🔖 Animation of Vise || Using Creo Mechanism

This PTC Creo 3.0 tutorial will show how to animate the assembly of ‘Vise’ by using the ‘Mechanism’ application of the software. This application is used to move and analyze the motion of a Mechanism.
The Assembly of ‘Vise’ model has three sub-assemblies. To know how to create the subassemblies and it’s components watch a previous tutorial by me by visiting the following link…
• Vise (PTC Creo Assembl...
First, we will place the subassembly 1 in the main assembly and assemble it at the default location. Next subassembly 3 will be placed and a pre-defined constraint set ‘Cylinder’ will be applied which provides two-axis joint, Translation and Rotation. Finally, subassembly 2 will be put in the assembly and some component references will be applied. Later we will add two Servo Motors over both axes of ‘Cylinder’ constraint set to run the whole mechanism.
The Pitch used in creating the threads over the components of Vise model is 0.125 (1/8) inch. That is why one servo motor will run at a velocity of 360°/second that will provide rotating motion and second servo motor will run at a velocity of 0.125 inches/second which will provide translation motion. When we run the Dynamic Analysis for 8 seconds the jaws of vise will open the gap between them will be 1 inch.
By watching this tutorial viewers will observe as well as learn the following tools/commands of the software:--
1. Placing components in the assembly.
2. Applying component references to fully constrained components
3. Using pre-defined constraint set which are used for creating mechanism.
4. Using Creo Mechanism Application.
5. Inserting Servo Motor.
6. Dynamic Analysis of Mechanism.
7. Using Playback command which is used to replay the previously run analysis.
....................................................................................
Note:--
………………..
To understand the video easily, focus over places where we have paused our mouse. This is done so as the viewers can easily read the tooltips generated by the software and understand what is being done and why.
...................................................
Visit the following link to get files to complete the tutorial and the finished file …nisheeth-invent...
....................................................................................
Visit the following link to watch the basic tutorials on Creo Parametric by me
• PTC Pro-E/Creo Paramet...
.........................................................................
To watch detailed tutorials on the same software visit the following link:--
• Pro E Wildfire / Creo ...
..........................................................................................
Hope all of you will enjoy the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads.
www.youtube.com...
....................................................................................................
Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as a reward to our patrons…
/ nisheethsri

[@rajeshchandra75]

Thank you very much! That video helped me a lot for my work.

[@Sharath429]

This video tutorial is awesome....

[@linclonline1]

Thank you very much! That video helped me a lot for my work. Great job with this tutorial!

[@3DSolidModellingVideosCreo]

You are welcome.

[@sathishs1204]

is it possible to make animation of 2D drawing in creo

[@Sharath429]

I have some doughts how can I get u...

[@3DSolidModellingVideosCreo]

If you have any question please mention the specific video time and ask. I will try to answer.

[@Sharath429]

@@3DSolidModellingVideosCreo In this video After Assembling the Sub-Assembly_2 when u run the mechanism preview assy-2 will move along with the assy-3 right. But in my case is same concept, I have 1 shaft with 1 bar i am try to do the same kind of movement. In my assy Shaft is rotating but bar attached to the shaft was not moving. Can u help me...

[@3DSolidModellingVideosCreo]

Oh, it is a personal project related question. For this, you should take help from the official Creo forum. I do the same for my problems. ⤵⤵
community.ptc.com/t5/Training-Discussions/Copied-Group-operation/td-p/477748
There are very senior software users who give the reply to such problems. Give it a try.😄😄
The link of the forum is mentioned in my channel about page ⤵
ruclips.net/user/nisheethsrivastava1about