How to Replace Transmission Filter 2012 Toyota Corolla
HTML-код
- Опубликовано: 26 авг 2024
- This is how I replace the transmission filter and fluid 2012 Toyota Corolla.
Filter and Gasket: amzn.to/3qbBhLQ
Toyota WS ATF: amzn.to/3r1WGIK
Hex Bit Set: amzn.to/3xkDIyq
Written Guide:
www.backyardme...
Excellent straightforward easy to understand video, except you left the original strainer o-ring inside transmission case!
It looks like to me. The old O ring was stuck on top of transmission.
yes' I agree
Great video, just an observation, when the engine is aluminum you have to be precise with the torque, screwing the bolts too tight my screw up the tread on the block causing that part of the pan to be loose and drain fluid, I did exactly the same job on a caravan just using my tight guess, after a while i saw some wetness on the pan and a little leakage that i need it too re tight . On my corolla 2015, with 130K I took it to Toyota dealer, they say they do not change filter just a flush, I preferred this time to do it in Toyota fro 180 cad, It is an easy job but the hard part is tightening the bolts precisely and adding the exact amount of Toyota fluid,
So for the price of the (expensive) Toyota fluid and the labor, it was't too bad of a deal. 110 for 7L fluid + 70 labor and taxes, without stress
Thanks for you video
I didn't see you put the magnets back between the gasket shot and when you were bolting the pan up. Was that deliberate? Is there a legit reason to not put the magnets back?
Excellent 👍😊
This was very helpful, thank you for sharing!
Thanks man! Helped me a lot, nice tutorial!!
Thanks for the video. Very helpful.
Can I get the link for the filter please?
Good video, only it isn’t shown put magnets back on its places inside the pan before final pan’s installation. These magnets are important part of fluid filtering system and help to keep it out of metal particles.
Thank you very much. It's really helpful
this helps a lot man, Toyota fan here.
I am more into Manual tho, thanks for vivid explanation.
Stay safe.
Mi car. Have 150 milles. Is necessary. Change oil transmission
It is better if you use torque wrench for this job . Especially the transmission pan bolts and drain plug.
he probably feels it, over time by doing it.
Tho he didn't mention torque spec tho.
I think you Forgot the two Small Square Magnet?
ow yeh, i just notice that, he might be.
thanks!
i have a question bro is had o-ring that filter
how many quarters of transmission fluid for corolla 2012 for replace
you can not change the total max quantity, that would take several changes, unless you flush it with a machine like I did in Toyota dealer.
The advantage of this video is to change the filter, but is your choice
Hello I have a question about the transmission fluid just me I add the transmission fluid after the check engine and track off turn on .so what can I do
I'm curious. The transmission filter you are using to replace the original is not even close to OEM, and seems rather cheaper. The OEM is over 100 bucks. The 14 dollar one you bought off of amazon hasn't caused any issue?
I think it's fine. I use after market transmission filters and lately from Amazon with faster free shipping. Oil filters however always the best Fram ones I can find.
You left the old o-ring in there.
Yes
What is the recommend mileage change time on this part?
from 80k to 140k
Yeah, it's fun to mess with transmission fluid without wearing gloves.
Your link to the filter doesn't work. What is the part number??
I updated the link which should work now. The part number is ECOGARD XT1294.
Wat if it’s at 120 and u just go to valvoline
And they just do the trans replacement
Why is a transmission flush bad?
It was never changed and had been driven 100k plus miles. You should change it every 60k miles or less if you do alot of driving.
No le punishes El empaque (O Ring) al filtro de La Transmision.
Pensé que había visto el viejo anillo "O" pegado a la transmisión. Es por eso que el nuevo filtro no encajó en su lugar.
Comes with a rubber Oring on filter so be whatchfull when your doing that one other thing buy a plug aluminum seal when you buy filter if you don't no torc specs star padern, untill you see it squeeze then stop and always measure it put back what you dump DON'T Overfill it!!!
You have to change your transmission fluid every 30k miles drian and fill you also don't have to change your filter waste of money.
Have you checked the alternator? It could be switched up with a carburetor for more fluid airflow through the shift column.
Then, by process of convection, you will maintain pressure throughout the drive terminal, providing the drive terminal is centrally located UNDER the main pressure valve caddy corner to the secondary valves in the rear, which may or may not be eliminated entirely.