Это видео недоступно.
Сожалеем об этом.
Extremely Easy to Build- DRILL CHARGING STATION (Shop Organization)
HTML-код
- Опубликовано: 15 июл 2018
- Learn to make a simple drill charging station out of scrap materials laying around the shop. This is the perfect project to get into woodworking. Shop organization is key to pumping out quality projects, check the tools and material list below!
Amazon (AFFILIATE LINKS HELP THE CHANNEL!):
KREG JIG: amzn.to/2Nly9Yl
ROUTER: amzn.to/2urij79
DRILL: amzn.to/2NhLgcT
DEWALT MITER SAW: amzn.to/2Nl0IEZ
FESTOOL SANDER: amzn.to/2Nj30Vk
DRILL BITS: amzn.to/2JqoH3f
BRANDING IRON:
www.gearhearti...
/ melrosedesignco
melrosedesigncompany@gmail.com
melrosedesigncompany.com
Music:
Song By: Jeff Kaale
Song: For Love
Check him out on Instagram = / jeffkaale
Disclaimer:
I, or Melrose Design Company, are not responsible for any injury or loss of property due to improper tool safety. This is a video for entertainment purposes ONLY. If you wish to attempt anything you've seen on this video or others on this channel, you do so at your own risk.
Thanks for watching!
You had me at "for organizing my one and only drill." Lol. Awesome build brother!
Finally. A step by step, easy to understand approach to building this project. Thank you.
Thanks for the comment! I try to make it as easy as possible!
Very nice.
Like your humor Zac!
“I really need to build a miter station”
“...storage for my one and only drill”
Turned out awesome buddy! The chamfer looks great and the brand really topped it off!
Joe
Thanks Joe! I need to work on my delivery, my friends always tell me I sound like a robot when I give these narrations haha. Oh and congrats, you're almost at 200,000 Subs! That's a hell of an accomplishment! Pretty soon RUclips will be making you a gold plaque ;)
"One and only drill" had me rolling!! Great vid!
Idk why but I find the way you did this super easy..
I been watching all kinds of really nice videos of how to build this similar project and now finally with your video I’ll get down to it ... thanks 🙏🏻 GOD BLESS.
For even spacing, use an expanding sewing guage. It will give you even spacing every time.
Power tools and flip flops...EPIC!
That's the only way to do it! I've upped my safety game since this video, I now wear closed to sandals
I’m going to copy your plans here for my power tool storage. I also have a GSP as my shop buddy, best dogs ever!
Gsp are the best that’s awesome! If you have a growing shop I’d suggest making one bigger than this, I’ve already outgrown mine a year later 😅
Thank you for the drill station video but thanks even more for one comment you made. I am new to wood working. When you made the of suggestion to set the power to between 7-9 to prevent over torquing the screw and splitting the plywood. I also appreciate label the front. You have an excellent presentation.
“My one and only drill” said no man ever! Let’s add to that!!
Ive added to it since haha thanks for watching!
@@ZacJones thanks man I got my dewalt dream set. Coming from a HF buyer they are amazing. I want to build a nice area for them
my dad has festool sanders and vac, sanding is so fun now
This my next project for sure but now to find someone add on to these to hold my circular saw and reciprocating saw. If you know of a video please let me know because I'm always looking to learn more and build more. Love your video and thank you for not trying to make it look more difficult than it really is.
I advise you get a decimals to fractions chart. I'm not ashamed to admit I still use one. I worked in a wood shop for a while, and the old military guy that trained me in, had a chart up on the work bench. Lol he had a way of getting under your skin... And teaching you something while he was at it. That decimals knowledge is an awesome artillery in the wood shop. It would give you pinpoint accuracy in fractions so you don't need to convert to metric unless you chose to do so.
Love the music. Some folks don’t have rhythm. Lol Your presentation was great.. Thanks..
Awesome start
Hey Zack,
Made the mistake of watching that red hot Building. Sorry I did that. Your idea beats them 100%. Thanks will try it for my 4 Cordless drills. Just busting. Great Job band the delivery was. Fine.
I love this! I only have ONE drill also but I want one of these, thank you!
Great video! But you win the "Most Annoying Music Ever" award.
Nice! I like how you chamfer the sides!
Thank you! I thought it added a nice touch, thanks for watching!
nice, simple design.i've been looking for one like this, i will build this today, but i'll be using rough cut lumber, i have no plywood. thanks for sharing!
