What year/model and trim is your truck? I have a 2001 f250 lariat and I don't think they offered turn signals or heated mirrors so I doubt the original wiring is there for them.
I got a pair of aftermarket mirrors that are out a little bit and the top half wobble badly. 6:04 guaranteed I bet thats why. Different manufacturer but I bet same problem. Gonna check it out day after tomorrow (I work all day tomorrow) and come back with an update. Thanks for the video.
Anyone in CA (Commiefornia) (not sure about other states) note that the YTer here inadvertently has the mirror lights wired incorrectly in that the top sections should be the turn signals and the bottom sections the marker lights. I happened to be looking up CA code for turn signal color (can be white or amber in the front, red or amber in the rear) and found that turn signal lights on mirrors can not project toward the front of the vehicle. I was wondering why the mirrors I bought (similar to the upgraded ones you put on) have the upper light section internally blocked off toward the front to block the light and this reg explains it. VEHICLE CODE - VEH DIVISION 12. EQUIPMENT OF VEHICLES [24000 - 28160] ( Division 12 enacted by Stats. 1959, Ch. 3. ) CHAPTER 2. Lighting Equipment [24250 - 26106] ( Chapter 2 enacted by Stats. 1959, Ch. 3. ) ARTICLE 5. Signal Lamps and Devices [24950 - 24953] ( Article 5 enacted by Stats. 1959, Ch. 3. )
24953. (d) In addition to any required or authorized turn signal lamps, any vehicle may be equipped with supplemental rear turn signal lamps that are mounted on, or are an integral portion of, the outside rearview mirrors, so long as the lamps flash simultaneously with the rear turn signal lamps, the light emitted from the lamps is projected only to the rear of the vehicle and is not visible to the driver under normal operating conditions, except for a visual indicator designed to allow monitoring of lamp operation, and the lamps do not project a glaring light. (Amended by Stats. 1997, Ch. 945, Sec. 22. Effective January 1, 1998.) May be never noticed by the cops, but why not eliminate the possibility.
O have 2020 F250XL that does not have folding nor extending tow mirrors which I need. I'm trying to find out what tow mirror modules I need to convert my basic tow mirrors to an extendable and folding tow mirror. If anyone knows how I can get those features, please advise. Enjoyed a full-watch of your video. 👍🏽🙂
Great info and install. Did your truck have heated mirrors prior to the install and you just upgraded for looks or did the upgrade add the heated mirrors?
did you have turn signals in your mirrors from the factory? If I tear mine apart will I be happy to find out I have power for lights in that harness too?
hey bro how are the mirrors holding up? and hows the quality? some mirrors look like funny house mirrors with lots of distortions. I wanna get your feedback on these. I am planning to upgrade my mirrors as well. thanks!
I just bought these, but my harness only has 3 wires. I don't see how it could be plug and play. How many wires were on the truck side of your harness for it to work without splicing additional wires in for the blinkers and heater?
How did you get the running lights to work? I have the same plug and play. But those extra two pieces on the adapters is one for the day time running lights?
If the truck didnt come with lights, wiring will be different and the adapter will have to be used but running lights will have to be wired from light switch
Yo boss was wondering if you don’t need your other mirrors if you would think about selling them to me. I’m in need of new mirrors but i have basic model with no lights or anything.
My main question is do the main mirror lenses shake or shutter going down the road? I bought a set of OE replacement mirrors for my 02 and the lenses shake badly. The mirror bodies and such are great, but the shaking sucks!
Why can’t any of these videos show us what the whole truck looks like from the front compared to the old ones. Not one video. And width? For us people that have single garage doors.
Yitamotors has reached out and is offer a 5% discount, 33MLW22A
From 7th sep to 8th oct
Fit my 2005 Excursion flawlessly
I got a 2002 F-250. Thanks for everything.
