How to Replace Mirrors 99-04 Ford F250 Super Duty
HTML-код
- Опубликовано: 8 сен 2024
- Buy Now!
New Mirror from 1AAuto.com 1aau.to/ia/TRMR...
In this video, 1A Auto shows you how to repair, install, fix, change or replace a broken, smashed, cracked, or shattered rear side view mirror. This video is applicable to the Ford Super Duty F250, F350 and F450, years 99, 00, 01, 02, 03, 04, 05, 06, and 07.
This process should be similar on the following vehicles:
1999 Ford F250 Super Duty Truck
2000 Ford F250 Super Duty Truck
2001 Ford F250 Super Duty Truck
2002 Ford F250 Super Duty Truck
2003 Ford F250 Super Duty Truck
2004 Ford F250 Super Duty Truck
2005 Ford F250 Super Duty Truck
2006 Ford F250 Super Duty Truck
2007 Ford F250 Super Duty Truck
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaaY/1A...
• 8mm Wrench 1aau.to/ocp/1AX...
• 11mm Socket 1aau.to/oXt/1AX...
• 7mm Socket 1aau.to/oQ4/1AX...
• Ratchet 1aau.to/oacs/1A...
• Socket Extensions 1aau.to/oXt/1AX...
Subscribe: / @1aauto
Check out our playlist:
Ford Auto Repair Videos: • Ford Auto Repair Videos
How to Replace Mirrors with Parts from 1AAuto.com: • How to Replace Mirrors...
Ford Super Duty F250/F350 1999-2007: • Ford Super Duty F250/F...
For More Info visit us at 1aau.to/h/a3R/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
My wiring harness was zip tied in behind the speaker...had to remove speaker to find it. Was not on the outside of interior door as shown on video. Can also tie a string to the wires so you pull a string through as you remove old wiring. then tie the new harness on the string and pull your new harness back through.
You guys have great videos! Helpful, brief, and perfect for regular guys looking to repair their own stuff. THANK YOU!
+Mike Cowland Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/Mirrors/Ford/F250-Truck/1AMRP00591?RUclips&CTA+Comment&LOwd0g2G8
If you have Manual Mirrors on your Ford Super Duty Truck you do not need to remove the door panel. You only need to remove the small upper panel to expose two of the mounting nuts.
Good video, did the job in 45 minutes, did loose a nut in the door but the replacement came with new ones so I did not chase it out. Thank you for such a clear video.
Thank you for showing me the way to put towing mirrors onto my 2003 F-250 6.0l.
I luckily had the wiring all wired up for the heating and blinkers, etc. That was the headache I wasn't looking forward to. I am super stoked that I got it all done in about 1.5 hours. Much appreciated! I am happy with my purchase, but now I just hope the glass mirrors don't rattle like a few ratings suggested. I chose the look that you put on, but not OEM, I don't think. Was about $149 for the set on Amazon with the best ratings out of all the mirrors that would fit. I used the old rubber seal because the new ones were very thin, cheap foam. Thanks again!
Thanks. Job took all of 20 minutes. Magnetic socket is helpful. 1a auto had the best price for replacement mirror.
+George Haas Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
Have a 2005 F350 Super Duty Lariat. Replaced passenger side tow mirror this morning. Ordered Trailridge mirror from 1A Auto. Packaged well and exact match. Used this video to replace. Went great. Thank You!!!
Disconnecting the battery to do this job is completely unnecessary, but I appreciate this video as it helped me figure out how to get to the mirror harness to unplug it.
I’m not really good at making repair, but had no issue. I was shocked I did not drop the nut in the door. Just tilt the racket handle downward to hold the nut and pretend it is a game of operation. I used a hook to pull the cable through for the mirror connection (fat hands). I would suggest lowering the window first before unhooking the battery. It makes handling the mirror much easier. I had a duh moment.
+Jay Stribling but you made it through and we recognize that. Great job tackling your own installation!
