custom fiberglass door panels for car audio

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 73

  • @darrelparenteau2795
    @darrelparenteau2795 2 года назад +4

    Excellent! Your technique is exactly what Magic Sound Pro does, and its now the way i will be doing my panels moving forward.

  • @tonyfoley9988
    @tonyfoley9988 Год назад

    These pods look great. You did an awesome job, bud.

  • @shamous180
    @shamous180 3 года назад +3

    Even thou there no details I learned a bit from your vid sir

  • @pimpalamac3411
    @pimpalamac3411 3 года назад +4

    What kind of tape do you use before the fiberglassing?

    • @jaybee1158
      @jaybee1158 2 года назад +1

      Idk if u found the answer you were looking for but its just plain masking tape. It’s just your preference you can use the “Scotch-blue, frogTape or just reg scotch masking tape “. Any other questions Ill gladly answer them if not good luck..

    • @pimpalamac3411
      @pimpalamac3411 2 года назад +1

      @@jaybee1158 thank you sir.

  • @rf4215
    @rf4215 Год назад +1

    Did the wood panel you started with stay in the mold and sandwiched between fiberglass? Or you removed the wood panel?

  • @SanchoSanto
    @SanchoSanto 3 года назад +20

    I would have rather seen a series of videos at a normal pace instead of getting a head ache.

    • @TrendyBromando
      @TrendyBromando Год назад

      That just shows your weak mind

    • @emmittbishop4783
      @emmittbishop4783 Год назад +1

      You could just change the playback speed.

    • @SanchoSanto
      @SanchoSanto Год назад +1

      @emmittbishop4783 it's easier to just select another video.

  • @corystock1569
    @corystock1569 2 года назад +1

    Great video. Sped up pace is perfect too. Thank you!

  • @RuBeNBeaT
    @RuBeNBeaT 2 года назад

    What's the song at the ending?
    Very good job. Too much resine at the base.

  • @josiassilvalima4582
    @josiassilvalima4582 Год назад

    Esse decido quer você usou é algum tecido específico? Ou eu posso usar qualquer tecido?

  • @russsmith9042
    @russsmith9042 2 года назад

    Very nice and who's the band that's playing right there. Those sound Kick-Ass

  • @bobbygarcia-garcia4871
    @bobbygarcia-garcia4871 3 года назад

    Do u clean ur brushes with water?

  • @fabiogcarvalho
    @fabiogcarvalho 3 года назад +2

    Dude, congrats, VERY VERY good job. Can I ask you something? What kind this red cloth and glue do you used?
    Thanks and I loved it.

    • @eustahijelifetips
      @eustahijelifetips 2 года назад

      Its super glue and its regular stretchable cloth, built my pods exactly like that

    • @fabiogcarvalho
      @fabiogcarvalho 2 года назад

      @@eustahijelifetips thanks dude, just make sure.

    • @eustahijelifetips
      @eustahijelifetips 2 года назад +1

      @@fabiogcarvalho its diy friendly although make sure to try out working with fiberglass first to make sure how it works so you will get good results when making your final product, search on the internet how to make it not crack

    • @fabiogcarvalho
      @fabiogcarvalho 2 года назад

      @@eustahijelifetips thanks for the tip. I'm watching countless videos of how people have been working with these materials before making mine. The winter here is very harsh (Canada -20C) and I can't do anything right now, it will be my project for after April.

    • @eustahijelifetips
      @eustahijelifetips 2 года назад

      @@fabiogcarvalho most of it you can do indoors, just air out the room properly, while cutting fiberglass is best done outside

  • @Salvo09100
    @Salvo09100 Год назад

    Dude, you are a monster!!!👏👏👏. Sincere congratulations. I wanted to ask you something, the fabric and bone you used, I understand that. it is an elastic fabric, what kind of fabric is it, what is it called?

    • @408SPLKINGS
      @408SPLKINGS Год назад

      In English fleece
      Very cheap & very easy to work with

  • @hajikhan2634
    @hajikhan2634 Год назад

    Great 👍 job

  • @elelegido3821
    @elelegido3821 6 месяцев назад

    Pero no lo vasa forrar con tapiz?

  • @beekaye1496
    @beekaye1496 2 года назад +1

    Love your work!!!!!

  • @thanosmaganiaris2960
    @thanosmaganiaris2960 Год назад

    Nice work

  • @st.m.6187
    @st.m.6187 Год назад

    nice and clean!!!

