Superb. A man of few words😉😊 An issue I have with adding in such small parts is that they don’t stay. The CA sticks to the tweezer or the part sticks to the tweezer and not where I am trying to put it. Then I have to manhandle the small part in place, flow in CA glue, usually too much, and hit it with kicker. Messy and usually residue. Your placements look much more precise🤔
So I have looked everywhere for those Dumont tweezers... can you tell me where you purchased those? I have also discovered that there are several type of ss140 tweezers... which one specifically?
This is great idea! I love the fact you are not only showing tools but also examples what you are using them for. Thank you for sharing your experience!
I like the green ones with the fine point steel tips...when you bust those tweezers out it's usually to open doors, trunks, hoods on finished models. The fruits of your efforts finally revealed.
Excellente idée de montrer les outils que vous utilisez. L'outillage de bonne qualité est important, mais ce n'est pas l'outil qui fait un bon ouvrier ! La dextérité et la précision de vos gestes sont pour beaucoup dans la qualité de votre travail ! J'espère que vous nous ferez d'autres vidéos de ce genre. Dans vos vidéos, on ne voit que le bout des outils que vous utilisez. Ce genre de vidéo permet de mieux comprendre la manière d'appréhender le travail. Merci pour cette présentation d'outillage.
@@A4Garage bien sûr, toutes les idées sont bonnes à prendre. De voir avec quels outils vous travaillez, c'est intéressant. Et j'ai l'impression que je ne suis pas le seul en regardant les commentaires. A bientôt et prenez soin de vous.
Where do you purchase all your metal pieces that you use on your models ie the very thin aluminium , along with the rivets and extra part from? Kind regards Barry P.S. love your work!
Thanks for this I’m sure I’ll not be the only one who had been wondering about the different types of tweezers you use. I almost couldn’t wait for it to finish so I could check them out on internet 😝 I take it there’ll be more if this is 01 👍
Gracias por entrar tu mundo, igual de mi parte siempre puse atención a tus herramientas, es mas parece Disney tu oficinal de trabajo seguramente, por todo lo que tenes... lo que mostraste el día de la fecha me encanta así se como te mover y que utilizas igual ya se te extrañaba en no publicar videos. ya no aguanto mas a ver cual es tu próximo proyecto.
Thank you for starting to detail the tools you use, done in the same excellent way you produce the car build videos. As someone with a pair of eyes well into their eighth decade, I can't help but wonder if you use some sort of magnifying visor (or other optical help) for this level of work? If so, which one? Stunning models, btw.
Thanks for the response - much appreciated. I wondered if that was what you were using because it seems to attract good reviews. Difficult to source in the UK ... certainly at a sensible price ...
Buenas tardes, en el segundo 37 de este vídeo, el motor sobre el que está haciendo la demostración a que coche pertenece? - Good afternoon, in the 37th second of this video, the engine on which you are doing the demonstration belongs to which car? Increíble los trabajos que hace Incredible work he does
I have become addicted to your videos, they are an amazing inspiration. Your craftmanship is unmatched by anything I have seen. I have dreams abnout tweezers now. I am curious about that white block, is that a nylon block and doesv it have useful qualities for the building work?
You can pluck a flies eyebrows with some of those...
Let's not forget the most important tools of them all: two rock steady hands, excellent eyesight and incredible patience!
Nice! I hope this type of tools, goods, etc. videos continues. I appreciate your style of showing and not talking. 👍🏻
Superb. A man of few words😉😊 An issue I have with adding in such small parts is that they don’t stay. The CA sticks to the tweezer or the part sticks to the tweezer and not where I am trying to put it. Then I have to manhandle the small part in place, flow in CA glue, usually too much, and hit it with kicker. Messy and usually residue. Your placements look much more precise🤔
ピンセット選びの参考になります。今後もツール紹介お願いします。
ピンセットだけでこれだけ揃えてるのが凄いというか流石というか・・・
精密な作業をするのに、これらの種類がそれぞれ必要なのかと思うと気が遠くなってしまいます
全て必要ではないと思います。色々試したいがために集めましたが機能は被るものがあり必要な2~3個あれば制作には問題ないと思います。
So I have looked everywhere for those Dumont tweezers... can you tell me where you purchased those? I have also discovered that there are several type of ss140 tweezers... which one specifically?
