@@vikavika3468 упала видать цена, я смотрел на момент своего комента. Я себе девольт взял и не пожалел, цена в разы ниже, а станок в сотни раз лучше. Один упор, заставляет пищять от восторга
@@Iiiiiiiitya по точности , все довольны, джеты,методы они не годны для точных работ. Сам не пользовался, но все говорят об этом. Что столы гуляют, имеют не точности и для определенных работ ими пользоваться нормально. Но где нужно чтобы стол не гулял, шины сверх точно по салазкам бегали и тд. То это вот такие пилы как мафель и возможно фестул.
Реально крутая тема, для раскроя вдоль с упором + торцовка с протяжкой + сколов нет(если вкладыш есть) Еще у метабо такое видел. Правда цены, лучше самому сделать на чпу-шнных направлялках и линейных подшипниках
У торцовочных пил другая функция, если потребуется сделать распил или отрезать небольшой кусок длинной конструкции на настольной пиле это сделать не получится. К тому же вылет диска у настольных пил очень маленький.
In Germany and Europe, where ERIKA is much better known than here in the U.S., for what type of work do professionals mainly use such a pull-push saw? Is its use limited primarily to flooring contractors and others who need not make crosscuts on long (3-4 m) materials? Do professionals actually forego deploying a normal compound miter saw on the job in favor of this two-in-one machine? Or is Erika viewed as a multi-talented and versatile improvement on a standard table saw, but nonetheless a companion rather than a replacement? Also, would the answer to this two-in-one sufficiency question be different if asked in regard to amateur/DIY owners vs. professional tradesmen? Is the market for ERIKA primarily found among professionals engaged in specific aspects of construction, or among serious DIY enthusiasts who use it as their primary, or even their only, saw? I am a professional finish carpenter, mostly working solo. The idea of eliminating one more machine (MS) from the on-site inventory is appealing, especially by the substitution of one of ERIKA's quality and unique capabilities, but I'm not sure whether ERIKA would be a viable replacement for a standard miter saw.
Despite what many tradespeople say, it was UK under Margaret Thatcher who pushed EEC/EU to adopt health and safety and human rights. Health and safety was almost unknown in continental Europe. But the demo does show how light, fast, and precise this saw can be, together with demo of how 'industrial' it can be. All over the place in Germany - but their trades are like medieval guild closed shops so prices and margins much higher than drive to the bottom UK. Problem with all demonstrations, computer software or construction is the demonstrator is doing same thing hundreds of times so it's fast and slick. If you're doing many different things and not using that one tool all day every day so you live and breathe it, it becomes much less attractive. The DeWalt table saw must be £ for £ the best site option and wins almost every review - and it can do cabinetry in a shop. Hate their multi-cutter and don't much like their drills and drivers but I may be out of date with those. Mafell plunge saw is worth every penny and, since the kit includes everything, it's not necessarily more expensive than alternatives
этот человек очень рискует держа такую маленькую загатовку
Пила крутая, для небольшой столярки в самый раз!
Стоимость, полагаю заоблачная)))
399к
@@Iiiiiiiitya 300 р вроде на сайте.
@@vikavika3468 упала видать цена, я смотрел на момент своего комента. Я себе девольт взял и не пожалел, цена в разы ниже, а станок в сотни раз лучше. Один упор, заставляет пищять от восторга
@@Iiiiiiiitya по точности , все довольны, джеты,методы они не годны для точных работ. Сам не пользовался, но все говорят об этом. Что столы гуляют, имеют не точности и для определенных работ ими пользоваться нормально. Но где нужно чтобы стол не гулял, шины сверх точно по салазкам бегали и тд. То это вот такие пилы как мафель и возможно фестул.
По точности все Девольты, метабо, джеты, боши и прочее *** Т9 козел) остальной текст вроде не испортил
Реально крутая тема, для раскроя вдоль с упором + торцовка с протяжкой + сколов нет(если вкладыш есть)
Еще у метабо такое видел. Правда цены, лучше самому сделать на чпу-шнных направлялках и линейных подшипниках
У торцовочных пил другая функция, если потребуется сделать распил или отрезать небольшой кусок длинной конструкции на настольной пиле это сделать не получится. К тому же вылет диска у настольных пил очень маленький.
Он ща 399к стоит, голый 😆😆😆
@retools push pull saw can completely replace miter saw, even for long narrow pieces.... as long as you can support long piece
Love the fact that someone on large pieces has to move the extractor hose..
In Germany and Europe, where ERIKA is much better known than here in the U.S., for what type of work do professionals mainly use such a pull-push saw? Is its use limited primarily to flooring contractors and others who need not make crosscuts on long (3-4 m) materials? Do professionals actually forego deploying a normal compound miter saw on the job in favor of this two-in-one machine? Or is Erika viewed as a multi-talented and versatile improvement on a standard table saw, but nonetheless a companion rather than a replacement?
Also, would the answer to this two-in-one sufficiency question be different if asked in regard to amateur/DIY owners vs. professional tradesmen? Is the market for ERIKA primarily found among professionals engaged in specific aspects of construction, or among serious DIY enthusiasts who use it as their primary, or even their only, saw?
I am a professional finish carpenter, mostly working solo. The idea of eliminating one more machine (MS) from the on-site inventory is appealing, especially by the substitution of one of ERIKA's quality and unique capabilities, but I'm not sure whether ERIKA would be a viable replacement for a standard miter saw.
Do you still have all your fingers?🫣
holy shit!! is he trying to show how to lose a finger?
Despite what many tradespeople say, it was UK under Margaret Thatcher who pushed EEC/EU to adopt health and safety and human rights. Health and safety was almost unknown in continental Europe.
But the demo does show how light, fast, and precise this saw can be, together with demo of how 'industrial' it can be. All over the place in Germany - but their trades are like medieval guild closed shops so prices and margins much higher than drive to the bottom UK.
Problem with all demonstrations, computer software or construction is the demonstrator is doing same thing hundreds of times so it's fast and slick. If you're doing many different things and not using that one tool all day every day so you live and breathe it, it becomes much less attractive.
The DeWalt table saw must be £ for £ the best site option and wins almost every review - and it can do cabinetry in a shop. Hate their multi-cutter and don't much like their drills and drivers but I may be out of date with those. Mafell plunge saw is worth every penny and, since the kit includes everything, it's not necessarily more expensive than alternatives
How can I order it to Nigeria
Thumbs down. Never ever get your fingers that close to a blade
It comes with free dude to move dust hose! Sweet! I hear gunfire in the background at 3 minute mark when they shot his helpful comrade.
#Строительный #столярный #инструмент #Mafell #Erika 85 EC настольная #пила
ruclips.net/video/t4m5PD-dIH0/видео.html
Походу 5 это слишком много пальцев. Мне через экран было стрёмно.
為什麼台灣沒賣？！
Теперь хрень такую не купишь с таким курсом евро
Надо зарабатывать , а не экономить.
@@Марошка на мафеле не заработаешь
Johny Baskin теперь точно с таким курсом не купишь😭
@@autovikup2428 а теперь?
price
kiss your fingers good bye... not cool.
Wehrmacht Erica 😂