A GAME-CHANGING TOOL We Should Have Gotten Sooner! - THE SHOP Part 11
HTML-код
- Опубликовано: 19 авг 2022
- Huge thanks to the Team at Milwaukee Tool for providing their Pro Pex Expander.
Make sure to support the video and show some love Gang!
Milwaukee ProPex Expander tool
amzn.to/3wnNnVl
Spyder hole saw kit
amzn.to/3KhHGy4
Shower system
amzn.to/3Te6v2c
#milwaukeetools 
Хобби
How lucky is this kid to have. A great dad….
We already know how good the channel is but the fact that your viewers show enough concern for your physical well being and make suggestions about taking care of it is impressive. The best part of it is you actually look into it and graciously accept those thoughts and not to ignore them.
You and Jordan are very easy to like are not full of yourselves like some other you tube channels out there. I’m enjoying all the new tools that you’ve been showing, they will earn you more money in less time so it’s a definite win 🥇
yes agreed again I was just showing a friend of mine who I'm doing crown for, a clip or two from a video and I was like, cuz I had mentioned them before, see they're really informative in the down-to-earth way, he says yeah. And I was like and you can't deny that they have an infectious charm and a charismatic energy. To which he responds undoubtedly
Oh poo, you Gotta do what you need to do as a very small business. ( A small business owner")
Not only are you a skilled tradesman, but you are a great teacher. And you have a very approachable and down to earth way about you. I think one of my favorite aspects of this channel is the mutual respect you two have for each other. It's rare to see a father / son combo that gets along so well and appears to really enjoy each other. Keep up the great work. I hope your Stud Pack house is a great success and I hope you keep making and sharing these videos.
Last bathroom I had installed I insisted that the valves be on the opposite end of the shower, best decision I ever made on plumbing shower. No need to get wet turning the shower on and you don't have water constantantly dripping on valves which removes a leak point from direct contact with water spray.
Same thing goes for the shampoo niche. Seen a bunch of bathroom with shampoo niche under shower head getting all wet and soapy with mold. Best to install away from the shower opposite side of the wall.
One of the best channels on youtube today imo. Kudos to you for taking care of yourself and always embracing feedback. Your humble attitude isn't lost on anyone.
Of course he is humble. You can train a monkey to do this work. Residential work is bottom of the barrel.
Very well said. I mean the amount of effort and knowledge Paul has is incredible. Thank you Stud Pack!
Robert Sepehr has been the reigning champ for me lately too. I watch stud pack and then watch some history and anthropology guy talk about the occult. So much good stuff hidden behind all the bs on youtube.
Man, I gotta say, this guy is a comedian!!! I like his subtle and random jokes sprinkled in between his work 🤣
Great teaching and great videos
Thank you for making choices to take care of yourself Paul! We appreciate you guys and want y’all to be around for a long time!
Excellent video, welcome to Pex! The Uponor Pex A system you’re using is fantastic but worth mentioning that it’s better suited to contractors (where time is money) than weekend DIYers on a budget. Pex B for occasional home plumbing projects is still a great time saver over copper for those who don’t “plumb” for a living, and the equipment and materials are considerably cheaper than Pex A.
As this channel grows in subscribers and sponsorships, I hope you don’t lose sight of the DIYers on a budget, which you’ve always been considerate of.
Thanks for your excellently produced and edited (Jordan! 👍) videos sharing your knowledge.
PEXA is superior over PEXB in flow. The PEXB fittings have smaller inside diameter to allow fitting to slide into pipe. If using PEXB I have heard it suggested you upsize pipe by 1 size.
But this was never a diy channel he's a gc that bring us on the projects,have seen that table saw he uses it's like 2 grand.
@@cyraxkin No doubt, but they know most of their subscribers are not active contractors, or they wouldn't explain things in the detail they do. They appeal heavily to DIY, and they know it, and they've been great for us.
@@Tacompton425 That's true, but if you get metal fittings the reduction is minimal. But don't use plastic ones, it's much worse there since plastic is weaker and the fitting is thicker.
Also, there aren’t any licenses required to plumb with Pex.
