dude, you are definition of awesomeness... you are my idol man.. this video is just what i needed to back up my argument for the relation between acoustics and form for my thesis!!
Thanks a lot for sharing all the knowledge, it´s so much fun following the video while doing it. I found that by connecting the "B" multiplication slider that goes before evaluate lenght as a T parameter to the gradient works as well to colour the points.
Love the tutorial on this! I've been working on my dissertation which involves cymatics and how forms can be affected by it. In the case of pachyderm, it seems to simulate the opposite yeah? Sound behaving acc to geometries. I was wondering if you could suggest how we can achieve the former? forms reacting to sound?
This tutorial is awesome! how can I set the different materials that i'm working with in my simmulation? For example, if I have a wood, glass or a metal panel and I want to know how is the sound in each case.
You'd need to change it in Rhino (it's layer based if I remember correctly). Make sure that you check out other AAHN15 2021 series videos - I've most likely covered it in a earlier video.
Hey Vector Star is not appearing for me, Pufferfish is and many other components as well but Vector Star. I have checked the plug in folder and it seems like it is not there anymore. Could anyone help?
@@DesignGoBrr if I have a track of Beethoven - moonlight sonata for example. and I want to simulate this music on grasshopper. or import this music as mp3 into grasshopper then simulate the movement of sound inside a room according to this music. how can I do that? thanks in advance :)
@@MohamedAli-iu9no Oh, and what kind of output are you looking for? If you look at the particle movement it's just going to be complete chaos. Even with this example here, which is basically a 1 milisecond beep it becomes chaotic immediately as it hits the wall, so with a music track it would just be a complete mess. There is no way to translate between senses. An example would be - how would you do a visual simulation of smell? Sure, you can do movement analysis of fluid dynamics, but it doesn't tell you anything about smell, it just shows you where it's going. Same thing with a short beep vs a nice song.
Hi！ Quite a nice video! A small question is I have no idea that why each point of my point cloud is not a 'point' but a 'crisscross'， which looks very strange. Do you know how can I adjust them into general points? Thank you very much!
Thanks! Cross is just a preview setting - you can either use PointCloud node to show the points as balls (i did it in this video) or you can change the point display setting in the Grasshopper menu (in the top, above the component menus where you have File, Display, Help and so on)
Gediminas Kirdeikis, could you please send the gha definition. I cant fix the problem with the Polygon Scene. I did as you suggested - change material and layer, but it still complains
Hi there, make sure that your geometry is series of closed polysurfaces. It will complain if you give it open geometry as it will not know what's outside and what's inside.
Hello !! thanks for this video. I have a question. after running the calculation more than once, with the same parameters, it gave me different results. I would like to know if there is a way to narrow down the spectrum of possible outcomes. Thank you.
You need mooore resolution then. The global tolerances of the document will influence the output (it should change by a very low margin though.. I mean
Oh.. uf... I'm not sure if that's necessary. There are soooooooo many of them. Maybe I'll do a video on davinci resolve as it's basically a free version of premiere.
I am having an issue at the "evaluate" step (25:00), My points do not disappear like yours they stay stuck on the walls... I can't find what I am doing wrong... Thank you in advance
Make sure that the display of all components is disabled except for the point cloud. Might be that you're simply previewing something that shouldn't be previewed.
This is a good lesson . But I get some difference result when I follow the tutorial . Can you sent me the files that I can check where I do the wrong way in the gh or rhino？
Oh yea, there are plenty of components that give you actual quantitative data, such as T30 Reverberation time (Echo). It's just that - numbers are boring, I prefer visual stuff, so I didn't show that part.
@@DesignGoBrr same mate, but the jurors need a little more convinving 🤣🤣🤣 i tried poking a little here and there, but analysis components require energy time curve data which I'm not familiar with how to put there...
Hmm haven't seen that error. Try asking the creators of Pachyderm in food4rhino plugin comments section, usually this kind of technical troubleshooting is solved there.
