He worked really hard on this. And even took the time to stone sharpen it properly. Unlike everyone else that just grinds it sharp with a power grinder. Which ruins the tempering, if there is any.
You're the expert, I'm guessin'? Why am I doubting your ass-ertions?
it is called edge quenching , if his heat treat was bad , his edge would have a huge chip in it . Once the steel is below 700 degrees farenhight the hardening is finished . Edge quenching leaves the edge glass hard and the spine soft . He did not get the edge to cherry , he took it to a dull red to keep it from being glass hard . . .If the man had no clue what he was doing he would not be in business . I am a welder by the way
yes really@@huckstirred7112
Heavy engineering……………….in flip-flops !!!!!!
Yes really but it is work hard
👍🇮🇩
Thanks
Who are the guys in the other forge?
He is a his brother’s blacksmith
Open toe sandals while banging red hot metal. what could go wrong?
What is it wrong ?
I was thinking that a small red hot metal can fall and get in between toes and cause a bad burn. also because it is not logical at all. @@lifeskillsdn
Can it chop meat though? 😂
It can cut nail
🍺👍💯🎯
Thanks
Where are you located at?
Cambodia
칼을 판매 하나요 가격은 얼마 합니까...???
Sorry I don’t sell it I just want to show about how to make it
Dear take loan and buy a 75kg power hammer that is very fast and easy your works
Ok God Bless 🙏🙏🙏🙏🙏🙏o
So big he can’t make it by antique’s way
Hardened but not tempered?
Yes thankfully
Where can i order one of these?
Sorry I don’t sell it
Bonjour
J aime beaucoup les couteaux que vous forgé et j aimerais savoir s'il sont à vendre ou vous les faites sur commande
J aimerais vous en acheter un ou deux couteaux s ils sont à vendre
Je vous remercie d avance Cordialement
Thanks so much for your liking it but I don’t sell it I just want to show about how to make it
Which country? Looks like in Thailand
Cambodia
@@lifeskillsdn thanks... They are muslims?
yes they are@@muhdshafizabdaziz5029
How and where 1: can i buy that knife any cp no.
Sorry I don’t sell it
Magkano po
Sorry I don’t sell it
He does not use Whetstone's of good quality.
It has the same quality when he use the neutral stone
How to order sir?
Sorry I don’t sell it
Awesome job for what he had to work with. I hope no one steps on any of that barbed wire that he sent flying all over the place! 😬
Thank for your goo idea. Then the end he clear it very well.
Что-то на кузнецов они не похожи ... 😢
He is a smart blacksmith in here
Where to get one? Pm me
Sorry I don’t sell it
how can i buy that
Sorry brother I don’t sell it. I just want to show about how to make it
Thats a nice handmade cleaver. 😁👍 🪓
Yes really it is so nice and so powerful
How to order ?
Can send it to Vientiane ?
Sorry I don’t sell it
How can i order a knife?
Sorry I don’t sell it
Nothing great at all...And OSHA safety reg. are just a dream?
Yes you think that but he try to make it so hard
Sure it aint America…
How to buy it
Sorry I don’t sell it I just want to show you about how to make it
Need more experienced not good it's not sharp enough
Yes but he can make good a lots
Como eu faço para comprar?
Nice blade, crappy handle !
Yes thanks you very much
Don't turn them loose in a real forge.
Why?
เยี่ยมมากขายเล่มละเท่าไร
Sorry I don’t sell it
Would like to have one of them very well done! Able to buy one of those?
Thanks for your liking and I am sorry I don’t sell it
@@lifeskillsdn hate to hear one isn't for sale but I understand. There's a lot of work and craftsmanship in something like that that will last forever!
👍👍👍👍🙏🙏
Thanks