Another great video! FWIW, the plumbing tape they use in this video is called "Blue Monster." I'm sure they've probably mentioned it before, but it's the best plumbing tape. Your attention to quality products along with your high quality workmanship just further shows your immense amount of experience, and you are only getting better. Great work!
Take some Teflon tape and twist it into a bead and wrap it on the threads. Then take the tape and wrap it over top as normal.
Here's my story about getting started with PEX, but from a designers POV.
I started working at a mechanical engineering firm about 20 years ago and they taught me how to do plumbing design. That's drawing plumbing plans, which is showing the route each pipe should take, and what size each one should be. The engineers at the firm always specified copper tubing so that's what they taught me to design for.
I left that firm after a few years, and had an opportunity to do plumbing design for residential architects. I specified copper tubing on the first few projects, but the plumbers doing residential work said they use Uponor Aquapex, not copper. The plumbers told the architects they'd like the plumbing plans to be sized for PEX and I was caught flat footed. I had Uponor send me their design manual which has sizing charts and maximum velocity specifications. That's allowed me to size Aquapex according to Uponor's specifications. I also talked to local plumbers to ask them if they installed PEX conventionally, like a tree, or if they used the home run system. They all said they preferred the conventional layout. With the manual, and the feedback from plumbers, I've been able to design systems that get approved by plan review, and the plumbers seem to be happy with them. The plan reviewer at the city who checks plumbing plans said that even he didn't have a copy of the Uponor manual at that time. He said that I was the only person in the city, including engineers, who was using it back then. I'm sure that I'm not the only one by now, but the city guy has always given me respect for doing things right.
Tell all your design buddies to tell the plumbers NOT to run lines in the attic. The typical high heat environment preheats the cold lines so that in the summer or on hot days, you now have "hot" cold water for minutes until the lines clear. It's a huge waste of water and very annoying. I am building my house out(full remodel) and I had to stop the rough plumber from doing this and run them properly under the house(raised foundation) where they were original. The lazy bastard just wanted to loop the long runs up and over in the attic space since it was a ton easier. He was not happy and whined that he always runs them that way. Not in my house you don't. BTW I was very hesitant to put PEX in, but succumbed to multiple plumbers' recommendations and the cost difference. Crossing my fingers it outlasts me.
@@ocavant
If I designed where you live, I would ask if the client wants their piping routed overhead, or under the floor, but that's not an option here. 99% of all construction here is single story, slab on grade. They used to run soft copper lines in the ground and pour the concrete slab later. 40 - 50 years goes by, and the copper lines start to leak, then you have to bust a hole in your floor to fix each of them. People here are not thrilled with having pipes under concrete now, so everything is above the ceiling.
We call for all the lines to be insulated, but that doesn't keep cold water from getting warm after sitting for a long enough time in the space above the ceiling. If someone wants cool water here, they keep a jug of water in the refrigerator or they buy a refrigerator with a chilled water dispenser in the door.
As for the longevity of PEX, they've been using it in Europe for decades, failure from time in service is longer than copper. Erosion is the thing that gets pipes, and it's harder for erosion to gouge through a rubbery material than a hard one. Try sanding a piece of copper, then do the same to a piece of PEX. You can abrade PEX pretty easily, but it's hard to make much headway. At least, that's my theory.
@@deezynar I’m doing a bath remodel and concerned about the brass fittings since I have municipal water I somehow stumbled on some talk about them eroding. I’m hoping the problem was with an older type fitting. I seen pictures of corroded Pex fittings but can’t find info to get to the bottom. You know anything about that?
@@danrichards496
No, I haven't heard anything about brass meeting an early demise just from potable water.
I found this
I LOVE THIS CHANNEL!!! Your exuberance and attitude are so addictive. Milwaukee has been my go-to for years when it come to my battery powered small tools. This is the first time I have seen PEX installed. Doesn't seem to get any more easy than that!!!
$450 for parts. The tools is where the money is.
I can't describe how valuable your videos have been for me. I do maintenance for an apartment complex, and I've used so much from your videos to improve my on-site time for requests, reduce costs, and drastically improve my overall renovation quality. Your type of knowledge and communication of said knowledge is very much appreciated!