Great video. My 1999 F250 required I remove the speaker to connect the power cord but it was easy. I know I would have screwed it up had I not watched the video.
I had to remove the speaker also to get to my mirror connector. I have a 2000 F-250 Super Duty Crew Cab. Thanks for the video. Made it a simple job.
Kudos Kristin. The only way to connect the power was to remove the speaker for the 1999 model.
i know it's 11 years later, but fantastic video!!! I HATE working on my '99 F-250 SD and figured there wasn't any way in heck Ford would require taking the whole dang door panel off just to unplug the mirror. Alas, I was wrong. Excellent video, but terrible design by Ford!
Just wanted to say I ordered a RH Mirror for my 06' F350 from you on the 21st of Dec (Saturday) and it was on my truck by 2pm on the 24th! Needless to say I wasn't expecting that. I found this video on here and only then discovered it was from the same place. Merry Christmas to you guys and thanks for the above and beyond service!
Looks easy enough that I will attempt this myself as I need to replace both mirrors on my 04 Super Duty.
Thank you... You made it easy for me to replace my mirror....
To prevent losing a nut from a socket, try using a small piece of paper over the end of the socket to make a tighter fit on the nut.
Thanks very much for sharing the how to for installing the mirror assembly.. It was a big help.. It took me awhile to find the connector for the mirror.. But I am not very bright anyway..
thank you!
Used this video before and used it again 😁
Thank you
When I took off the nuts, I loosened them with my impact and then carefully grabbed them with needle nose pliers. Fortunately I didn't drop one
Dude! Thank you. You just saved me about $150.00!
Thanks for the walkthrough
@finatik5 Thank you for visiting our auto repair channel. Have a great day!
Great Video!! Thank you for sharing!! Saves people a lot of money in repairs!!
+MrAndy5907 Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Worked easy thanks for the great video
I have a 2001 F350 7.3L Crew Cab and mine doesn't have a mirror connector on the door. The wires go from the harness through the hole into the mirror. I took the dust cover off the mirror outside and it then goes into the arm and then into the mirror. PS I found out someone had cut the stock connector off and hard wired it in. Also my connector I found out on the passenger side is round not rectangular. Does anyone know what shapes go with what years? Thanks for the tips 1A Auto, love your videos. Best Wishes & Blessings. Keith Noneya
thanks man
U save my life
+Jesus Ruiz Granados Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/Mirrors/Ford/F250-Truck/1AMRP00591?RUclips&CTA+Comment&LOwd0g2G8
Keep a magnet handy to place alongside the socket extension and the nut will stick to it and not fall in the door.
Most grateful for the video. Made the job very easy.
Better than a Chilton's manual! Thanks for sharing!!!
This is a great video, and I just completed an install of my side mirror. My only problem was that I did not put the window down prior to starting. If you are going to replace one of these heavy mirrors, dont do like me and have to reconnect the harness to open the window mid project.
Excellent video. Thank you for sharing
Thanks saved some headaches.
Glad we could help 1aauto.com 866-403-3393
The steps helped at lot. You said 11 and 17 mm sockets. I needed to use an 11 and 7mm.
@stlouissux9119 You may want to check your fuses to see if any of them are blown.
I have a 2001 f250 with the power mirrors... Question is I don't have the signal or heated mirrors but are power will all the functions of the new mirrors work or just the power?
So I have a 2001 f250 and the previous owner changed the mirrors to the 08 ones can I switch back to the original ones or would I have the change the wiring harness?
So as far as I can see.... for my '02 F350..
For "manual" mirrors, I shouldn't have to take the door panel off...
Is that right?-- or am I missing something...?
Thank you for checking us out. The door panel would still need to be removed in order to gain access to the mounting bolts behind the panel that are attaching the mirror. Hope this helps you out! +calholli
@stlouissux9119 You could test the switch with a test light to see if there's power going to it and from it. That way it would take the switch out of the equation if it was working.
