Блин, как приятно и полезно было посмотреть этот видос!!! Ну прям как в поговорке -" дорога ложка к обеду!!!!!! Второй год собирался сделать типа такого движка для вентиляции , вернее для обогрева, а ещё вернее тепловая завеса двери - сверху вниз " У меня правда уже давно стоят промышленные , но они не сильно, но нудновато гудят , обороты и мощность соответственно сбрасываю кондёрами (кстати, в доме теперь пол тёплый реально, даже возле самой двери в сени. вроде еле дует а вот поди ж ты бля - мож кому пригодиться)) ) Короче. замыслил сделать "поширше" поток, да потише но , но много но. Шире крыльчатка , мощность давишь и шиш. Хотя и провода и магниты с Али уже пришли давно, но не срасталось в башке! И вот такой подарок!!! Наглядно , просто. прям в десятку!!!))) Подтвердил все мои "диванные" мысли, сомнения рассеял!!!. Класс! Лайк и спасибо! Уже встал с дивана!!!))))))
I advise you, instead of a wooden sleeve for the axis, to make turns of thick paper with glue on the axis. It is easier and faster and the main centering of the rotor will be better. I made an uneven wooden sleeve and therefore the rotor vibrates, makes a strong sound and slows down the speed. And yet: the number of magnets is not necessarily 6, you can make any number of magnets from 3 to ... The main thing is that the magnets are located with the same poles to the coil.
Что ваш Серл, что Капанадзе - это всё из одной серии - фейки, чтобы привлечь внимание. Лучше учите физику - ru.wikipedia.org/wiki/Закон_сохранения_энергии Ваши умники поломали законы физики? :)
Good question! The motor requires careful adjustment of the switching contacts. I think that in each case it will be different, so it makes no sense to tell. It all depends on the thickness and length of the switching wires, on the strength of the rotor magnets, on the magnet strength on the switch as well as on the distance between the magnets, on the voltage, coil parameters, coil location, friction force and more.
Yes, the magnets in the switch repel. I thought it was clear and did not write. Yes, it was necessary to move a little slower at 3:30 in order to be well understood.
Thank you! Without an iron core, the electromagnet is not very effective. I made a motor without cores, it rotated very weakly and took a very large current, the coils were very hot - ruclips.net/video/BpvCH01ITGA/видео.html
It is not so easy without experience. The main conditions are the minimum friction in all joints and the accuracy of performance. Also need good batteries with high current, it is alkaline or rechargeable batteries.
I have a question. What was wrong at the time of the video 4m:13s? I have been trying to replicate this experience but it is like in this case, it does not continue to move. The diameter of the axel is important? Thank you.
No, a permanent magnet will not work instead of an electromagnet. Do you want to make a perpetual motion machine? :) This is contrary to the laws of physics.
btw, it is easy to convert an inexpensive screwdriver into a steel shaft or axle. shimming an axle/shaft with tape, ca, etc, in order to achieve a friction fit in a bearing can work reasonably well. it is possible to salvage miniature precision bearings from most 'dead' rc cars and helis. cheers
В этом и заключалась бОльшая часть настройки + контакты ближе/дальше. Можно заметить, что в рабочем варианте контактный магнит чуть ниже - провод, что его держит, чуть согнут. А в начале был ровный. Устанавливал изначально на одной линии: пуск. магнит - ось - катушка. Но для эффективности нужно смещать, очевидно, играет роль время отклонения магнита. Причем, направление смещения, очевидно зависит от направления вращения ротора. Не проверял, но думаю это так.
Аналогия с углом опережения зажигания в двигателе внутреннего сгорания. Рано плохо, поздно тоже плохо. Ещё и зависимость от частоты вращения. Быстрее крутится, раньше нужно "искру".
thanks for posting. mediocre work. precision is low, in this iteration. here are some things to consider. HARDENED steel should NOT be used for the core of a solenoid coil. a hard steel core will Soon become Permanently magnetized. as a core, a few common nails Should be used; or other suitable ferrous or mild steel object. the use of a 'normally-closed' switch design results in low energy Efficiency; and it does Not accommodate tuning the motor's performance, by varying the duration of the 'coil ON' period. above a certain speed, such a switch tends to be in a 'floating' state; where contacting is chaotic, Not controlled (as intended.) a much-too-Massive magnet has been used, in the switch. (the magnetic switch Should NOT cause a Perceptible 'load' at the Perimeter of the rotor; Any Load/drag here has Maximum Breaking effect. duh.) the presence of the Moving Mass in the switch, will Lower the rotation rate at which float will begin to occur. a v2 might include the use of a tiny magnet for the switch. the travel of the switch-magnet can kept 'small', WHEN the magnet is Not mounted AT the contact point. at higher speeds, six switches/rpm is TOO many, for this motor. cheers googletranslate
Many thanks for the detailed theory! I read with pleasure all your comments. You are absolutely right in everything. But the fact is that in my videos there is no goal to achieve a perfect device, the goal of the channel is to show the model, any physical effect. On RUclips, there are two types of channels: for the soul and for money. My channel for money. But I try to do within my time and my possibilities so that it does not work out very badly. The only true your remark about the poor alignment. It often happens in my engines, I know it and I am very worried. Because it is noticeable in the video and it slows down the rotation. I even wrote this at the end of this video - ruclips.net/video/BwtwxSMwgjM/видео.htmlm55s In this electric motor, I needed to simply wrap thick paper with glue on the axle and bring the diameter to the required size for insertion into the nut. Then the centering of the rotor would be close to perfect. Moreover, it is easier and faster to do. And I wrote about this in the comments at the top. Thank you again, David!