  • @jonseeley8263
    @jonseeley8263 2 года назад +2

    instead of doing the first step....making the rear panel out of fiberglass......why not just use 1/4 plywood or mdf......save a huge amount of time.......you end up cutting 90% of it out and throwing it away anyway

    • @shawn4880
      @shawn4880 Год назад

      By doing it that way the pods will seat much better with the contour of the door panel

  • @jamespatterson3913
    @jamespatterson3913 2 года назад +2

    It doesn't matter how good your craftsmanship is, this video was unwatchable due to the speed. I had to jump to the end to see how they turned out. hopefully all of your videos aren't ruined like this. I tried slowing it down to .25 speed and was still too fast. it has a lot to do with my slight ADHD, the speed in conjunction with the sounds was very irritating. like others have mentioned , I would rather watch an hour long video than this. But this is just my opinion.

  • @REGULATORS_408
    @REGULATORS_408 2 года назад

    Do you sell them?

  • @2ndshiftaudio300
    @2ndshiftaudio300 3 года назад +1

    OMG!!! There's a much faster way when the door is already flat.

    • @VareaIII
      @VareaIII 2 года назад

      How?

    • @jaybee1158
      @jaybee1158 2 года назад +1

      Hell yeah it is .you don’t have to mess with the different level and heights and dips and etc..

  • @sebastianstarnes4291
    @sebastianstarnes4291 3 года назад +1

    Hey wanna see me make a fiberglass speaker mount(half a second passes) wanna see me do it again?

  • @pablorivera6879
    @pablorivera6879 3 года назад +9

    Could be a great video at a slower pace

  • @johnnycalvert9038
    @johnnycalvert9038 3 года назад

    Well done, just doubled the value of the vehicle.

  • @liudas5377
    @liudas5377 2 года назад

    Nice job!!

  • @kibeng-m110
    @kibeng-m110 Год назад

    Nice the vacum cleaner....🤣

  • @rawfusionmcqueen7748
    @rawfusionmcqueen7748 2 года назад +3

    Too much haters under this post . 😏

  • @ghettoink5699
    @ghettoink5699 2 года назад

    nice work

  • @isaacnava830
    @isaacnava830 2 года назад

    Que pegamento usas para pegar la tela licra ala madera

  • @SHEOLUIS1
    @SHEOLUIS1 10 месяцев назад

    Eso le da vibración al metal y resta calidad al sonido

  • @isaacnava830
    @isaacnava830 Год назад

    Que pegamento usas para pegar la tela

  • @robojn06
    @robojn06 3 года назад

    Nice

  • @brendanfitzpatrick7399
    @brendanfitzpatrick7399 2 года назад

    great video but way too much effort required for a single product/solution.. i hope the customer paid well for this

  • @musicforce7736
    @musicforce7736 3 года назад +4

    Too much time wasting , no need for all that fiberglass for the base

    • @jaimesauceda5202
      @jaimesauceda5202 3 года назад +1

      Thought the same , most of it got cut out anyways so why apply so much? Lol

  • @carlostoledo7705
    @carlostoledo7705 3 года назад +1

    Quien va a entender lo q haces si lo tienes turbo

  • @akhmedkadiev6424
    @akhmedkadiev6424 3 года назад +1

    Автозвук своими руками, вроде так его канал называется

  • @vasya_k3419
    @vasya_k3419 День назад

    Сплошное мельтешение картинки, очень тяжело для восприятия.

  • @robertoscopigno7007
    @robertoscopigno7007 2 года назад +1

    Filmato troppo veloce, dopo 10 minuti ti viene mal di testa, meglio Magic Sound

  • @lucaf.4886
    @lucaf.4886 2 года назад

    Però un po' di orientamento dei diffusori non avrebbe guastato per il.posionamento della scena sonora

  • @mécanike6256
    @mécanike6256 2 года назад

    salut c'est quoi comme tissu

  • @AntoineFinch
    @AntoineFinch 2 года назад

    Well he never said this was a teaching video! anyone learn anything at all from this?

    • @jaybee1158
      @jaybee1158 2 года назад

      Lol spot on by reading these comments I think people are misunderstanding that this is a
      Tutorial lol.. but I try and help those who had questions, this vato just showing his skills that’s it.

  • @onewheelup
    @onewheelup 2 года назад

    you should have used a milk shake bro,rigid is king,but im not going to be one of those guys that bashes a fellow white man.

  • @doraexplora9046
    @doraexplora9046 2 года назад

    Sorry that was rorible

  • @BrianMered
    @BrianMered 3 года назад

    Are you serious! A NIGHTMARE TO WATCH!

  • @MiguelAngel-gh7of
    @MiguelAngel-gh7of 2 года назад

    muy buen trabajo yo quiero uno para una avance 2004 para poner unas bocinas de 6x9 en las puertas cuanto costaría mándame tu numero por favor

  • @GabbrieleFumetti
    @GabbrieleFumetti 2 месяца назад

    Amici cinni bimbi semi Gratteri ringrazia seno andavi in miniera al buio sfigato Davide Rossi