Great video, i will add this to my list of projects i am not going to do lol.
Sounds great! Good luck with it, it’s a lot of fun to build!
Such a sweet set up! This is a great way to store that one and only drill😁.
haha you caught on to that! Hopefully one day my drill will get a few friends, maybe if this whole RUclips thing takes off lol
We're sure it will, we love your stuff.
It's not a single drill holder, it's a a future drill holder.
Nice build :)
Great build!!
Take total width divide by number of spaces required (not partitions. Ie: yours was be 4 spaces not 3 drill partitions) then centre ply over each mark.
So, say theoretical 360mm width.
Divide by 4 spaces (to create 3 drill partitions) equals 90mm.
Centre 16mm ply at 8mm and screw at 90, 180, 270mm marks.
And you will have three partitions equally spaced across your theoretically 360mm wide total width.
Hopefully that helps? Just forget the thickness of the partition ply and always centre them.
Good luck with your new channel.
That is a great tip right there, I'll just figure center next time I want some even dividers! Thanks for watching and I'm super pumped to get this channel rock in rolling!
Can you post the measurements of the pieces
Easy and nice work thanx for sharing
Random Things thank you for watching glad you enjoyed it!
Very nice!
Hi do you have a cut list for this project?
Smashed the like button for the GSH. Nice build.
Thanks Shawn! Tucker appreciates that!
NICE JOB
Nice job! I think you've left just the right amount of room to grow into.
I think you're right Bruce! Thanks for the support man I really appreciate it
Where can I get the plans and measurements for this please?
Can you try to do a circular saw holder
Can you give me the measurements?
Great build, getting ready to embark on of these for my shop. Love the Va Beach area, I visit the area often for work. Enjoyed!
Thanks a bunch Eric! I love the VA beach area too, what do you do for work? Thanks for watching
Can you add the measurements you used when making this. This is awesome!!!
Stay tuned Alejandro, working on plans for this build and my others.
@@ZacJones Hi, did you publish this somewhere? I can't find it in the video description! Thanks :)
Great plan and video. Thanks for the inspiration. Background music very annoying.
Thanks for inspiring me. I may do a video project inspired by this in the near future.
StuffUCanMake id love to see that video! Thanks for watching, I’m about to check out some of your work!
Great video and funny. To center the drill hangers use a center finding ruler. Check Amazon a 12 inch one is like $13.
Nice.
Thank you!
The music drive me batshit insane
Nice video.
Thanks for watching Larry!
I really like that design! Nice build and well done! :-)
Hey thanks man! I filmed one a while back and i was not happy with it, scrapped it and made 2.0 here!
Hey zach whats the spacing for the drill cabby? How big is the bottom knotch and how big is each square? Thanks
I belive it was roughly 5" or so? I kind of spaced them out based on my drill set which will be different for everyone. Hope that helps
Would be wrong not to use pocket holes? I kind of like the way the screws look on the boards. Or it only matters on the constructor’s preference?
Do you have plans for this build ?
Nice👌and also the pool in your garden haha
Oh man when that pool is clean and its hot like it is now you better believe Tucker and I are jumping in!
I would put a power strip screwed on back of top shelf then you will only have one power cord going through hole on side. Will be a cleaner look.
That's a great call! I'm pretty sure I have a few power cords laying around too!
Do you have the measurements for this station? I'm kinda new to stuff like this and really lack experience, so I get nervous when it comes to measuring stuff out for projects.
Zac, very handy! I've gotta make something like this myself! As for equally spacing, try using a few scraps of wood that are the same width (ripped easily on the tablesaw) for the 3 center spacers and then eyeball between both ends till it looks centered. Does this make sense?
That's just an answer to your question...at least that's how I do it. Yours turned out beautifully and I wouldn't worry at all about it. I wouldn't have known had you said something!
Great project, thanks for sharing!
Thats a good tip right there Rob! You should totally make one and film it! You're pretty good at the whole filming and editing thing ;)
Very helpful video. And man, you sound just like Joe Flacco
Dang David I must have missed you comment! Thanks for watching and the comment about Joe Flacco. Not going to lie I went back to listen to one of his press conferences and I must admit I sound pretty similar haha
That was really funny at the end. Haha nice video!