jeezus. grain, please look up the word 'critique'. learn it and memorize it. the Accurate Observations described in my comments ARE Merely Statements of FACT. they are Not an ATTACK. on the other hand, if you wanted to post a side-bar monologue, you Should have posted your Own dam comment. why. because, the "whys and wherefores" behind your actions are NOT relevant, in This conversation. cheers googletranslate
Блин, как приятно и полезно было посмотреть этот видос!!! Ну прям как в поговорке -" дорога ложка к обеду!!!!!! Второй год собирался сделать типа такого движка для вентиляции , вернее для обогрева, а ещё вернее тепловая завеса двери - сверху вниз "
У меня правда уже давно стоят промышленные , но они не сильно, но нудновато гудят , обороты и мощность соответственно сбрасываю кондёрами (кстати, в доме теперь пол тёплый реально, даже возле самой двери в сени. вроде еле дует а вот поди ж ты бля - мож кому пригодиться)) ) Короче. замыслил сделать "поширше" поток, да потише но , но много но. Шире крыльчатка , мощность давишь и шиш. Хотя и провода и магниты с Али уже пришли давно, но не срасталось в башке!
И вот такой подарок!!! Наглядно , просто. прям в десятку!!!))) Подтвердил все мои "диванные" мысли, сомнения рассеял!!!. Класс! Лайк и спасибо! Уже встал с дивана!!!))))))
Рад что пригодилось!
Спасибо! (ещё раз) Но извиняюсь - я рад больше!!!)))
Wow! Good project
um salve do Brasil + like. um motor simples e bem inteligente. muito bom. parabéns.
oo nice amazig
Thanks for sharing very good
I advise you, instead of a wooden sleeve for the axis, to make turns of thick paper with glue on the axis. It is easier and faster and the main centering of the rotor will be better. I made an uneven wooden sleeve and therefore the rotor vibrates, makes a strong sound and slows down the speed.
And yet: the number of magnets is not necessarily 6, you can make any number of magnets from 3 to ... The main thing is that the magnets are located with the same poles to the coil.
Hi
Спасибо, но я ничего не изобретаю, просто демонстрирую законы физики. БТГ - это энергия из ничего? Это противоречит законам физики.
Что ваш Серл, что Капанадзе - это всё из одной серии - фейки, чтобы привлечь внимание. Лучше учите физику - ru.wikipedia.org/wiki/Закон_сохранения_энергии
Ваши умники поломали законы физики? :)
Good
U r amazing in the sound effects in ur videos
Thank you!
@@grain-diose your welcome😉
Great video. What diameter does the axel have? Thank you.
I don't remember the diameter, it was a long time ago, 4-5 mm. Thank you.
Hello, thank for for video.
4:26, please describe, what was wrong, why motor didn't rotate constantly, and how was it fixed ?
Good question! The motor requires careful adjustment of the switching contacts. I think that in each case it will be different, so it makes no sense to tell. It all depends on the thickness and length of the switching wires, on the strength of the rotor magnets, on the magnet strength on the switch as well as on the distance between the magnets, on the voltage, coil parameters, coil location, friction force and more.
Yes, the magnets in the switch repel. I thought it was clear and did not write. Yes, it was necessary to move a little slower at 3:30 in order to be well understood.
Nice project...what is the importance of yhe bolt used as an electromagnet core??
Thank you! Without an iron core, the electromagnet is not very effective. I made a motor without cores, it rotated very weakly and took a very large current, the coils were very hot - ruclips.net/video/BpvCH01ITGA/видео.html
love the music...😁😁
Medium Rock, audionautix.com/
Does the electromagnetic core repel as well? I’ve built one and can’t get the rotor to turn on it’s own.
It is not so easy without experience. The main conditions are the minimum friction in all joints and the accuracy of performance. Also need good batteries with high current, it is alkaline or rechargeable batteries.
Wonderful
Vert good job . and can you make microamps motor magnet pls thank you bro...
🌟
I have a question. What was wrong at the time of the video 4m:13s? I have been trying to replicate this experience but it is like in this case, it does not continue to move. The diameter of the axel is important? Thank you.
