I just did this exam with Ableskills BE VERY CAREFUL IF YOU USE ABLE SKILLS the preparation and exam are horrendous. AND I PASED IT! I asked for permission to switch off and then told “you didnt ask youve just failed” i walked away thinking “i failed” and then realised “but i asked?” So challenged the assesor, i was then told, oh yes you did didnt you. I was allowed to continue but it took me 15 minutes to regain my composure. I started making errors, and when i had finished assesor said I had only just managed to get through it as lots of minor errors. Whose fault was that then? there you tube videos do not have comments disabled for no reason. This was last week of 4 weeks training several others quit before 4th week as couldnt handle the stress.
Good stuff there David. Trying to get my answers out berfore you did was not easy. However I was surprised how many I knew. Thanks again for putting in the time
thanks for this video also would you be able to do a video on 2391-52 written exam and some example question? i really cannot find any examples of these !
hi there could you please answer this question if you dont mind for a single -phase instullation the test for PFC is carried out between A. line and earth and neutral and earth B line and earth and line and neutral c neutral and earth and line and neutral D line and neutral only . which one is correct ?
Great Video for Fundamental/ initial verification, I am doing the EAL version of this which is the equivalent to C&G 2392-10. Thank you, Ninja, for this post.
I don't understand question 1. Lets say I have just completed a rewire, are we saying that I have to go home and complete the paperwork before I can go back and turn all the power on for the customer? That question would definitely catch me out as not how it works in the real world or have I completely misunderstood?
Hi Ninja. I'm a 2365 Level 3 student struggling with the science bit of the course. Is there any chance you can do a few videos showing the inductive reactance, impedance, triangles please?? Cheers!!
Sure, I'll try to get some together when I can, in the mean time there are some videos of RUclips that will have info on this if you search for it. I know that Joe Robinson has starting uploading content in this area so he may be able to engage with you more readily on this.
Sorry sparky ninja, but I think maybe q.10 would be in the scenario of an EICR - as the installation shouldn't be energised causing the pump to be overloaded in the first place.
They will only provide you with Ze, as the PFC relies on the presence of all parallel paths within the installation; and must therefore be measured at the consumer side.
@@NebakinezaOG see 313.1 pg 49 of the regs or pg 19 of GN3. The DNO will provide the PFC. These will be max values, a more accurate figure can be measured.
Quality video! Really useful as there's only a couple of mocks on Smart Screen so seeing some different questions is really helpful. Do you know of anywhere else they can be accessed? Thanks again Mr Ninja!
jsut looked in sart screen as i'm about to do my exam, could only find 2 sets of 15 questions on there, not even a selection big enough for a full exham...
Any possibility, for you Sparky Ninja to do a video on axillary control breakers and the design of there circuits; including the use of BMS and PLC combined with the circuit's design?
Any chance of getting some EAL example papers? On our course we just did all C&G mock questions but turns out our papers are all EAL and they only allow GN3
Thanks for the Upload 👍🏽 By any chance would you happen to know why EAL doesn’t allow for OSG and only GN3 for the multiple choice... As it seems some of the questions in your paper would need referring to the OSG ..? Thanks Again
Brilliant video ninja. Keep up the good work and clearly concise information. Is it possible for you to tell us what tester I could get for long term use please?
Q41 is C 0.45 need to time the tabulated figure by 0.8 for correction
C is 0.35....answer B is 0.45
Question 41 is C. Maximum tabulated values from from 7671 need to be multiplied by 0.8, on site guide values don't.
I passed today. Thank you for posting this. Very helpful 🙏🏻
What were the questions like dude?
Yeah any Recommendations, gonna be doing my soon?
Great but Q43 was jumped. Why?
I just did this exam with Ableskills BE VERY CAREFUL IF YOU USE ABLE SKILLS the preparation and exam are horrendous. AND I PASED IT! I asked for permission to switch off and then told “you didnt ask youve just failed” i walked away thinking “i failed” and then realised “but i asked?” So challenged the assesor, i was then told, oh yes you did didnt you. I was allowed to continue but it took me 15 minutes to regain my composure. I started making errors, and when i had finished assesor said I had only just managed to get through it as lots of minor errors. Whose fault was that then? there you tube videos do not have comments disabled for no reason. This was last week of 4 weeks training several others quit before 4th week as couldnt handle the stress.
Good stuff there David. Trying to get my answers out berfore you did was not easy.
However I was surprised how many I knew.
