Hi Gerardo Anaya, The software for the EA9 will read the EA7 panel program. (This will be an EAP extension file) You will need the EA7 software to download the program if you don't have the file. (C-More Programming Software V2.78 SP2) Once you read the EA7 project, the EA9 software will convert this for you so it can be downloaded into the EA9 screen. Here is a video on the differences between the two screens. www.automationdirect.com/videos/video?videoToPlay=MEhlU0iBzxg EA9 Software is a free download. support.automationdirect.com/products/cmore.html Here is a link to our C-More EA9 Series on the website. accautomation.ca/series/c-more-hmi-series-panel/ I hope this helps you out. Regards, Garry
@@ronaldj.cartersr.577 I do not have a video showing this, but you will not require read/write commands. The HMI will be the master communicating to the slave. You will just need to know the unit number assigned to the port and the serial parameters. Assigning the Productivity Serial driver in the HMI will do all of the communication and timing. Regards, Garry
Hi Alex, If this is an EA9-RHMI (headless) C-More you can access this through the USB connection. accautomation.ca/c-more-ea9-hmi-series-headless-rhmi-setup-screens/ All other units must access the setup screens through the touch panel. cdn.automationdirect.com/static/manuals/ea9userm/ch5.pdf I hope this helps you out. Regards, Garry accautomation.ca/series/c-more-hmi-series-panel/
I have a EA7 hmi can I just like copy and paste to EA9 hmi? It work like that or I need to connect the computer?
Hi Gerardo Anaya,
The software for the EA9 will read the EA7 panel program. (This will be an EAP extension file) You will need the EA7 software to download the program if you don't have the file. (C-More Programming Software V2.78 SP2)
Once you read the EA7 project, the EA9 software will convert this for you so it can be downloaded into the EA9 screen.
Here is a video on the differences between the two screens.
www.automationdirect.com/videos/video?videoToPlay=MEhlU0iBzxg
EA9 Software is a free download.
support.automationdirect.com/products/cmore.html
Here is a link to our C-More EA9 Series on the website.
accautomation.ca/series/c-more-hmi-series-panel/
I hope this helps you out.
Regards,
Garry
Can you setup the EA9 to communicate through a P3-RX?
Hi Ronald
The EA9 would communicate Modbus RTU (RS485) through a P3-RX.
Regards,
Garry
@@ACCautomation is there a video showing how to set this up in the cpu? I am assuming you might need to use read/write commands.
@@ronaldj.cartersr.577
I do not have a video showing this, but you will not require read/write commands. The HMI will be the master communicating to the slave. You will just need to know the unit number assigned to the port and the serial parameters.
Assigning the Productivity Serial driver in the HMI will do all of the communication and timing.
Regards,
Garry
can i access to System Setup without touch panel? only with physical keyboard or mouse through usb?
Hi Alex,
If this is an EA9-RHMI (headless) C-More you can access this through the USB connection.
accautomation.ca/c-more-ea9-hmi-series-headless-rhmi-setup-screens/
All other units must access the setup screens through the touch panel.
cdn.automationdirect.com/static/manuals/ea9userm/ch5.pdf
I hope this helps you out.
Regards,
Garry
accautomation.ca/series/c-more-hmi-series-panel/
@@ACCautomation is not a rhmi, i no have this support in my model,, my model is ea9-t8cl
@@al3xcg
You can only access the setup screens through the touch panel.
Regards,
Garry