Thanks for the great tutorial, but Ive used it for a project, but now that the design is almost completed I am stuck with 2 problems, 1) The design seems to be too big to be selected as a whole but I am not sure how to get around this. 2) The point seems to only work when it is very close to the brep, or else the visualise pachyderm rays would have the error 1. Solution exception:Index was outside the bounds of the array. It would be great if someone could help me solve this, thank you
you are a flippin legend man, THANK YOU!!! need more chillax teachers like you
haha, thank you :D
this is one of the most entertaining tutorials I've ever seen
dude, you are definition of awesomeness... you are my idol man.. this video is just what i needed to back up my argument for the relation between acoustics and form for my thesis!!
Haha, glad it was helpful!
Wonderful show! Been following along for a few months now, all the best!
Awesome, thank you!
good definition! Thank you for explaining Pachyderm plug-in.
Happy to help!
I want to thank you for all the knowledge that you share with us
please can you use draw icons in grasshopper and use bifocals or sunglasses
My pleasure :)
Thanks a lot for sharing all the knowledge, it´s so much fun following the video while doing it.
I found that by connecting the "B" multiplication slider that goes before evaluate lenght as a T parameter to the gradient works as well to colour the points.
Yup, that would work as well, good observation!
You are a life saver, sir! Thank you! I laughed at the "'Da Vinci' as in the guy, and 'resolve' as in resolve" 00:37:56
The wink-y and revolve with a s instead of a v
what a amazing video, i had such a hard time finding something about analysis , thank u my dude
Glad I could help!
this tutorial saved my live (not literally) but thanks a lot!
Would be strange if it did it literally. First question I'd ask - what kind of professors does this guy have?
Love the tutorial on this! I've been working on my dissertation which involves cymatics and how forms can be affected by it. In the case of pachyderm, it seems to simulate the opposite yeah? Sound behaving acc to geometries. I was wondering if you could suggest how we can achieve the former? forms reacting to sound?
Thank you! I really enjoy this and the way you did this tutorial is truly amazing.
Glad you enjoyed it! More stuff like this will come soon!~
Thanks for sharing your knowledge !
My pleasure!
This tutorial is awesome! how can I set the different materials that i'm working with in my simmulation? For example, if I have a wood, glass or a metal panel and I want to know how is the sound in each case.
You'd need to change it in Rhino (it's layer based if I remember correctly). Make sure that you check out other AAHN15 2021 series videos - I've most likely covered it in a earlier video.
Love ur video! Can there be more than 1 sound source emitted at a time?
I believe there can indeed be more than 1 source - but you would get super chaotic calculations, so I'm not sure if it's a good idea.
Thanks!
Thank you for the great tutorial. Can you share the Rhino file. I'm finding a difficulty creating the hollow box and the panels.
many thanks, great tutorial.
Glad it was helpful!
WOW this is so interesting!
Glad you think so!
Hey Vector Star is not appearing for me, Pufferfish is and many other components as well but Vector Star. I have checked the plug in folder and it seems like it is not there anymore. Could anyone help?
That’s great. I want to ask, how to simulate music as this video.
I don't really understand the question - could you elaborate on it?
@@DesignGoBrr if I have a track of Beethoven - moonlight sonata for example. and I want to simulate this music on grasshopper. or import this music as mp3 into grasshopper then simulate the movement of sound inside a room according to this music. how can I do that?
thanks in advance :)
@@MohamedAli-iu9no Oh, and what kind of output are you looking for? If you look at the particle movement it's just going to be complete chaos. Even with this example here, which is basically a 1 milisecond beep it becomes chaotic immediately as it hits the wall, so with a music track it would just be a complete mess. There is no way to translate between senses. An example would be - how would you do a visual simulation of smell? Sure, you can do movement analysis of fluid dynamics, but it doesn't tell you anything about smell, it just shows you where it's going. Same thing with a short beep vs a nice song.
thank you.....thank you, great tutorial.
Glad it was helpful!
Hi！ Quite a nice video! A small question is I have no idea that why each point of my point cloud is not a 'point' but a 'crisscross'， which looks very strange. Do you know how can I adjust them into general points? Thank you very much!