Thanks for watching Corey! I try to insert humor where I can.
Great looking station... give me the idea to make one too. Thanks for sharing
You should totally make one and film it, you do great work over on your channel!
Melrose Design Company thanks for the compliment😁👍
If the dog approves, I like it
Eddie Espinosa thanks Eddie! I think Tucker does approve of it, though he doesn’t have any thumbs to grasp on to the drill so that may Be my next DIY project!
What size Kreg screws did you use?
looks good. Did you install the top shelf and have to take it back off because you needed to be able to get to the tool hangers attached to the bottom shelf? I would suggest a round over bit for the hole you drilled for the charger cord.
So I preassembled the bottom hangers in before I put it together. I’d be lying if I said I didn’t put the top shelf on first though 😂
Genuinely thought that the background music was painful to listen to.
Cleanest/Simplest design I've seen for one of these. Love the tunes too. Thanks for sharing!
You are the first to say you love the tunes so thank you for that! and I'm glad the design is super simple, that's what I was trying to go for!
@@ZacJones Btw do you know the width end to end on yours?
love that music like the build to keep up the good vids
I'm glad you like the music, so many people hate it lol. I like mixing things up a bit! Thanks for watching Ricky
Spacer blocks would be the easy way to get the pieces evenly spaced. Cool project. Nice job.
Music was a little annoying but tolerable
Hello, I live over in Clarksville, Viginia -- we are on HWY58 about 1/2 way from VA Beach to the mountains. Sure enjoyed your video. I just built a new rather small work shop this past summer and looking for ideas for tool storage and organizing my shop... Thanks for the help here.. Ohh, in all due respect the music was just a tad annoying (funny waving sounds tore at my nerves a little. I guess I'm used the the 70s sound !! All the best, -- Jack
Thanks Jack! Glad you enjoyed the video minus the music haha I’ve done better in recent videos using less annoying music haha. You’ll have t send me some pics of your shop when it’s all set up!
To evenly space divide by the number of spaces
Thanks for the tip! I always do that but somehow still mess up every time!
I always use a round-over bit in my router but you have me thinking now, nice project 👍
I always do the same thing and really wanted to try switching it up myself! I was pretty happy with the way it came out. Thanks for watching!
Nice build. Just a suggestion, but I would ditch the music on the next one.
Thanks Brian! I agree with that statement 😅 not clue what I was thinking back then
The video is great!!! The music really sucks.
What are the sizes of dividers and the bottom pieces?
It was approximatly 27" in length and depth was about 7". I took the inside dimension which was 25.5" and divided it out by three to get some symmetrical pockets for the drills. If I could go back I'd make this twice as long. Hope that helps
VA represent! Great project. Going to follow your design.
brandon yanez heck ya! Let me know how it turns out!
Oh ya, how does a guy with one drill have his own branding iron? Can you say cart before the horse !
It doesn’t take much to make a brand these days
Was that music necessary for the video
jcmarth1 not at all... I find it pretty annoying now, not going with music in the future. Thanks for barring through that😂
Lol I actually liked it
@@mikejrog I like the music. You do you.
@@lambdaguy77 You're replying to the wrong person.
I liked it man. Make it your own!
how much is the cost
Gus Rivas hey Gus, I charge $100 for this particular one and $10 for each additional slot
Lose the background 🎵 did I had to turn off the sound and read the captions!
change de backg
round music...please
Great video, but could do without the music. Very annoying.
Jeff Endicott thanks for watching, I agree the music choice was pretty bad 😂
The music makes me not want to watch the video
My apologies, Ronnie. On newer videos im bringing the volume of the music down and making it less annoying. Thanks for baring through that
Get rid of the music homey
I've since gotten rid of the music on my future videos. Looking back it was very distracting! Thanks for watching
One drill one charger? That is a shelf not a station !
Drill charging shelf, I like the sound of that 😂
Nice! Handsome p0inter by the way!
Thanks for watching! And thank you! I'm pretty obsessed with him
interesting project but gawd awful background music
Alan McWilliams the music was one of my concerns with making the video haha thank you for watching
ok video but the music is absolutely the worst.
So handsome. So much easier to learn when an intelligent sexy man explains things to you.
The background music in this video is HORRIBLE. Why put it in, it is obnoxious.
Sorry Jeff, I won’t let it happen agan
Nice.
Thanks for watching!