I switched to PEX 3 years ago. Never ever going back to copper unless it is required in plans.
Best Tool Ever!!!
Be sure to mention to viewers that there is Pex A and B and that they are not compatible fittings.
If they're not compatible, that's gotta be for a good reason. Probably "they're not meant for the same things".
I'd like to know what the major and maybe minor differences are between Pex A and B, and the use case (aka when, where, and why) for each type.
For example, I'm wondering if one kind of PEX is better at withstanding the water in the pipes freezing, or if either kind is suitable for use with hot water based baseboard radiant heating systems like we have in my house. Being that it's plastic, I have my doubts about that second one, but Pex tubing being rather flexible means that it theoretically should be able to withstand a frozen pipe condition much easier without failing.
EDIT: I'm also aware that there are now systems out there for distributing compressed air that are based on plastic pipes rather than the more typical black iron pipe of days gone by (great cause now you don't have to worry so much about those pipes rusting). However, for someone on a budget I'm wondering if PEX could be pressed into that application.
See, I've got a large garage at my house along with pneumatic tools, and the compressor is gonna have to stay in one spot. So I want to know if I can save some money by using PEX for the compressed air rather than black iron pipe or a (likely high-dollar) system based on polymer pipe or aluminum pipe.
@@44R0Ndin They are basically the same thing, Pex A has larger diameter fittings for higher water flow and Pex A is constricted by the flair fitting you saw on the video.
Pex B has smaller diameter fittings which constrict water flow AND they are crimped around the Pex by a metal ( usually stainless steel) band that requires a different pliers that will fasten the pipe to the fitting.
I have both systems because you have to go with what’s already in the home. However I do not like the Pex B crimp rings because I have seen corroded ones and I won’t put that inside a wall.
Which PEX do you prefer? I’m new to PEX and would like to learn more about it.
@@gerrylara4783 Pex A. The constriction rings are stronger and will never corrode in a wall.
If a customer already has Pex B in the house I can create a transition with other fittings to get to Pex A and go from there.
If you go to a home center and look at the packages that the fitting come in they are clearly labeled A of B
@@jeffreyhalet9632 Copper crimp rings corroding? Or are you talk about stainless steel "pinch" or "cinch" rings? In either case, ring corrosion to the point of "corroded" (structurally compromised) is almost unheard of. In any case, Pex A system is superior in many respects but also a good chunk more expensive to deploy. Pex B is good enough for most home uses, and many sources who've tested it show that the difference in flow rate between Pex A and B is negligible. In my case, gradually changing my house's extremely corroded old galvanized pipes as time and money allows, Pex B has worked phenominally. I use brass compression fittings wherever possible, as they have slightly better flow rates than the plastic fittings. And I use Sharkbite "push-to-connect" fittings in many places in the basement where I know I'll be changing the layout with a future project, and those have worked absolutely without a problem and allow quicker, easier changes as my plumbing replacement project progresses.
Another fantastic video boys! Glad to see Milwaukee realizing your value. Ask them for a planer so you can get those walls absolutely plum square and level before you put backerboard on the walls. It will save you so much time when you get to the tiling. I wished I had done it 15 years earlier!
The best father son contractors and can't wait for Texas!!
Loving how thorough these videos are and how we are getting a small look at everything! Plus, I am now dying of anticipation to know which inanimate object I'll get to live vicariously through next!
1st!!! Learn so much from you guys every video! Keep up the good work.
I love that you guys use monster thread tape. It's really good tape my company made it a mandatory monster tape then pipe dope It's seems like an overkill but it's a very rarely thing to have a leak. Leaks seriously have cut down significantly. Love your videos love the father and son duo
Dude, everyone knows this but Paul is amazing as a camera personality...and obviously as a tradesman. Respect. From an expro baseball player who does handyman work now
Man, I gotta say, this guy is a comedian!!! I like his subtle and random jokes sprinkled in between his work 🤣
It's been great seeing him open up over the last few years of content.