One of the better videos explaining step by step how to do it. You have teaching ability, unlike some of the worthless videos on RUclips
Main thing that helps if you roll the window down, easy access to mirror, easier to take off, easier to put on
I was just saying that too lmao😂😂
Heck of a nice upgrade. Just did mine a couple weeks ago and it was the best thing I have done. Great video.
Did the truck originally come with signal and heated mirrors?
What year/model and trim is your truck?
I have a 2001 f250 lariat and I don't think they offered turn signals or heated mirrors so I doubt the original wiring is there for them.
I got a pair of aftermarket mirrors that are out a little bit and the top half wobble badly. 6:04 guaranteed I bet thats why. Different manufacturer but I bet same problem. Gonna check it out day after tomorrow (I work all day tomorrow) and come back with an update. Thanks for the video.
Nice video. Very helpful. Just ordered the unit, clicked the like button, and subscribed to your channel.
Well done step by step video. Ordering a set now. Thanks!
Anyone in CA (Commiefornia) (not sure about other states) note that the YTer here inadvertently has the mirror lights wired incorrectly in that the top sections should be the turn signals and the bottom sections the marker lights. I happened to be looking up CA code for turn signal color (can be white or amber in the front, red or amber in the rear) and found that turn signal lights on mirrors can not project toward the front of the vehicle. I was wondering why the mirrors I bought (similar to the upgraded ones you put on) have the upper light section internally blocked off toward the front to block the light and this reg explains it.
VEHICLE CODE - VEH
DIVISION 12. EQUIPMENT OF VEHICLES [24000 - 28160] ( Division 12 enacted by Stats. 1959, Ch. 3. )
CHAPTER 2. Lighting Equipment [24250 - 26106] ( Chapter 2 enacted by Stats. 1959, Ch. 3. )
ARTICLE 5. Signal Lamps and Devices [24950 - 24953] ( Article 5 enacted by Stats. 1959, Ch. 3. )
24953. (d) In addition to any required or authorized turn signal lamps, any vehicle may be equipped with supplemental rear turn signal lamps that are mounted on, or are an integral portion of, the outside rearview mirrors, so long as the lamps flash simultaneously with the rear turn signal lamps, the light emitted from the lamps is projected only to the rear of the vehicle and is not visible to the driver under normal operating conditions, except for a visual indicator designed to allow monitoring of lamp operation, and the lamps do not project a glaring light.
(Amended by Stats. 1997, Ch. 945, Sec. 22. Effective January 1, 1998.)
May be never noticed by the cops, but why not eliminate the possibility.
Wait whaaa? Damn I’m in sac
Hey Devon glad to see a video! Been awhile
O have 2020 F250XL that does not have folding nor extending tow mirrors which I need. I'm trying to find out what tow mirror modules I need to convert my basic tow mirrors to an extendable and folding tow mirror. If anyone knows how I can get those features, please advise. Enjoyed a full-watch of your video. 👍🏽🙂
Hey nice video, great info.
How do you turn the heating on?
2008+ models have a dedicated button for it.
Thanks
?????
My factory heated mirrors turn on with the rear defrost.
Yaa I have the same ones and all you did was plug them in. But i have the blinker dots as well in the mirrors idk don’t seem to be working
Sweet thank we have a very similar set up just have a couple other things done
+Beau Steffan I added a video on the wiring I did if you didn't see that
They only work if your truck has the functionality already. If not you have to wire them up.
Great info and install. Did your truck have heated mirrors prior to the install and you just upgraded for looks or did the upgrade add the heated mirrors?
No it didnt
@@DevonXpress how does the heated mirror feature work if you don’t have it already? Looking at doing these on my 99.
Excellent video Bro, they look great.
did you have turn signals in your mirrors from the factory? If I tear mine apart will I be happy to find out I have power for lights in that harness too?
+Nik Halaszi No I had no turns from the factory. I did another video on how I added turn signals and running lights to my truck
Devon Xpress do you have a link to that video? I looked on your video list but couldn’t find any.
hey bro how are the mirrors holding up? and hows the quality? some mirrors look like funny house mirrors with lots of distortions. I wanna get your feedback on these. I am planning to upgrade my mirrors as well. thanks!