It's a fake video, that's why.
Sir can we use another such magnet on the place of electromagnet
No, a permanent magnet will not work instead of an electromagnet. Do you want to make a perpetual motion machine? :) This is contrary to the laws of physics.
4:26 Show us the full video.....
Wow. Like!
Plz plz plz tell me what material u used to make this all the things leaving wood,magnet and nut plz tell im waiting for your reply...
I pointed out everything in the video. The wire in the coil is 0.4 mm.
btw, it is easy to convert an inexpensive screwdriver into a steel shaft or axle. shimming an axle/shaft with tape, ca, etc, in order to achieve a friction fit in a bearing can work reasonably well. it is possible to salvage miniature precision bearings from most 'dead' rc cars and helis. cheers
Thank you, but I am making it cheaper: I use electrodes for welding of different caliber. :) They are completely smooth and satisfy my goals.
yes. and its JUST you and me. i do enjoy these 'private' conversations. don't yu. cheers
What is perpetual motion machine
This is what does not exist. Because there is a Law of conservation of energy.
Hey plzz help ..u had a circuit diagram of the electromagnetic xar .give provide it to me plzzz .....u removed the vid
What kind of video are you talking about? Tell me, I will give the circuit, I do not understand what is electromagnetic xar.
Can u name every piece in detail
Если прерыватель подстроить смещением относительно ротора. Эффективность может повысится.
В этом и заключалась бОльшая часть настройки + контакты ближе/дальше. Можно заметить, что в рабочем варианте контактный магнит чуть ниже - провод, что его держит, чуть согнут. А в начале был ровный. Устанавливал изначально на одной линии: пуск. магнит - ось - катушка. Но для эффективности нужно смещать, очевидно, играет роль время отклонения магнита. Причем, направление смещения, очевидно зависит от направления вращения ротора. Не проверял, но думаю это так.
Аналогия с углом опережения зажигания в двигателе внутреннего сгорания. Рано плохо, поздно тоже плохо. Ещё и зависимость от частоты вращения. Быстрее крутится, раньше нужно "искру".
try brushless true dc motor, even simpler, than brushed any motor
just tilt the coil 90 degrees so the dc magnetic field is perpendicular to the coil wires
scale it up!
make a bike
Yeaaaaaah \o/\o/\o/
hey, help me, I'm still under the wind, you're above the clouds,
Mice vide
Ты гени давинчи
thanks for posting. mediocre work. precision is low, in this iteration. here are some things to consider. HARDENED steel should NOT be used for the core of a solenoid coil. a hard steel core will Soon become Permanently magnetized. as a core, a few common nails Should be used; or other suitable ferrous or mild steel object. the use of a 'normally-closed' switch design results in low energy Efficiency; and it does Not accommodate tuning the motor's performance, by varying the duration of the 'coil ON' period. above a certain speed, such a switch tends to be in a 'floating' state; where contacting is chaotic, Not controlled (as intended.) a much-too-Massive magnet has been used, in the switch. (the magnetic switch Should NOT cause a Perceptible 'load' at the Perimeter of the rotor; Any Load/drag here has Maximum Breaking effect. duh.) the presence of the Moving Mass in the switch, will Lower the rotation rate at which float will begin to occur. a v2 might include the use of a tiny magnet for the switch. the travel of the switch-magnet can kept 'small', WHEN the magnet is Not mounted AT the contact point. at higher speeds, six switches/rpm is TOO many, for this motor. cheers googletranslate
Many thanks for the detailed theory! I read with pleasure all your comments. You are absolutely right in everything. But
the fact is that in my videos there is no goal to achieve a perfect device, the goal of the channel is to show the model, any physical effect. On RUclips, there are two types of channels: for the soul and for money. My channel for money. But I try to do within my time and my possibilities so that it does not work out very badly.
The only true your remark about the poor alignment. It often happens in my engines, I know it and I am very worried. Because it is noticeable in the video and it slows down the rotation. I even wrote this at the end of this video - ruclips.net/video/BwtwxSMwgjM/видео.htmlm55s
In this electric motor, I needed to simply wrap thick paper with glue on the axle and bring the diameter to the required size for insertion into the nut. Then the centering of the rotor would be close to perfect. Moreover, it is easier and faster to do. And I wrote about this in the comments at the top.
Thank you again, David!
jeezus. grain, please look up the word 'critique'. learn it and memorize it. the Accurate Observations described in my comments ARE Merely Statements of FACT. they are Not an ATTACK. on the other hand, if you wanted to post a side-bar monologue, you Should have posted your Own dam comment. why. because, the "whys and wherefores" behind your actions are NOT relevant, in This conversation. cheers googletranslate
I know this is not an attack and I am grateful for your criticism.
@@daviddavids2884i know this dude is beta in person
Bekaar he