I love pex. Suggest that you mention the difference between the different types of pex tubing and fittings so people don't incorrectly try interchanging them. Also mice and rats like chewing on pex like they do on Romex wire. So make sure you block access to it by mice, especially in an area that will be difficult to access for repairs later on like behind a tiled wall.
Good point. The vermin are especially active in chewing through pex after they've been poisoned.
Oh no, I may stick to copper
@@harrycojones4273 Major advantage in freezing climates like my place in Michigan is that pex tubing won't split when water freezes in it like copper will. It can flex/expand. See Matt Risinger's channel where he runs freezing tests on different plumbing tubing. I spend extra on the brass fittings instead of the less expensive plastic fittings so they can better withstand a frozen plumbing situation. I'm putting Pex in my personal home remodel and just used it it 2 homes I rehabbed/flipped. I used Pex B in the rehabs but I'll be using Pex A in my personal home.
be the change you want to see in the world. I laughed and it's a great message!
How are you guys so awesome? The charisma. The clear explanations. The gravitas! Keep it going guys, Stud Pack is so good! Also, your editing is fantastic.
15:37 in and great vid; nice editing, transitions and all!
I know most are going to say AHHHH or NO; but next time just take the handle off the shutoff valve and you don't have that trip/spray hazard. Tape the handle and screw to the assembly so it doesn't get lost. Got a subscriber here!
I worked as a plumber for 4 years in SD, we also used PeX systems - but it was the other kind, with the metal crimp rings. Love the stuff, never had a complaint.
Right now, I am doing a kitchen remodel and the bossman got some PeX fittings just line you are using. Imagine my surprise when the fitting wouldn't even go into the pipe. Looked into it, discovered that there is more than one style of fitting. Boss decided to try this new type, so he got some rings and the expander tool (the manual one, no batteries for us!).
It took 3 days before we could turn on the water - every one of the fittings leaked until the plastic tightened down enough.
Just give me the old kind where you can turn the water back on as soon as you have assembled the water lines.
Great work. Thanks for the tool recommendations. Paul, glad you are taking care of your health.
ProPex and The expander tool (not cheap) but amazing and so easy to plumb. Especially on your back under a house.
Just realized the last 3 houses I've lived in had at least one faucet up high... And then the other one was practically in the dirt. So I'm definitely a fan of no bending over hose bib.
Been following y’all for about a year and a half or so, I love your videos! I learn so much and Paul you’re so humble and kind. You guys are definitely one of the best channels. Blessings to your guys’ family through the move and stuff!
I love watching you guys! True craftsmen. I especially love how nothing really phases you. Just roll with it and figure out a solution.
You two are never on my “I forgot to watch list” 😂 Multiple jobs? Biz must be good!
Loved this video. To the point and informative. Good new tool recommendations with brief demos. 👌
Thanks for showing all facets of the construction process including the return trip to the store to pickup the stuff you forgot about or didn't know you needed. Truly, a standard step in the construction process. Love seeing you use expansion pex. It's so much easier! You never sweat when you expand.
Thank you for the introduction to using PEX!! Well covered and kudos to Milwaukee for providing you the top of the line Pro Pex Expander!!! I'm sure you will be making optimum use of it. Please keep the great, informative, and educational videos coming!!
Your extremely knowledgeable in your field of expertise!!!!!
I wish I could hire you in Tennessee.
Stay strong!!
Love watching this awesome bathroom coming together. I’m learning a lot. Thanks guys!
I love that Paul briefly re-addresses some of his tips and tricks as he installs and builds regardless of how many times he's mentioned it in videos past. It really helps as a refresher/reminder to remember to try these tricks out (finding center with less hassle for example) when I've been doing something one way for so long.
Thanks for taking the mystery out of Pex connections. I am ready to tackle my bathroom remodel - switching from one old vanity to two separate modern ones. Great job, guys. You make it all worthwhile!
Snagged a few of the spyder hole saw bits on clearance and love them. Will definitely look for that kit. Great vids guys!
I've been a DIY residential renovator for many years. I think I've learned everything by doing it wrong at least twice. Thank you guys for showing Father/Son teamwork, for having great attitudes, and showing how to deal with mistakes. I've also learned at least a few building tricks from you guys!!
