Improvise, adapt, overcome nice job mate! I live in the states so maybe I get a little spoiled. I'm about to go 124ci really stoked about it. Dig your vlogs....
Thanks brother, man it's a pity for my sake that all the sweet aftermarket harley parts are made in the states. The conversion rate to Au and the cost of shipping is a killer. You should do a couple of vids when you go the 124ci, that thing will rip 🔥🔥🔥🤙
love all your videos TGM. informative without being patronizing. could you please paint the tab at the rear of the seat, the silver against the black fairing hurts my eyes 🤣. I did similar with a seat, just used 'plasti-dip'. still on there for 8years plus.(don't intend to insult you)
It shouldn't be any harder to depress, if anything it should be lighter. The clutch on this bike is a cable clutch and not a hydraulic one and is still very easy to pull in.with 2 fingers.
Just off eBay mate, I'm sure you could find one cheaper somewhere. www.ebay.com.au/i/202712912812?chn=ps&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&itemid=202712912812&targetid=920064925573&device=m&mktype=pla&googleloc=9047628&poi=&campaignid=10101785249&mkgroupid=102311926540&rlsatarget=aud-786643580846:pla-920064925573&abcId=9300368&merchantid=7364522&gclid=CjwKCAjwh7H7BRBBEiwAPXjadk9vTmqGYEYhW84wOU824f0qlxIYsIc1mIIw7G3P8g4eyWjMcwSdnhoCoQMQAvD_BwE
@@TheGingybeardMan oh ok it wasn't showen in the video thats why. did u do then yourself? if so do you have a video or just a tip on how? im trying to do mine on the 2019 fat bob.
@@peckharris3180thanks mate, yeah the drought is pretty rough, it was a very ordinary harvest for the farmers out this way. It's a bloody dust bowl out here and we're on level 1 water restrictoons. Fortunately there hasnt been any bushfires out my way 🙏
I finally got my Lucky Dave 13s. 13in. Handlebars. I put them on myself and only had to extend one wire set. I believe it was the switch housing on Right side. Clutch and Brake Cables are fine plenty of slack. Relocated turn signals to fork. I had Stage Two Low Toque Cam Installed. Bike is a Beast Runs Like A Scalled Dog. Ride Safe 👍👍🙏🙏
@@peckharris3180 good stuff man, those lucky 13s look sweet 🤙🤙🤙I plan on getting the stage 11 torque cam very soon. How do you find the increase in performance?
The levers look a hell alot nicer mate good work. I noticed the steel tag that holds the seat while u changed the lock bolt, will you be blacking the tag out to match the fender and bolt? Nice one keep it up
They're perfect man, wish I did it sooner hey. I use 3 fingers when using my clutch and brake lever and my pinkie finger remains on the grips. I noticed with the stock levers when I pulled them in the clutch lever would hit my pinkie finger which was uncomfy. Now with the shorty levers I dnt have that problem. Such a simple mod but I'm a big fan hey
Great job, never thought about short levers for HD's
Nice work!! I’ll have to find a powder coat shop around here
Beautiful work on those levers!! Look great on your Street Bob and custom fit. Excellent!!
Great video on DIY shorty levers Ginger 🇦🇺👍
Cheers man 🤙🤙🤙
Great vid buddy. Those shorty leavers look awesome
They look great brother! Well done 👍🏼
Thanks mate, was able to save quite a bit by not buying shorty levers 👍
Improvise, adapt, overcome nice job mate! I live in the states so maybe I get a little spoiled. I'm about to go 124ci really stoked about it. Dig your vlogs....
Thanks brother, man it's a pity for my sake that all the sweet aftermarket harley parts are made in the states. The conversion rate to Au and the cost of shipping is a killer.
You should do a couple of vids when you go the 124ci, that thing will rip 🔥🔥🔥🤙
Looks great mate😍, good DIY vid easy to follow 👍👍🤙🤙🇳🇿🇳🇿
Thanks Nathan, it's a simple mod but I think it looks the goods 🤙
Nice job bro they look really good on it
love all your videos TGM. informative without being patronizing. could you please paint the tab at the rear of the seat, the silver against the black fairing hurts my eyes 🤣. I did similar with a seat, just used 'plasti-dip'. still on there for 8years plus.(don't intend to insult you)
Great vid mate. I've done the diy shortys on my bike, came up a treat.
Thanks man, It's a great little mod and certainly simple enough 🤙
Good job mate! Might do that myself!