Thanks again for putting in the time
great video, really helps with how you read the question into sections . thank you
isnt the answer to question 47 c
thanks for this video also would you be able to do a video on 2391-52 written exam and some example question?
i really cannot find any examples of these !
you skipped question 43
hi there could you please answer this question if you dont mind
for a single -phase instullation the test for PFC is carried out between
A. line and earth and neutral and earth
B line and earth and line and neutral
c neutral and earth and line and neutral
D line and neutral only .
which one is correct ?
Can we have a video specifically on calculations
Great Video for Fundamental/ initial verification, I am doing the EAL version of this which is the equivalent to C&G 2392-10. Thank you, Ninja, for this post.
I don't understand question 1. Lets say I have just completed a rewire, are we saying that I have to go home and complete the paperwork before I can go back and turn all the power on for the customer? That question would definitely catch me out as not how it works in the real world or have I completely misunderstood?
Hi Ninja.
I'm a 2365 Level 3 student struggling with the science bit of the course. Is there any chance you can do a few videos showing the inductive reactance, impedance, triangles please??
Cheers!!
Sure, I'll try to get some together when I can, in the mean time there are some videos of RUclips that will have info on this if you search for it. I know that Joe Robinson has starting uploading content in this area so he may be able to engage with you more readily on this.
@@SparkyNinja Cheers mate!
I'll check out Joe Robinson.
My tutor today said, the answer to Q5 is - d. HSE Guidence note GS 38. Although he did also say he didn't think it was right personally.
Yeah that's wrong. GS38 is related to the selection of test instruments.
Guidance Note 3 tells us how to do initial verifications (badly).
@@SparkyNinja I have my exam tomorrow , this could be the question that will stop me getting 100% pass mark 😉
@@kathrinebennett4095 let me know how it goes 🤞
Hiya , I passed my exam 🤪 Luckily the question didn't come up. Thanks for these uploads. I will for sure recommend 👌
Sorry sparky ninja, but I think maybe q.10 would be in the scenario of an EICR - as the installation shouldn't be energised causing the pump to be overloaded in the first place.
what happened to Q43? and im sure the DNO will provide you with the value of the PFC, if you ask nicely ;)
They will only provide you with Ze, as the PFC relies on the presence of all parallel paths within the installation; and must therefore be measured at the consumer side.
@@NebakinezaOG see 313.1 pg 49 of the regs or pg 19 of GN3. The DNO will provide the PFC. These will be max values, a more accurate figure can be measured.
Could you please share answers for all the question in your drop box.
What exactly is the difference between 2392 and 2391 initial?
Thanks for your video. enjoyed them all so far.
Quality video! Really useful as there's only a couple of mocks on Smart Screen so seeing some different questions is really helpful. Do you know of anywhere else they can be accessed?
Thanks again Mr Ninja!
jsut looked in sart screen as i'm about to do my exam, could only find 2 sets of 15 questions on there, not even a selection big enough for a full exham...
Can you do the 8202 written exam please
Any possibility, for you Sparky Ninja to do a video on axillary control breakers and the design of there circuits; including the use of BMS and PLC combined with the circuit's design?
I will start drafting something together.
Hi... thank you so much for such a useful tutorial... is there any chance we can have the answer for Q 43, as I think it is missed... regards
The answer to 43. is C
Any chance of getting some EAL example papers? On our course we just did all C&G mock questions but turns out our papers are all EAL and they only allow GN3
Thanks for the Upload 👍🏽
By any chance would you happen to know why EAL doesn’t allow for OSG and only GN3 for the multiple choice...
As it seems some of the questions in your paper would need referring to the OSG ..?
Thanks Again
could you please put more mock questions ?
Brilliant video ninja. Keep up the good work and clearly concise information.
Is it possible for you to tell us what tester I could get for long term use please?
Hi Sparky ninja can you help us with 2391 52 with any video we can watch or any advice for the exam?
This will be very helpful 🙏
Sure. I've got some videos on the training outcomes and I have an exam simulator you can try.
Is the answer to Q43 C?
Passed today top marks 🤙🙏
Any suggestions as I got my soon, I brought the Guidance note 3 and the osg
question 41 isnt it 1.85ohms*0.8-1.03 you forgot the correction factor
No, the question states the tabulated value. It is the way it is worded, they are sneaky!!
@@EveryoneLovesPeacocks you are wrong. A tabulated value needs a correction value. Even spaky ninja confirms this in question 44
would this be the same as the 2357-107 exam?
Thank you so much.
Hi, unfortunately I can not download the paperwork, the link does not work, can you help me?
HOW ABOUT QUESTION 43
Hi. Please can you explain how many testing sequence for the three phase?
10 from memory .
What’s the answer to 43
Had my exam and few of these questions came up
missed number 43
You missed question 43 ninja
Just passed this exam it was hard I just passed by 2 marks