"Which ones need more love then others? Well, we're gonna show you"
AUTOMATIC THUMBS UP.
You guys rock, 24 months after I watched my first video of yours, *still* the only channel I can't *not* watch immediately.
Only other contender?.. "Practical Engineering"
Also, add your amazon tool links to the description. I need those Spyder hole saw bits.
Omg we love you, Paul! Best channel. I dunno how I'm learning so much and at the same time so entertained!
1:10 Yes! Using cheap galvanized, I have changed my outside hose bib so it’s at human level (4 feet high), and added a faucet for filling dog water bowls, buckets, etc. It cost about $20 and is a shockingly better solution.
And I used Pex to run a water line 60 feet to my backyard … run inside my wood fence. Super easy.
any concerns with bursting the pex in winter?
@@beglitchery I’m in LA, so no. I don’t know how well it handles freezing temps.
@@johnsrabe better than copper
@@beglitchery There are a bunch of tests on RUclips, but Pex shouldn't burst like copper when it freezes.
I said it before as and I'll say it again! I love your attention to detail!! Awesome!!!!💓
Pex A is the way to go! I did my bathroom a year ago and had my 15 year old son and 9 year old daughter do the Pex A fittings to show how easy they are. Major gamechanger!
I have waffles on the milwaukee per tool. But after watching you use it. That is is going on my tool to buy list. You both do such an awesome job. I appreciate the time you put in making the videos for us all to watch.
Milwaukee, Rigid, or Dewalt...depends on which battery system you may already have. I'm a Dewalt guy, plus...the Dewalt system was over $100 less than Milwaukee.
@@chrisosti Same here. I've already got plenty of batteries, so the bare tool wasn't too bad.
Paul, I was SO impressed to see you going with Pex A!!! You lucky dog even scored the tool from Milwaukee!!! A little suggestion from me to you...ditch the Teflon tape and go with Loctite 567. Teflon tape can shred and clog valves etc...You can thank me later. :)
You should also mention the biggest advantage to the Pex A is all the fittings are FULL FLOW and do not restrict the flow like Pex B or C.
That's great to see you have one of those, and I got to see you use it. When I get a Bathroom remodel I am going to buy one. Thank You Ray
Thanks so much guys. I always feel like I’ve refined my own skills a bit whenever I watch your stuff.
These two guys [jets] are for these two guys [cheeks]. ROFLMFAO!
I love how you guys walk us through not only the actual work, but the thought process and planning to make sure the end result is exactly (or as close as possible) what you want. Thanks for another great video guys!
Looking great Paul! Love all the new tools! You need some Amazon affiliate links to these tools!
WOW, I just love that PEX tool. Never used it myself but does it look fast to fit. Thanks for sharing.
This is my favorite vid so far. So funny, and your attention to detail makes my perfectionist DIY self happy. You got my thumbs up after the "be the change you want to see" salute.
You guys rock! Love the videos and learning so much. Keep it up! Some of the best content I’ve come across. Also love the nod to the comments section.. haha!
Really agree with the other comments you get. It's- very refreshing and instructive to see how you embrace constructive criticism, even when its very personal.
Everyone likes how you are open about mistakes and even some minor shortcuts you take on a Sunday night..! I personally like the little references to morale deflation when you realize something is messed up - and of course the re-boosting later when you know it IS finally right.
You seem to have a sure touch with the sponsored tool messaging too.
You really do have a distinctive and superior RUclips channel now. We appreciate it. Thank You.
Thx 4 sharing this video, I really like how U mount all the things "nice & solid". I also like how U think & do things, showing the pex expanding tool & "new" hole saws was nice to see as well.
Nice work! I like how you take your time and think through everything to make everything fit right!
Being a older construction guy it took me awhile to get away from hard pipe copper I still would not use PEX under Pier and beams to many critters to chew into my lines another great video you guys thanks
Love the comedy in this one haha
Keep it up fellas! 🤘
Love your videos. Such a help for me fixing up my home. So happy you are being health proactive. We need you around for a long time 🥰🙏
Great video! I had to install a whole house filter and I went with the same PEX setup. The Milwaukee expander tool is amazing! Cuts the install time by more than half!!!