I love mine haven't had any issues, I have been getting vibration in the glass but my tires have some flat spots making for a little rough ride
Devon Xpress thanks for the feedback man!
I just bought these, but my harness only has 3 wires. I don't see how it could be plug and play. How many wires were on the truck side of your harness for it to work without splicing additional wires in for the blinkers and heater?
He only had 3 wires also. You have to spice for the heat, running and turn signals
Great video Dev
thank you very much excellent video
I really like that style you save if I can find it for my f-150?
My turn signals on the new mirrors don't work. Do I have to run a wire to the plug in door panel?
I installed a set and turn signals and running lights don’t work
for an 03 superduty do I need to do any additional wiring or splicing to get the turn signals to work? or should it all be plug and play
Eric Baker I think of you have a lariat trim you don’t buy my xlt trim I Do
Will the turn signals and header function work if the trucks original mirrors didn’t have those options? I have a 2000 f250
You'll have to add the switch and wire it
@@DevonXpressWhay switch? Do you have a link?
How did you get the running lights to work? I have the same plug and play. But those extra two pieces on the adapters is one for the day time running lights?
If the truck didnt come with lights, wiring will be different and the adapter will have to be used but running lights will have to be wired from light switch
Just use a 10mm works much better.
Do you know where I can get the orange cover from I had mine a week and one fell off I emailed them no response
If you haven't already, check out the Chat Room: discord.gg/s2Ku5dn
Yo boss was wondering if you don’t need your other mirrors if you would think about selling them to me. I’m in need of new mirrors but i have basic model with no lights or anything.
Joe Prince I’ll sell you mine. I’m going to do this today
Why wont these fit a 2000 excursion but they fit 1999 f250 and up?
I have these mirrors on my 01 excursion and the blinkers dont work and they vibrate like crazy
I regret so much getting this fucking mirrors they are crap!
My main question is do the main mirror lenses shake or shutter going down the road? I bought a set of OE replacement mirrors for my 02 and the lenses shake badly. The mirror bodies and such are great, but the shaking sucks!
So far i have no vibration in the mirror, doesn't shake going down the road
5% discount, 33MLW22A
From 7th sep to 8th oct
How do activate the heat for the mirrors, do you need a switch or do they heat up when you start the truck up?
+Braxton Little you'll need a switch to turn them on when you want to
Did you use a simple toggle 2 prong switch and what amperage?
Coleman Landers
Regular light up switch from parts store 20 amp (yeah i know its overkill), dont forget inline fuse holder with 7.5amp fuse
Could you do a video on showing how to do this. Thanks man
Are they wider extended than oem? Thinking of upgrading my super duty.
+Shawn Blixt I never compared them to the oem that came on it, but never noticed them being much different as how far they extend
5% discount, 33MLW22A
From 7th sep to 8th oct
Why can’t any of these videos show us what the whole truck looks like from the front compared to the old ones. Not one video. And width? For us people that have single garage doors.
I have a gap on the top of mine where I screw it and is that why you cut the plastic in the mirror
Yeah it was bumped out a little, once I cut that it sat flush
Andrew Martin I
@@DevonXpress what do you have to cut out?
We're did you find the mirrors you took off?
The company I got my last mirrors from no longer sell mirrors. But I'm much happier with these. I like having the heat and turn option.
👌🏻 nice
How u get the heat to work?
+Beau Steffan I ran a wire from the plug that's the (gray wire) to a switched power
You should have just opened the window to hold it
I thought the same thing..just put the window down. Lol.
,did you hear the unintentional porn sentence? 4:17 to 4:27
I thought you was selling your truck?
+Brock Davis I haven't yet, thinking I'll hold onto it for awhile
Roll the window down
Be careful the big mirrors vibrate so much!! 😡
FIRST