LattePanda Sigma with RTX 3060 [Oculink SFF-8612]

LattePanda Sigma is one of the powerful SBC(single board computer) running Windows 10, 11, and Linux. This pocket-sized computer features an Intel Core i5-1340p processor and 16GB of dual-channel LPDDR5-6400 RAM that you can find in many laptops.
In this video, I build eGPU using a RTX 3060 and tested out how it performs with LatterPanda Sigma.
LattePanda Sigma eGPU test with ADT-Link K43SG: • LattePanda Sigma with ...
About PCIe Scaling/Performance: www.techpowerup.com/review/nv...
00:00 - Intro
00:21 - Specs
00:31 - What's in the box
01:01 - Interface
01:39 - GPIO
02:16 - eGPU buid
04:07 - Benchmark
#LattePanda #1340p #rtx3060 #egpu

[@ypesh]

excellent video!!! loving the music! and style

[@WHODIDI]

Thanks for watching!

[@2000jalebi]

Hello. Nice Video! Why not install the eGPU on the PCIE 4.0 M.2 Slot as opposed to the 4.0? Makes alot more sense to me.

[@WHODIDI]

That's becasue Oculink adopter I used supports only PCIe gen2 and gen3. I tried it out at PCIe gen4 slot but it did not work as expected.

[@RaminAssadollahi]

Second question: Could I also use Oculink SFF-8612 SFF-8611 to PCIE PCI-Express 16x 4X Adapter with SATA Power Port instead of ATX 24 pin power connection? Since the GPU will have its own power cables anyway. The SATA power is specified for 12V 2A.

[@WHODIDI]

SATA Power cable is not compatible. Oculink board has only 24 pin input.

[@RaminAssadollahi]

I found a different board that has SATA instead of 24 pin. I'm asking about power draw.

[@WHODIDI]

I don’t know how much power mine draws. It did not comes with the spec sheet.

[@JazzTechie]

Mine is a bit OP, but running a 4060 Ti. Steam runs awesome with this setup.

[@WHODIDI]

👍👍👍

[@RaminAssadollahi]

When I use the SFX 450W power supply, can I also draw the power from that to power the LattePanda as well? Using some sort of adapter cable, maybe? I'd hate to have two power supplies with two wall plugs...

[@WHODIDI]

LattePanda sigma has JST PH2.0-8Pin Input for the powering option but I am not sure if there is an adopter/cable you can directly connect to PSU.

[@RaminAssadollahi]

Is the pinout of the JST cable standardised? Or documented by LattePanda? What voltages are needed?

[@WHODIDI]

@@RaminAssadollahi You can find more details at : docs.lattepanda.com/content/sigma_edition/Powering_On/#:~:text=Powered%20by%20USB%20Type%20C%20PD%20adapter,-Note&text=LattePanda%20Sigma%20has%20two%20Type,port%20will%20be%20used%20first.

[@MythicalBoy_MC]

Oh so this is it

[@WHODIDI]

👍

[@Moddedby]

I built one with a rtx a2000

[@WHODIDI]

A2000! 👍

[@ejariza9839]

I want one 🥺🥺🥺

[@WHODIDI]

😄