Absolutely love that tool-and I’m not even a plumber. If you ever find yourself needing to remove a fitting, a heat gun or torch is your friend. Heat the ring to soften and carefully slice the ring (perpendicularly) to remove, then continue to heat the pipe for final removal. In a pinch you can reuse previously-removed fittings. Also if you get a kink, heat it and it’ll return to its original shape. Lastly, pipe bend supports are usually less expensive than 90° elbows (if you have the room), are quicker, better flow, and less joints.
all true.. but i never use a heat gun or tourch to remove.. i just cut them.. lol
@@adamdimaggio2237 when you have the room to cut them yes, absolutely-it’s faster-but if you don’t have the room or short on fittings (which was my point) then heat works in a pinch.
A gentle curve, and yes pretty cheap.
That’s awesome! Taking a much needed break from our remodel to catch up on the latest studpack! Been using your drywall videos like crazy, this will be my 3rd drywall project and FINALLY one I will actually admit to doing!
Great Job Stud Pack. Love the Pex and thank you Milwaukee for providing you the tool. I may need to add it to the arsenal in the garage.
Great video. Love seeing all the new tools… and we ALL need new tools!
Missed opportunity for a great transition from the gym discussion to the talk about running PEX (pecs - big flex!) 😁
Also being in the ballpark with your stubout in the urinal.
good one XD
Kudos on your working out routine. I started the same in July. I feel better already. / Those Milwaukee tools are nice. / I often think hose faucets and electrical outlets should be waist-high. Not certain Code would like waist-high electrical though.
There isn't any code against that.
I really like the way the project is coming along and how the episodes are divided by steps
Great job guys. Usually when I have body sprays and other multiple spray options going to my divertor, I stud that wall with 2x6s so I don't have to snake alot of lines. Glad to see your using uponor.
I like seeing channels becoming bigger and getting sponsorships. Good job @Studpack
Could you add a link to the shower heads you bought from Amazon, please? I would like to look into it considering we are going to be remodeling both of our bathrooms. The house we are in needs a LOT of work and can't afford a contractor. So, your videos have been helping SOOO much! Thank you for your quality of work and explanation of why you do what you do and the products you use. We have a special needs son and we are trying to get this house in better condition since we live paycheck to paycheck. And thank you again! ❤ If I could add pictures of what we have to work with I would, lol. But at least my fiancee is an electrition.
I'm sure they'll add a link when they get to them... but they've certainly been keeping them a secret/hyping them for the whole series :P
I have the same Pex Expander. The best plumbing took Ive ever owned. Ive heard it struggles in the 1” stuff but Milwaukee makes a larger M18 version as well for people doing larger pex
If you step up to the higher amp battery it works a little better. I’ve had better results
@@plumbbuild6517 Ive only used the batteries that came with the kit. I have no idea what they are and 3/4” is the most Ill probably ever be messing with but if I need to use 1” ever Ill be sure to remember that. All of my tools are m18 but I have that expander in m12 and thats the only m12 I have.
PEX is an amazing product. So quick and easy to use. Helped a plumber friend of mine and was amazed how quickly that install went. Definitely a time saver.
Kudos to Milwaukee for sending you that Propex expansion tool. The design looks great and once again, it look like it saved you a lot of time when compared to sweating pipes.
Project is looking amazing and I am excited to see the finished product. Especially that wall you keep mentioning!
Great video and work, Stud Pack!
So glad I have found your channel. Loving this build. You sir a master at your craft. You and your son are a great team.
really glad to hear you guys went with PEX-A... gonna need some words in a future video to explain to folks the difference between PEX-A and PEX-B.
No doubt. Related note, the second digit printed on any PEX pipe indicates UV light resistance. One of the few weaknesses of PEX is how fast it can be destroyed by light. In some places, the inspector will cut it up on you if he sees a roll sitting outside in the sun with no cover on it.
@@ILruffian never knew that. Thanks!
