new SIP 200cc vespa CYLINDER | fine FINISHING | 2/3 FMPguides |
HTML-код
- Опубликовано: 18 сен 2024
- fine finishing the really bad original sip "finish" as it comes out of the box. rounding all edges. removing casting slugs. HOW LONG does this work take? its never gonna be nice, cause of done badly in the 1st place BUT you should do it 1) not to only protect ur rings but also 2) to protect the coating, as there are some very sharp edges, so that it does not come off.
how sip can sell sthg like that AND also showing it in the shop article pictures (..!!) indeed earns respect for this huge self confidence.
#vespa #original #cylinder
___________________________________________
FOLLOW me on
insta: @FreakMoPed
fb: / freakmoped
___________________________________________
FMP playlists
all needed SERVICING VESPA guides:
• the ULTIMATE vespa SER...
SI CARB setting: bit.ly/2Nicmmb
O-TUNING: bit.ly/3hLAUlA
ULTIMATE basic vespa knowledge: bit.ly/3hLgtp3
vespa 177 TUNING: bit.ly/2Ynu26s
___________________________________________
DISCLAIMER: the information and statements in this video, are based on my personal approach, experience, observation and consideration. the statements DO NOT automatically mean, that any producer/brand/seller mentioned is not to be recommended in general and/or does have same potentials as maybe shown in this video. FMP is still just an amateur mechanic & on purose NOT sponsered by any producer/brand/shop ;)
_____________________________________________ - Авто/Мото
now let's use some fmp love and see how it goes
later on. yes. go some other projects first
Any plans to put it on the dyno?
way later. yes
Quality seems a bit shameful for sip. I had a bgm 200 a few km, it was quiet ok. Regarding to crankshafts 60mm would you use a bgm or sip dear master of experience ;-) greetings from Bavaria
never black esp regarding cranks. sip is primatist. one of best around.
What's the piston diameter of this sip cylinder?
standard 66.5mm
Ma rende qualcosa in piu