Thanks! Cross is just a preview setting - you can either use PointCloud node to show the points as balls (i did it in this video) or you can change the point display setting in the Grasshopper menu (in the top, above the component menus where you have File, Display, Help and so on)
@@DesignGoBrr Ohhhh I see that！Thank you!
I'm glad it is not just me that has no clue what VG does!
Yup, sometimes you just have to plug in "1" and hope for the best
Gediminas Kirdeikis, could you please send the gha definition. I cant fix the problem with the Polygon Scene. I did as you suggested - change material and layer, but it still complains
Hi there, make sure that your geometry is series of closed polysurfaces. It will complain if you give it open geometry as it will not know what's outside and what's inside.
@@DesignGoBrr,Thank you very much for the advice, I just restarted the program and everything worked
Hello !! thanks for this video. I have a question. after running the calculation more than once, with the same parameters, it gave me different results. I would like to know if there is a way to narrow down the spectrum of possible outcomes. Thank you.
You need mooore resolution then. The global tolerances of the document will influence the output (it should change by a very low margin though.. I mean
is the box/panels that models the room on your patreon?
Yup, they are there
How are your points showing as spheres and not x? did u assign geoetry to the points? I cant figure it out.
I used the point cloud node. It's great for showing a large amount of points
Thank you
Welcome!
@@DesignGoBrr Do you know how to use pachyderm for real time auralisations?
A tutorial for premier maybe? :)
Oh.. uf... I'm not sure if that's necessary. There are soooooooo many of them. Maybe I'll do a video on davinci resolve as it's basically a free version of premiere.
I am having an issue at the "evaluate" step (25:00), My points do not disappear like yours they stay stuck on the walls... I can't find what I am doing wrong... Thank you in advance
Make sure that the display of all components is disabled except for the point cloud. Might be that you're simply previewing something that shouldn't be previewed.
@@DesignGoBrr I disabled the display of every components except Evaluate but nothing change 😅
thanks for the good lecture! When I adjust the second multiplication value in multiplication, a sound should come and go, but I do not disappear. Why?
This is a good lesson . But I get some difference result when I follow the tutorial . Can you sent me the files that I can check where I do the wrong way in the gh or rhino？
is there a component in pachyderm for this simulation's quantitative analysis to determine if the space is good or bad for acoustics in general...
Oh yea, there are plenty of components that give you actual quantitative data, such as T30 Reverberation time (Echo). It's just that - numbers are boring, I prefer visual stuff, so I didn't show that part.
@@DesignGoBrr same mate, but the jurors need a little more convinving 🤣🤣🤣 i tried poking a little here and there, but analysis components require energy time curve data which I'm not familiar with how to put there...
@@sulaman_k4375 Check out this playlist here: vimeo.com/247776786
@@DesignGoBrr god send my man.. this should def help me... thanks again 👌👍
My particles have no point shape, they have "x", how can that be solved?
It's just a visual thing. You can use the point cloud node to make the points look nice
the polygon scene component is giving me some "sourcefilenotfound" errors. cant go further than that.. anybody got this issue? i have rhino 7
Hmm haven't seen that error. Try asking the creators of Pachyderm in food4rhino plugin comments section, usually this kind of technical troubleshooting is solved there.
have you found a solution for it yet?
@@jonashefel9799 works fine on older version.. i tried it on rhino 6.5..
thank you!
hello,
the poly scene and nurbs scene keeps showing red light and i tried fixing it from rhino but it didn't work,what can i do?
Lov ur video, but help pls :'( I cannot see the colors of the gradient, when i put the cloud display nothing happens haha helppp
Thanks for the great tutorial, but Ive used it for a project, but now that the design is almost completed I am stuck with 2 problems,
1) The design seems to be too big to be selected as a whole but I am not sure how to get around this.
2) The point seems to only work when it is very close to the brep, or else the visualise pachyderm rays would have the error 1. Solution exception:Index was outside the bounds of the array.
It would be great if someone could help me solve this, thank you
you are the best
Good
do we need panels if we want to calculate acoustics in an angular space?
Nope, panels don't have anything to do with simulation/calculation. They just help with the accoustic performance of the space
how tf i get these hollow box geometry?
waow