Looks good!!!
Well done...looks great!!
Thanks mate 🤙
Nicely done broski 👍🏼🇺🇸
Cheers man 🤙🤙🤙
2 thumbs up bro. Nice 👍👍
Maybe put a bit of black paint on the seat "thingy" were you changed the bolt.
Thanks brother, Definantly will be doing that in the future. I dnt know why they have a silver mounting tab, it sticks out like a sore thumb.
Can i do this to a sporster as well? Or the clutch and brake are harder to press?
It shouldn't be any harder to depress, if anything it should be lighter. The clutch on this bike is a cable clutch and not a hydraulic one and is still very easy to pull in.with 2 fingers.
Where’d you get the Allen bolt with the collar?
Just off eBay mate, I'm sure you could find one cheaper somewhere. www.ebay.com.au/i/202712912812?chn=ps&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&itemid=202712912812&targetid=920064925573&device=m&mktype=pla&googleloc=9047628&poi=&campaignid=10101785249&mkgroupid=102311926540&rlsatarget=aud-786643580846:pla-920064925573&abcId=9300368&merchantid=7364522&gclid=CjwKCAjwh7H7BRBBEiwAPXjadk9vTmqGYEYhW84wOU824f0qlxIYsIc1mIIw7G3P8g4eyWjMcwSdnhoCoQMQAvD_BwE
Nice! I think im gonna do this on my yamaha bolt
great video.. how are they holding up so far? does the paint tend to peal off or fade after so much use?
I got them powdercoated so they're very durable. I've had no signs of any wear so far 👍
@@TheGingybeardMan oh ok it wasn't showen in the video thats why. did u do then yourself? if so do you have a video or just a tip on how? im trying to do mine on the 2019 fat bob.
Just wondering , what are the advantages of having the shorty's compared to the regulars ?
Mate its mostly just for looks however some people find them more comfortable for use with 2 or 3 fingers
The Gingybeard Man Just wondering 🤷♂️
How are you Making out with The Fires and Drought.
Ride Safe 🙏🙏
@@peckharris3180thanks mate, yeah the drought is pretty rough, it was a very ordinary harvest for the farmers out this way. It's a bloody dust bowl out here and we're on level 1 water restrictoons. Fortunately there hasnt been any bushfires out my way 🙏
I finally got my Lucky Dave 13s. 13in. Handlebars.
I put them on myself and only had to extend one wire set.
I believe it was the switch housing on Right side. Clutch and Brake Cables are fine plenty of slack.
Relocated turn signals to fork.
I had Stage Two Low Toque Cam Installed. Bike is a Beast Runs Like A Scalled Dog.
Ride Safe 👍👍🙏🙏
@@peckharris3180 good stuff man, those lucky 13s look sweet 🤙🤙🤙I plan on getting the stage 11 torque cam very soon. How do you find the increase in performance?
Really great!
Thanks brother 🤙
Good job!! 👌🏼👌🏼👌🏼
The levers look a hell alot nicer mate good work. I noticed the steel tag that holds the seat while u changed the lock bolt, will you be blacking the tag out to match the fender and bolt?
Nice one keep it up
Thanks brother, yep you're on the money, I do plan on blacking that little tab out on the seat.
Great video and craftsmanship! How are you liking the feel of them on a ride?
I really like them hey, for some reason they feel more comfortable.
Nice DIY. They look good how you find them for use?
They're great Kris, so much more comfortable. I dnt squish my small finger when pulling in the clutch now cause I use 3 fingers.
They look good man,and a lot cheaper,thats for sure
Thanks mate 👍
Hey man
Those look great I was going to do this
But what’s ur thoughts on them ?
U like the feel ?
They're perfect man, wish I did it sooner hey. I use 3 fingers when using my clutch and brake lever and my pinkie finger remains on the grips. I noticed with the stock levers when I pulled them in the clutch lever would hit my pinkie finger which was uncomfy. Now with the shorty levers I dnt have that problem. Such a simple mod but I'm a big fan hey
The Gingybeard Man
I’m definitely
Doing this in the next couple of weeks when I get my new grips
Your videos are on point !
@@ceec6923 thanks man 🤙🤙
U-Da-Man
Canny mod 🇬🇧✌🏻🍺
Thanks mate 👍🍻
That's not a good idea, there is a reason those ball ends are on there.
Beware if in the UK this is an MOT Failure.