I don't remember exactly, but I bought it from an internet shop. The type can be found on the dumonttweezers.com homepage.
This is great idea! I love the fact you are not only showing tools but also examples what you are using them for. Thank you for sharing your experience!
Thank you!
The tweezers is strong with you... Very impressive skills sir, thanks for sharing. Have a great day. -David
oh) nice! i like this videos with tools review! great thanks
Are you a watch maker or jeweler by trade??
I love these kind of videos.Thank you!
Thank you for this video. Most instructive.
It appears to me that the four needle-pointed tweezers all perform the same function. Why have all four?
Yes, the four functions almost the same. It's just because of the greed for tools.
Very cool. Thank you for sharing
한국에서(알리 포함) 구하기 쉬운 트위저 중에서 끝이 잘 휘거나 굽지 않고 튼튼한 녀석은 무엇일까요? 추천 좀 부탁드려요 ^^
써보지 않은것은 추천드리기 어려울것 같구요.. 제 생각에는 모형메이커에서 만든 트위저가 적당하지 않을까 싶습니다.^^
@@A4Garage 타미야 같은 거 말씀이시죠.. 감사합니다. 영상도 너무 좋아요!!
A Turkish proverb: Tools work and hands boast..
I have a few great tweezers and a few not so great. I need benders most of all with all the photoetch I work with lately.
A really impression collection of tools! And you handle it like Herbert von Karajan his baton.
you answered one of my questions before i asked it. thx. more pls - files and saws maybe?
Wonderful video, please keep the tools videos coming! Can't wait for the next build!
Yes. . I agree. Everything Jeff M said! 👍👍👍
Thank you for sharing. Great video of tool of the trade.
Great video thank you for showing us the pliers you use for your models, thank you again
My friend thanks for sharing your different type of tweezers with us and how you put them to use!!!
to me and you Tweezers. but in the hands of a master they are tools....
그렇죠! 가끔 초고수들의 how to 이것도 정말 요긴한 정보이지요!
쓸모있다면 좋겠네요. 감사합니다^^
It's wonderful and a privilege to be able to watch you work. They are very nice tools, but it is the skill of the workman that creates the masterwork.
Thank you. Tools don't solve everything, but I think great tools make my work more efficient. If I find a good tool, I will also be greedy. lol
🫡 you DA man 🫡😝🇺🇸
I like the green ones with the fine point steel tips...when you bust those tweezers out it's usually to open doors, trunks, hoods on finished models. The fruits of your efforts finally revealed.
That was nice, thanks. Very interesting. Cheers
ピンセットがずらっと並んでいるサムネール画像をみていると、Snap-onのレンチがが並んでいる作業台を連想してしまいます。工具にこだわるのはモデル製作も実車の整備も同じですね。
良い道具は作業性も良いと思います。こだわりたいですね。
That's like - £100 on tweezers alone.
Oh no! Only 01:00 min in and my OCD is triggered. Hope that hair didn't cause problems later in the build! 🥵
Relax. I removed the hair.
Excellente idée de montrer les outils que vous utilisez.
L'outillage de bonne qualité est important, mais ce n'est pas l'outil qui fait un bon ouvrier !
La dextérité et la précision de vos gestes sont pour beaucoup dans la qualité de votre travail !
J'espère que vous nous ferez d'autres vidéos de ce genre. Dans vos vidéos, on ne voit que le bout des outils que vous utilisez. Ce genre de vidéo permet de mieux comprendre la manière d'appréhender le travail.
Merci pour cette présentation d'outillage.
