To je tak, keď má človek nastrelenú optiku na 45m a strieľa na 10m :D a v zápale hry nekompenzuje ... ale aby sa nepovedalo tak ma ten kríčok z pneumatiky ochraňoval na druhej strane. Ying a Yang.
What kind of ICS ? Newer Models (I think 2017+ ) with ebb uses nozzle #2. Which nozzle and gun model do you have ? Feeding issue can be connected to nozzle alignment and nozzle length. Smaller metering screw can help, but my ICS with nozzle #2 works fine on stock metering screw.
@@tatkoairsoft2146 I have the a CXP MARS SBR. I also installed the #2 nozzle. Alignment is in the middle (perfectly almost). I think the 0.024 metering screw is in it.
@@Bryan-zm4sy that is a good start. Try to see if you can move the engine a bit "back" in the GB (if it is fully forward). I have about 1mm play in the upper, so having the engine as far "back" as possible while maintaining perfect seal can aid in better feeding (if the nozzle sticks out less, less chance of problems). Also what bucking do you use ?
@@tatkoairsoft2146 I use these specific rings and a bit of tape to secure the engine in the upper GB. Otherwise the engine moves horizontally when shooting. I use a G&G green bucking, I've tried multiple buckings who all JAM because of the longer bucking lips.
@@Bryan-zm4sy I got GG green too. I do jot have those slot rings. I have used small oring on the front a one oring in the back. As I have said try to play with the correct position. I do not think the problem would be in the bucking as those are spotless from my experience. If you alignment is spot on I think the issue would be in the nozzle beeing tad bit too long (so moving engine e back a bit can reduce that)
Pekné video👍 si spokojný s Vector optics?ktorý model to máš prosím Ťa? btw granát apocalyps? je dobrý? diky za prípadnú odpoveď a len tak ďalej, videá sú super 😉
Značka super. Mam model Forrester gen2 LPVO 1-5x ... ideál na ihriská kde sa hrá aj CQB aj OSB. Da sa s nim aj CQBcko hrať v pohode (na 1 tke prakticky red dot), ale váhovo je red dot lepší. Gránat mám ASG Apocalypse. Fičí bez problémov už cez jeden rok (Iba som 1x menim napustaci ventil, lebo sa zlomil a netesnil, pasuje WE, zalezitost par korun)
@@tatkoairsoft2146 diky za odpoveď. Je ten forester dosť svetlý? Dá sa aj v lese a budove použiť? 1x zväčšenie je verné či trošku zväčšuje? Lebo mám od novritscha lpvo a je to fajn len chcem aj niečo o kúsok lepšie skúsiť ale na "ostré" lpvo za 400+ sa moc necítim🙃 zvážim ten granát, vždy mi to chýba... stači 1 či radšej 2?
@@airsoftfantom 1 stačí isto. Forrester ma krasny obraz. Mal som moznost porovnat s novritchovkou a je lepsi . 1x je tak na 98% Verne red dotu, záleží ako ma človek nastavenu Diop. Kompenzaciu. Stoji to za tie $$$. Postnem keď tak zajtra short o tej optike :)
@@airsoftfantom ruclips.net/user/shortsliyQ_eoV8Y4 nech sa paci, Forrester :) ... kamera podla mna nevie verne zreprodukovat cistotu a jas optiky, ale je aspon pekne vidiet ze cca od 3 m na 1x nie je ziadna deformacia obrazu.
Nice video 👍
8:25 Tá pneu s tebou dobre vydrbkala :D
To je tak, keď má človek nastrelenú optiku na 45m a strieľa na 10m :D a v zápale hry nekompenzuje ... ale aby sa nepovedalo tak ma ten kríčok z pneumatiky ochraňoval na druhej strane. Ying a Yang.
8:20 nepochopim preco si sa strielal z vlastnym :D
3x za sebou po mne strielal a nereagoval na vyzvu "farba" .... potom keď sme kecali tak "dezertoval" od nás :D ... asi další element hry v Rážnanoch.
I have a kythera as well. But I have feeding issues with my ICS standard hopup. Do you have any advice?
What kind of ICS ? Newer Models (I think 2017+ ) with ebb uses nozzle #2. Which nozzle and gun model do you have ? Feeding issue can be connected to nozzle alignment and nozzle length. Smaller metering screw can help, but my ICS with nozzle #2 works fine on stock metering screw.
@@tatkoairsoft2146 I have the a CXP MARS SBR. I also installed the #2 nozzle. Alignment is in the middle (perfectly almost). I think the 0.024 metering screw is in it.
@@Bryan-zm4sy that is a good start. Try to see if you can move the engine a bit "back" in the GB (if it is fully forward). I have about 1mm play in the upper, so having the engine as far "back" as possible while maintaining perfect seal can aid in better feeding (if the nozzle sticks out less, less chance of problems). Also what bucking do you use ?
@@tatkoairsoft2146 I use these specific rings and a bit of tape to secure the engine in the upper GB. Otherwise the engine moves horizontally when shooting. I use a G&G green bucking, I've tried multiple buckings who all JAM because of the longer bucking lips.
@@Bryan-zm4sy I got GG green too. I do jot have those slot rings. I have used small oring on the front a one oring in the back. As I have said try to play with the correct position. I do not think the problem would be in the bucking as those are spotless from my experience. If you alignment is spot on I think the issue would be in the nozzle beeing tad bit too long (so moving engine e back a bit can reduce that)
Pekné video👍 si spokojný s Vector optics?ktorý model to máš prosím Ťa? btw granát apocalyps? je dobrý? diky za prípadnú odpoveď a len tak ďalej, videá sú super 😉
Značka super. Mam model Forrester gen2 LPVO 1-5x ... ideál na ihriská kde sa hrá aj CQB aj OSB. Da sa s nim aj CQBcko hrať v pohode (na 1 tke prakticky red dot), ale váhovo je red dot lepší. Gránat mám ASG Apocalypse. Fičí bez problémov už cez jeden rok (Iba som 1x menim napustaci ventil, lebo sa zlomil a netesnil, pasuje WE, zalezitost par korun)
@@tatkoairsoft2146 diky za odpoveď. Je ten forester dosť svetlý? Dá sa aj v lese a budove použiť? 1x zväčšenie je verné či trošku zväčšuje? Lebo mám od novritscha lpvo a je to fajn len chcem aj niečo o kúsok lepšie skúsiť ale na "ostré" lpvo za 400+ sa moc necítim🙃 zvážim ten granát, vždy mi to chýba... stači 1 či radšej 2?
@@airsoftfantom 1 stačí isto. Forrester ma krasny obraz. Mal som moznost porovnat s novritchovkou a je lepsi . 1x je tak na 98% Verne red dotu, záleží ako ma človek nastavenu Diop. Kompenzaciu. Stoji to za tie $$$. Postnem keď tak zajtra short o tej optike :)
@@tatkoairsoft2146 Vďaka ešte raz za odpoveď, vyskúšam ho👍
@@airsoftfantom ruclips.net/user/shortsliyQ_eoV8Y4 nech sa paci, Forrester :) ... kamera podla mna nevie verne zreprodukovat cistotu a jas optiky, ale je aspon pekne vidiet ze cca od 3 m na 1x nie je ziadna deformacia obrazu.
Kde to je?
Pri Obci Ražnany ( Pri Sabinove )