It is a sweet little basher🤪 Yeah I love the look of a nice clean front flip and feels awesome getting a good one. Can't wait to see what it can do on 3s😆 Thanks for watching mate👊
Awesome! Do you know the length and width of the battery tray if i would want to use a 3s on it with stock esc? Thinking of buying it. Also did it ever cut out on 33´s. Guess it should if it did on 2s? :)@@rccrazy
@eric04110411 the 3s lipos I use are 65x30mm and about 23mm high and fit perfectly. Discontinued but most 850mah 3s fit. www.amazon.com/Zeee-Premium-Quadcopter-Helicopter-Airplane/dp/B08H5GD35D And it did not cut out on 3s
Dude these are sweet little rigs! They seem to jump/ land really well. Bet with a 45a (like you show in the video) that issue of it cutting off briefly
They are sweet little rigs and they do jump very nice. And yes with a decent 45-60a esc it won't do that cut-off thing, should be even better😁 Thanks mate👍
@@rccrazycan I use a 2838 4500kv motor in this model, and so is it will be faster? Now I'm so obsessed with these cars hahaha and this model is my first RC car ever.
@Sanchez-uh3uc it is a very capable car for the price, one of my favourite 1/16😁 I would not recommend going a smaller motor as a longer size is actually more capable and even though the stock motor is less kv's at 4000kv it is much more capable of achieving faster speeds. I would suggest trying the upgrade pinion gear(mod0.6 22t and must be 3.175mm bore) All you do is take out the motor and mount, remove the stock pinion then the mount from the motor and turn the mount around 180° as it is offset(made to fit a 22t pinion) Install the new pinion and that will give you a higher top speed with the stock system👌
I ended up buying one of these and they are lots of fun! Though on the second time i used it the crap cast motor mount snapped. Wish there was a plastic or aluminium part for it
Great vid, I’m waiting on mine to arrive and I’ve been looking for reviews for this… I’ve heard this is a clone of a couple of other Chinese models? Any luck finding a supplier for parts/ steering knuckles?
Thank you very much 👍 I actually just found a seller of basically every part, not great for myself not being a Aussie store but could be good for others. www.newnewtoys.com/150-suchi-yu-rc-model
Yeah small scale RCs are so much fun👌 The Enoze 1/18 are the same as the Kyamrc 1/18, keep a listen out for bad diff noise unless the brushless one have steel components, on mine the plastic diffs stripped on the first run on the brushed system😕
Guess what i done to mine, i added a ovonics 5200 mah 50 c high output battery pack, have notv tried it yet, had to take that tiny battery out, it fits on top of the frame brace, i used zip ties to hold it down😅😊😊
How much faster is it you think and can you add the links to the best electronic parts I already bought all the metal parts from Ali baba and new oil filed shocks idk what electronics to get tho
I cant remember the exact speed difference, I'd have to go through all my videos, but it's a significant jump up compared to stock. Basically any 28mm motor will fit so 2838, 2840 or 2845(4000kv MAX on 3s) You'll need a 45a or higher esc provided it fits under the shell. And you'll need a hobby grade controller and receiver, can not reuse the old controller.
Hey man i have the same one but my servo is giving me issues, it turns and everything just doesn't move the wheels, i think it lost its strength. Do you have recommended servos that might fit and be as powerful ?
If it sounds like it's spinning but not turning the steering mechanism them you probably stripped the gears out inside. I think the JX 1181MG servo fits but, I'm pretty sure that's what I use in mine now.
Hi just purchased one and when i turn controller and rc on the controller red light flashes and the lights on car flash but car doesn’t do anything not sure if needs binding if it does how do you do it with these
@@rccrazy I hope the guys who are dealing first hand with the manufacturers can address this, it is really should be standard to have oil shocks on any brushless truck, especially if it is a skate park basher champion.
Yeah as I said in the vid for brushed cars that do maybe 40-50kph MAXIMUM friction shocks are ok, some people even like them for the comedy style bouncing, but they add all the steel parts a brushless system and call it a pro but not add oil shocks🤔 It's a little odd.
Mate that is one sweet little truck. Those fronties were great landed on all fours 😃👍🏼. Great vid brother. 😎👊🏼
It is a sweet little basher🤪
Yeah I love the look of a nice clean front flip and feels awesome getting a good one.
Can't wait to see what it can do on 3s😆
Thanks for watching mate👊
Great bashing video and cool doggy
Thanks mate👍
She is a beautiful dog and loves the cars😁
Good video. Nice bash session
Thanks Tim🙂
Nice one mate so many people stop for a look it’s crazy haha
Yeah mate it's cool to see people enjoying the hobby even if it's just them watching us drive😊
Great running and jumping my friend
And I wish merry Christmas and happy New year my friend 🤩👏☃️🍷🎇🍸💃🌲🌟🧑🎄😊🍺❄️🍗🍻
THANK YOU RENE🥰
It is a great little RC for jumping👌
And you too! Hope you had a good Christmas and hope you have a happy 2023 🥳🎉
Great video as usual! So it can double backflip on 2s? :)
Thanks Eric👍
And yes doubles on 2s quad flips on 3s🤯😅
Awesome! Do you know the length and width of the battery tray if i would want to use a 3s on it with stock esc? Thinking of buying it. Also did it ever cut out on 33´s. Guess it should if it did on 2s? :)@@rccrazy
@eric04110411 the 3s lipos I use are 65x30mm and about 23mm high and fit perfectly.