@@FrankGraffagnino Anytime. The number "3" in the second position represents 6 months of UV exposure, which is the highest rating in the ASTM F876 standard. You always want to keep PEX out of the sun, but it's nice to have some margin for error.
Great job Paul! Love the videos Jordan. Stud pack house is going to be epic!
PEX A is such a sweet solution. When working in cool areas a heat source is required to assist the shrink of the fitting. Most mention a heat gun but I had great results with a travel blow-dryer (Enough heat & the small footprint works in narrow joist & framing).
Wow another great trip ,to try out your shower valve by hooking it up to a hose,I've been remodeling for right at 22 years and I'm still learning,simply love building homes,GOD BLESS
I know I cant be the only person who is so flipping excited for the TEXAS series! Let's GOOO!!
20 mins on any other channel on YT is an absolute chore, but 20mins here is an absolute breeze! Great content and knowledge being shared here! Long live the stud pack!
Great job guys…you are really doing a wonderful job with your channel. Very natural in front of the camera.
Oh I agree 100% on the pex expansion tool! We re-plumbed 90% of our home during our renovation. We used pexA pipes. It was the easiest plumbing I've ever done. The advantages of Pex A are plentiful. We are also in agreement on the hot and cold hose bibs on the outside of your home. It's so nice having hot water for clean up jobs outside your home.
Let me save you the trouble, it's a scam. I advise giving them random information to cause confusion.
you should do a test to see how how much time you have before it wont fit on the fitting
Excellent video guys. A + content, A + production and A + talent. PEX A and Uponor fittings seem to be the global choice for most plumbing applications. The battery powered expander by Milwaukee is a thing of beauty. Keep up the great work guys. Blessings
Thanks for sharing and a great video. Keep up your good work. From Wyoming be safe out there youngen.
Awesome video Stud Pack! I always learn something new. Thanks, see you in the next one!
Those exact stub outs screwed me once. I had a plumber sweat on a male fitting and screw on a valve for a kitchen sink. Well he monkeyed the valve until the stub rotated the elbow in the wall, breaking the plastic clamp on the PEX and tearing the PEX in the process. This was discovered when we turned the water on.
The copper plated steel square plate is only connected to the pipe with a few pinched dots, and the pipe will rotate when you force it. I now sweat the pipe to the plate for extra security, and also use at least three clamps on the PEX at the elbow.
Oh, and NICE Schick wrench!
0:24 "My days of soldering copper are over." 5:46 "Let's solder this together." 😂
I only tease those I love, and I love your channel!
He didn't solder it during the day........He soldered it at night! 🤣🤣🤣
Thats the thought I had 3 years ago, when I started using it. Really changed my plumbing planning, since there are no restrictions in regards to the flow except where turd are involved. The hose's flexability and how it is always "contracting" at the connections, makes the product great. Too bad it cannot do high air pressure over 200 psi, due to its water H20 advantages.
you guys are awesome, funny, honest about things you know and things you don't.... Very well explained and encouraging for people who don't do this everyday... great work
Pretty good work, the body sprays should be plumbed in a loop ( connected together in a circle) for equal pressure. Other then that looks good.
Yes! I've seen plumbers make that very mistake. Luckily, they tested and found out that "The Loop" is essential for equal pressure. Good thing is, is that he has 2 feeds instead of 1. Cross your fingers.
Hey a good way to seal a cut or wound up is get some liquid bandaid and hold the cut closed spread some over the cut and it dries within 15 seconds I put multiple layers on and you can work with it better than a bandaid. I keep it in the truck for emergencies!
That is way cool! I made the switch to Pex A 2 years ago and wont go back. Glad to see you also using this fairly new product, you guys are spot on.
Great job fellers. Great delivery. Great energy.
Great video! What type of screws are you using to secure the stub-outs? I have always used copper nails to be sure that there won't be premature metal deterioration, but would love to have an alternative.
I'm thinking the same thing
why would there be deterioration? its not getting wet. or do you mean some sort of dissimilar metals reaction?
@@conradcoolerfiend dissimilar metals - unless they are using stainless steel screws, that is okay to use with copper - maybe coated screws will be okay, brass, copper okay, anything else - no
@@groovy1937 ahh I see thx
It won't corrode or cause any electrolysis unless it has water moving through it.
