2.4 Laser Interferometer || Construction and Working of Laser Interferometer
HTML-код
- Опубликовано: 3 окт 2024
- Laser interferometer can be used for measurements of small diameters as well as large displacements.
Working--
--Laser light first falls on the semi-reflector 'P', is partially reflected by 90°, and falls on the other reflector 'S'.
--A portion of the light passes through 'P' and strikes the corner cube. Light is turned through 180° by the corner cube and recombines at the semi reflector 'S'.
--If the difference between these two paths of light (PQRS − PS) is an odd number of half wavelengths, then interference will occur at S and the diode output will be at a minimum.
--On the other hand, if the path difference is an even number of half wavelengths, then the photodiodes will register maximum output.
--Each time, the moving slide is displaced by a quarter wavelength, the path difference (i.e., PQRS − PS) becomes half a wavelength and the output from the photodiode also changes from maximum to minimum or vice versa.
#laser #Interferometer #interferometry #laser_Interferometer
Link for Metrology Videos playlist
• 2.1 Inteferometry || T...
Pathan Oumer Khan Aziz Khan
Roll No 41
Munde Rahul Bhaskar
Roll no 27
Vijaykumar jagtap roll no36
Suryawanshi Avinash
08
Barude shubham
25
PAWAR AISHWARYA SHRIKISHAN
ROLL NO:-11
Roll no 20
NAME: SHAIKH LATIF LAYAK
ROLL NO: 19
Roll no 35
Aditya Baliram Dhage
09
Tijo Roll No 1000
shrinivas Eknath Panchal
Roll no:05
Kadam Neha Rajabhau
Roll No :32
Arvind Vijayanand Baladhye
Roll no 34