Discontinued but most 850mah 3s fit.
www.amazon.com/Zeee-Premium-Quadcopter-Helicopter-Airplane/dp/B08H5GD35D
And it did not cut out on 3s
Looks like a great buggy for the price 😁
It really is man, 3s esc should be interesting😯😅
Dude these are sweet little rigs! They seem to jump/ land really well. Bet with a 45a (like you show in the video) that issue of it cutting off briefly
They are sweet little rigs and they do jump very nice.
And yes with a decent 45-60a esc it won't do that cut-off thing, should be even better😁
Thanks mate👍
@@rccrazy heheheh, think I fell asleep in the middle of leaving you that comment. Sorry bout that!😵💫🥴🥱😝
All good mate I knew what you were getting at😅
@@rccrazycan I use a 2838 4500kv motor in this model, and so is it will be faster?
Now I'm so obsessed with these cars hahaha and this model is my first RC car ever.
@Sanchez-uh3uc it is a very capable car for the price, one of my favourite 1/16😁
I would not recommend going a smaller motor as a longer size is actually more capable and even though the stock motor is less kv's at 4000kv it is much more capable of achieving faster speeds.
I would suggest trying the upgrade pinion gear(mod0.6 22t and must be 3.175mm bore)
All you do is take out the motor and mount, remove the stock pinion then the mount from the motor and turn the mount around 180° as it is offset(made to fit a 22t pinion)
Install the new pinion and that will give you a higher top speed with the stock system👌
I ended up buying one of these and they are lots of fun! Though on the second time i used it the crap cast motor mount snapped. Wish there was a plastic or aluminium part for it
Oh that's no good.
Yes I don't know why companies still use crapy metals for their products, as you said rather it be plastic.
really nice jumps !
Thank you very much!👍
@@rccrazy can you review the buggy version please?(scy 16201 pro)
I will be reviewing the buggy soon👍
@@rccrazy i subscribe
Very much appreciated!
Thank you😊
Great vid, I’m waiting on mine to arrive and I’ve been looking for reviews for this… I’ve heard this is a clone of a couple of other Chinese models? Any luck finding a supplier for parts/ steering knuckles?
Thank you very much 👍
I actually just found a seller of basically every part, not great for myself not being a Aussie store but could be good for others.
www.newnewtoys.com/150-suchi-yu-rc-model
These RC's are a lot of fun for the price, I am looking at an Enoze 1/18 scale truggy brushless in the near future.
Yeah small scale RCs are so much fun👌
The Enoze 1/18 are the same as the Kyamrc 1/18, keep a listen out for bad diff noise unless the brushless one have steel components, on mine the plastic diffs stripped on the first run on the brushed system😕
@@rccrazy I hope the Enoze has a metal drivetrain, plastic gears are simply not up to the challenge of a brushless motor.
Yeah about the only brands I'm ok with running the plastic gears with brushless is hbx or the newer eachine cars like the EC30.
@@rccrazy I will just not buy plastic gears again for my HBX if the gears strip out, it will then be a great time for the metal drivetrain upgrade.
Guess what i done to mine, i added a ovonics 5200 mah 50 c high output battery pack, have notv tried it yet, had to take that tiny battery out, it fits on top of the frame brace, i used zip ties to hold it down😅😊😊
How much faster is it you think and can you add the links to the best electronic parts I already bought all the metal parts from Ali baba and new oil filed shocks idk what electronics to get tho
I cant remember the exact speed difference, I'd have to go through all my videos, but it's a significant jump up compared to stock.
Basically any 28mm motor will fit so 2838, 2840 or 2845(4000kv MAX on 3s)
You'll need a 45a or higher esc provided it fits under the shell.
And you'll need a hobby grade controller and receiver, can not reuse the old controller.
Hey man i have the same one but my servo is giving me issues, it turns and everything just doesn't move the wheels, i think it lost its strength. Do you have recommended servos that might fit and be as powerful ?
If it sounds like it's spinning but not turning the steering mechanism them you probably stripped the gears out inside.
I think the JX 1181MG servo fits but, I'm pretty sure that's what I use in mine now.
Hi just purchased one and when i turn controller and rc on the controller red light flashes and the lights on car flash but car doesn’t do anything not sure if needs binding if it does how do you do it with these
Car on first then control, these car need to bind every time they are turned on.
Where the best place to get parts or upgrades parts for this model
I get them from Aliexpress.
They are easier found under the SCY name so if searching JJRC parts doesn't work try SCY parts👌
Cool thanks mate
It is annoying that this does not have oil shocks out of the box.
Very annoying mate😖
Always a good idea to have some random parts on hand like oil shocks, bearings and DEFINITELY pinion gears!
@@rccrazy Yup, a lot of my stuff sitting in post office storage at the airport because it is the holidays.
@@rccrazy I hope the guys who are dealing first hand with the manufacturers can address this, it is really should be standard to have oil shocks on any brushless truck, especially if it is a skate park basher champion.
Tell me about it, waiting on holiday packages 😭😅
Yeah as I said in the vid for brushed cars that do maybe 40-50kph MAXIMUM friction shocks are ok, some people even like them for the comedy style bouncing, but they add all the steel parts a brushless system and call it a pro but not add oil shocks🤔
It's a little odd.