Great video - BEAUTIFUL JOB!
One suggestion. You might want to consider using Sharkbite connectors for your shower control. Why you ask? The Sharkbite connectors can easily be disconnected if you need to replace your control valve. Where I live, the water is hard and the control valve has to be replaced every 10-15 years. I am prepping to remodel my two bathrooms and replace the soldered-in control valves for the showers and I am not looking forward to it. if they had Sharkbite connectors, the job would be far easier.
I realize that you can heat the PEX and remove it, but I trust the Sharkbite connectors more than PEX that has been reheated.
It's going to be tiled. I personally never run sharkbite behind a wall where I can't get to it, but if the controller goes bad, it's going to be tile breaking time anyway. Sharkbite is great for repairs when you don't have other options.
@@AKJammer1 Yes, I used to be just like you. I had an experience that changed my mind radically. I had to replace my exterior water line connection to my house during the 2009 recession and I was hurting for money. Our state was devasted by Obama's asinine economic failures. I decided to use Sharkbite fittings, even though I did not trust them like you. I especially did not trust them for the main connection to my house, but in my situation, I thought they would at least last a few years.
Fast forward to today, approximately 12 years later and I have never had a problem with the main connection I installed that has three Sharkbite connectors. It's never leaked or had any problems. Based on this experience, I have grown to trust them nearly as much as soldered connections.
I am going to be installing new shower controllers in both of my bathrooms and I am considering installing a stainless steel square behind the escutcheon on the control valve that will allow me to change out the shower control valve if necessary. In my location, the hard water eats them up and I don't like soft water systems.
One caveat on this line of thought. It appears that Kohler and Delta are using hardened stone-like discs within their valves, so that it is unnecessary to replace the cartridges in the shower control. I have a Kohler kitchen faucet and its valve mechanism appears to be designed to protect from hard water. It also has a coating on it that protects water spots from clinging to that Kohler calls "vibrant" and it really works spectacularly. I can use a wet rag to clean the faucet in less than a minute, it's amazing. My kitchen faucet is three years old (approximately) and it looks brand new. It just blows my mind. I just bought two Kohler bath faucets for my guest bath that have the same Vibrant coating. I was never a Kohler fan until I bought my kitchen faucet from Costco (I knew I could return it if it sucked).
If your shower control valve has this technology, it is possible that it will never need to be replaced - or at least, it will last a couple of decades before replacement is required.
You did a great job on your video and you're absolutely right, nobody makes the shower control valve accessible. However, I am considering making mine accessible in some manner when I remodel my bathrooms.
Again, you did a wonderful job with your video and it is very informative.
My dad and grandfather were plumbers, I’m sure they would have loved to have pex back in their day. I remember seeing my dad put together cast iron drain lines using lead and oakum.
beautifull job all around......DME construction in SOCAL....thumbs up always.....and now for a cold one. oh, the word for the day is "elastic recoil" and NAIL PLATES GALLORE!!!!!!!
love using the uponor expansion ring pex-a system! one thing you'll find (and it will drive you CRAZY) is sometimes if tubing gets wet the white ring will slide down / away from tool when expanding. answer is take a break and use a cloth / paper towels to get tubing bone dry again :). took me a while to figure that out. always enjoy your vids!
I was having the same problem but I use surname expansion rings they have a lot better stop and the new shark bite expansion rings have a better stop as well I like uponor pipe but there expansion rings suck
Dang ole auto correct on my phone Lol but the zurn expansion rings and the shark bite expansion rings are better in my opinion . But everyone has their own opinion I’m not a big fan of the uponor rings I’ve had to many 3/4 rings slip on me and had to cut the pex back to install a new sleeve I’ve never had that problem with zurn or shark bite.
The suspense was killing me. I couldn't wait to see if they went with pex a or b. Then I saw the stubouts. Pex a for the win.
pex a for the high volume pros (or for the tool budget endowed), pex b for everyone else !
That tool is awesome! Very helpful thank you!
I really like how you to explain stuff that anyone can understand even if their not in that field