Thanks for he video. BUT! Please add at the start if you have manual mirrors with no heat skip all this except popping off the top panel. Naturally as yours did my reflector broke, as did the clip on the other panel by the switches. Old and brittle. I am a BMW Master Tech so should have had enough sense to not follow all directions step by step.
Thank you, all, and I hope everyone that way's doing well too.
Can a bolt off a mirror be replaced? I have one snapped off
Thanks for the video! It really helped.
I was wondering why the whole panel was being taken off lol. So for just the standard mirror (non electrical components) all I need to do is remove the little tabs and unbolt the mirror correct?
I have a winged nut between those first two 11mm bolts does that need to come off my mirror isn’t coming off with all the 11mm bolts off.
Replacing mirrors that are not electric, no need to take door apart just behind the mirror?
Is there a way to test your switch? I have a lariat 99 f250 and my mirrors have never been power. I have never known why they don't work I haven't really looked into it. I have the switch for auto mirrors. I want to upgrade to automatic superduty mirrors but I don't want to buy them if they're not going to work.
It really depends on how your truck is wired, we have had customers buy the updated 08+ style mirrors made for the pre 08 trucks. Some of those customers did have the directional, power and puddle light work with the new tow mirror. If you have the dealer run the VIN number for you, they may be able to tell you if the wiring is there on your truck, so that the added features would work. Hope this helps you out. 1aauto.com 888-844-3393
@1aauto The mirror fuse (4 under the drivers wheel) is not blown. I checked my connection to the switch and it is connected. They are power mirrors i'm trying to figure out why neither one works. Is there a way to test the switch? Sounds like it may have gone bad unless there is a relay somewhere but I don't believe there is.
How do I get to the glass on my 2007 f150 side view mirror so that I may replace it
We recommend matching the functions that your mirror currently has with the functions of the new mirror that you're looking at. 1aauto.com 888-844-3393
This doesn't work for the passengers side
We do carry some of the replacement glass on our website. We also carry new mirrors. 1aauto.com 888-844-3393
I'm just asking cause that's how your plug is set up and advertised the features for the later years.. I'm looking at the updated 06 ones. And the discretion says power, defrost and single. That's why I ask. You don't have just power....
if i have manual mirrors, do i have to remove the whole door panel?
+Paper Towels If your vehicle has manual mirrors, and a triangular sail panel held on by clips, you will not have to remove the door panel. This step is just to reach the end of the electrical connector. 1aauto.com
I bought a set of used mirrors recently for my 2002 F350. Does anybody know where I can buy a new set of the mirror pads/gaskets? I can't seem to find them anywhere.
You might be able to get them from the dealer. 1aauto.com 888-844-3393
I have and 2003 f250 with the car mirrors and i hate them there power what do i need to put tow mirrors on it becasue dealer said id need a different harness and all i want is power mirrors not the turn or heated ones. Do you guys offer them?
HI Logan, Here's a link to a set of tow mirrors on our website for your truck. They are power only, and come with the correct wiring so that you do not need to cut any wires, they would plug right in for you. Hope this helps you out. www.1aauto.com/ford-mirror-pair/i/1amrp00610?f=844913&y=2003&RUclips&RUclips&ATony
1A Auto Parts
that link is to manual mirrors power out im just looking for power adjustable mirrior manual out no light or heat. btw thanks for the reply i found a set today thanks
Logan Adams Those mirrors manually extend and power adjust. It will list this in the product description.
At 2:37 I don't have that plug...
Do you sell the adaptor harness to run 2008 mirrors on a 2005?
Thank you for watching! Please call our sales staff they will be able to assist you . The number is 888-844-3393 thanks!
1aauto.com
You don’t even have to take off the whole door panel
+Landon Burba Thanks for the tip!
C
Thank You
+Clark Hays Thank you for your feedback!