Je me demandais si cette vidéo était vraiment nécessaire, mais je suis contente qu'elle vous ait plu. Merci
@@A4Garage bien sûr, toutes les idées sont bonnes à prendre.
De voir avec quels outils vous travaillez, c'est intéressant.
Et j'ai l'impression que je ne suis pas le seul en regardant les commentaires.
A bientôt et prenez soin de vous.
Where do you purchase all your metal pieces that you use on your models ie the very thin aluminium , along with the rivets and extra part from? Kind regards Barry P.S. love your work!
Most of them were purchased from domestic model shops, and some special metals were purchased from Japan.
Truly fascinating seeing the "tools of your trade" in action , looking forward to your next build , any ideas what it may be ?
Just to give some ideas....Metro 6R4 Belkits....
He posted the new project 4 days ago in the Community section. 😉
Thank you for your guidance
Thank you, what kind,type of files do you prefer?
I'll introduce it from now on.
Love your attention to detail on the models that you do.
You are an artist never seen such fine work like this
Thanks for this I’m sure I’ll not be the only one who had been wondering about the different types of tweezers you use. I almost couldn’t wait for it to finish so I could check them out on internet 😝
I take it there’ll be more if this is 01 👍
Yes, I'm going to introduce other tools. Thanks.
Thanks for sharing. Can't wait to see what's your next build.
He already teased it in "community" section ;)
thank you !
Gracias por entrar tu mundo, igual de mi parte siempre puse atención a tus herramientas, es mas parece Disney tu oficinal de trabajo seguramente, por todo lo que tenes... lo que mostraste el día de la fecha me encanta así se como te mover y que utilizas igual ya se te extrañaba en no publicar videos. ya no aguanto mas a ver cual es tu próximo proyecto.
gracias El próximo proyecto ha sido subido a la comunidad del canal. Estoy trabajando duro en este momento.
Where did you get the micro nut and bolt assortment I often see you use on your builds? Link?
You can find it by searching for Hobby Design or Top Studio Rivets. Thanks.
@@A4Garage thanks
핀셋만 15개........ㄷㄷㄷㄷㄷㄷㄷㄷㄷㄷㄷㄷㄷ 요즘 새로운 작품 만들고 계시는 거죠?? 기다리고 있어요~~~
새 작업 진행중입니다. 감사합니다^^
Hello Sir! I have a question about the audio/video setup of your fantastic work. Camera type, microphone?
I just shoot with an iPhone 14pro.
Impressive :) Thank you for info
한국의 자랑이다
Very good video, I look forward to more. Could you do one on glues?
I'll introduce it from now on.
Thank you for starting to detail the tools you use, done in the same excellent way you produce the car build videos.
As someone with a pair of eyes well into their eighth decade, I can't help but wonder if you use some sort of magnifying visor (or other optical help) for this level of work?
If so, which one?
Stunning models, btw.
Thank you! I am using Tamiya magnifying visor 1.7X.
Thanks for the response - much appreciated. I wondered if that was what you were using because it seems to attract good reviews. Difficult to source in the UK ... certainly at a sensible price ...
@@puzzledpaul2291 I think it's easy to use. I think this much is good because my eyes hurt when I wear it for a long time.
More tools!
Buenas tardes, en el segundo 37 de este vídeo, el motor sobre el que está haciendo la demostración a que coche pertenece? -
Good afternoon, in the 37th second of this video, the engine on which you are doing the demonstration belongs to which car?
Increíble los trabajos que hace
Incredible work he does
ruclips.net/video/Nq7OcD6Xu60/видео.html
@@A4Garage Muchas gracias
Thank you for sharing. I need some of these.
I have become addicted to your videos, they are an amazing inspiration. Your craftmanship is unmatched by anything I have seen. I have dreams abnout tweezers now. I am curious about that white block, is that a nylon block and doesv it have useful qualities for the building work?
It's styrene. It's not hard, so it's good to work on. Thanks.