Gas Pilot Cleaner - A 3 Minute Repair - GasPilotCleaner.com

The Gas Pilot Cleaner is a tool kit that allows you to clean a gas pilot assembly easily without removing the orifice or pilot assembly from equipment. For more info visit gaspilotcleaner...

[@skagnatti3415]

On point. Used a reg air pump and just held it with my hand. Pilot is stout and blue now.

[@jameslinderman6582]

This dude is right on about the Gas Pilot Cleaning method. I fixed my problem in 20 minutes using this technique. it saved me a service call!

[@dola7045]

Site does not load.. Does anyone know how to reach this guy?

[@ISignedUpBefore]

Very good idea. Mine needed this after blowing dust, dirt and ash in the wrong way. Thank you!

[@shanewilliams4378]

I'm wondering and asking will this work on multiple to gas fryers?

[@michaelray2487]

Worked like a champ. Mine had 2 fittings and was the silver one. just look near the pilot assembly and verify color. hooked a portable air compressor up and blew it out while holding the compressor on with my fingers. no other took required.

[@Alan_Edwards]

Yeah I think this might be my problem too. The pilot flame is real small and does not change no matter how far I turn the adjusting screw out, but it does get smaller if I turn it in so I am pretty sure it's blocked. Going to disconnect the line and blow it out with my air compressor. 🤞

[@LauriSpitz]

Thank you! I've been waiting for my landlord to come look it and it's too cold to wait!

[@iLikeMike]

Ours wouldn't stay lit and we fixed it with one of those pads that is on the back of some kitchen sponges. Turns out the thermopile was dirty, so we simply cleaned it off. I posted a video on my channel if you want to see how easy it was to fix.

[@iTzSaj]

Guy is on the money… had yellow flame but use an air duster can

[@DH-mc3cj]

Gracias

[@wildmanofborneo]

Thanks for the video. What if the OFF/PILOT/ON valve won't turn at all (even when you push it in and then turn)? Usually a lubricant problem or something actually broke?

[@franciscobanda6790]

Esto es efectivo solamente cuando es polvo la obstrucción, si la obstrucción es algo solido, sera necesario desarmar.

[@rosethornDesigns]

I didn't use an adapter THANKS A MILLION Great Idea

[@caitlinhendrick7488]

0:53 My nose during the summer:

[@remodelassets6523]

🤣Puff💨

[@kippywylie]

How do I know when the pilot light is broken vs just dirty and needing your tool? 25 year old Majestic/Vermont Castings gas fireplace and the pilot light lately has a large yellow flame.... And the main burner will not light.

[@davidmaynard6190]

Do what is this accurate

[@420connex]

where can I buy that brass adapter?

[@robertnorton2612]

Did you ever find brass adapter

[@420connex]

No dumb, this is a common problem.

[@tanakaokada4782]

1/8" to 1/8" NPT female coupling does not fit.@@tedmckenna1934

[@remodelassets6523]

When I try to go to the website it kicks me to a janitorial cleaning products page! 🤦‍♂️🤷‍♂️

[@jrodjared]

Looks like a bike pump to me

[@MichaelMosesHammer]

Just blow the line out with a low pressure air nozzle. Works great. No need for a old foot pump. lol

[@jpoppiejaun35]

My thought exactly

[@ngonga5118]

Do you have any others solution for dried soldering inside the pump?

[@ong-artrunghirun533]

What is brass adaptor size?

[@alive-awake]

the link does not show a pilot cleaner kit.

[@JoseLopez-bt7zp]

Help! I have a Desa T32ENRB gas/electric fire place. I'm having the issue of it shutting off after the bunners cut on. What's hard to figure out is that this unit doesn't had a thermo coupler or a thermo pipe. There is only a gas line to the pilot and to the bunners. So I'm thinking everything else is electrical. If you can help me in any way I would highly appreciate it. Thank you!

[@Martindyna]

Pilot burner, nice efficient blue flame but main burner inefficient yellow flame because manufacturers think that's what the customer wants !

[@xcw7910]

Why go to all that trouble when you can use a standard vacuum (pref with nozzle but not required) and vacuum it? No need to buy anything and a lot faster.

[@russellt9059]

Where can you get one

[@franksciarabba8571]

Gas any one ever cleaned a boiler pilot light this way? Just unscrewing the silver tube at the pilot and blowing air all the way threw it till it reaches the pilot-

[@kippywylie]

Are you saying I could simply use my little nail gun compressor and blast a quick jet of compressed air up through the hose/fitting this guy in the video did.... And skip purchasing another tool?

[@AwakeDude911]

wow a 1984 bike pump in use in 2017....OOOOOOoooo my

[@RyderRipps]

this works

[@photoads1]

What happened to this? Still available anywhere?

[@howardc9144]

i use dust off just shot it in and out

[@carlthornton3076]

OK!!!

[@imahumanperhaps882]

cant find it
help

[@BOB12349307]

are you kidding me thats a tire pump from like 1980

[@bluekeet]

wow!! so fucking simple and i never thought of that, iv'e been fucking turning on my pilot so many times now. It's been burning yellow.

[@بنیامینرضائی-ك1ف]

oky

[@dukereaper2284]

What he basically is saying is, clean ur damn shit before u leave it all summer without running it

[@johnpeterson5791]

Looksl ike they are out of business :-/

[@Sharakomusic]

Heating and cooling guys organization killed him..

[@jpoppiejaun35]

What a joke