Thanks a lot! Worth to mention: If you have activated RSSI_ADC value in the config tab you will not be able to save the channel setting (think that was posted here, too). Took me a while to figure that out. Now it´s working! Thanks again :)
This man is a legend, I just started flying and I am loving it. I am 19 years old and it is quite expensive for me so I realy need my RSSI value to show on my OSD. Joshua Bardwell you are a life(Drone) saver
Many Thanks. Been struggling with this for 2 days - searching, searching...until this. Don't understand the "why". But for now the step-by-step procedure is good enough for me.
For whatever reason I messed up something on my Taranis , I didn't have RSSI on OSD anymore (99% steady ) and I have forgot how to get it back again . You helped me out to remind some part of the process. Thanks!! Really appreciate your work!
It is funny to see my reaction on youre video 2 years ago, bought the diatone Roma f1 and needed to set the OSD RSSI like the way in this video. THANKS AGAIN !! forgot how to do it, you are the best.
been a subcriber for years. stopped flying for over a year. just started back up. and MY GOD! thank you so very much. Ive been looking for a proper setup vid for over an hour. i found MANY that allllmost explained it. but you freaking nailed EXACTLY what i needed to do and why. I dunno why i didnt just search your video list to begin with.
This is an older post but it has helped me. I had done it once for my crux3 but I forgot how I did it when I got a new radio TX16s. Great to review things like this.
I got the Kopis 1 because of you as my first drone this spring. I was practicing with little whoops indoors and the big scary race drone was still very intimidating! Now, thanks to you and other really cool channels, I am already flying acro FPV and getting into the trick tutorials. What a great hobby with folks like you, teaching us something EVERYDAY! Keep up the great work, liked and subbed!
SUPER!! On Matek F411 wing - NO rssi on the flight controller!! And -as resolt -no rssi on the screen osd.( only on Taranis.But i fly with glasses fpv) I used this video for INAV with Frsky X8R ( it has rssi) !! And i get RSSI on the osd! Thanks Joshua!
This same setup has worked for over a year. JC had this on his channel. I'm happy you did it here as well, since your channel is ongoing. Has to be a telemetry receiver. The xm+ will not work this way but it automatically puts rssi on channel 8 or channel 16 depending on the firmware you use.
GREATLY appreciate this man. I couldn't get RSSI working using XSR with CLRacing F7. Supposed to be simple, but it wasn't. Until this vid, I never knew I needed to do this...
HI Joshua, I am just getting started in FPV and I am finding your videos to be so informative. I have a QX 7 Tx and FS HD2 goggles and I am a bit confused about what and how much telemetry I am going to need to see on both. I want to fly safe and this RSSI information is one thing that I deem necessary to do so. Have you considered making a video that encompasses setting up a totally Frsky based quad using the QX 7 and supplying information on the best receiver to match with it? I would think it would help a lot of pilots like myself. There is so much to learn about building a quad and how everything fits together. I appreciate your work and tutorials very much. Thanks for your time.
Cool. I've followed all your videos on the Taranis. Including setting up all the voice settings to call out voltage etc.. Problem is I really like to fly with music. So having everything on the OSD is actually more helpful than having things audibly called out. Especially when you can't hear it. Lol.... Also thank you for making it clear how to get caps when naming things.
love all your videos Bro you've helped me along with my quad problems over the past year I don't know where I would be if it wasn't for you and your videos keep it up and thank you for all the hard work👍you do to make these great videos
Thanks for this. I couldn't figure out why it seemed like everything was working except RSSI on the Setup page showed 0%. Power cycled and it's all good now. Thanks!
You need to have telemetry enabled in your flight controller and you need to be using a telemetry-enabled receiver. Then you go to the Telemetry screen and do "discover sensors".
7 лет назад
Awesome, this gives me the option if I have forgotten to update my XM+ to the newest version and already soldered to FC to just use this method. Beets having to desolder the receiver find a servo cable solder it to a receiver and then update it. Thanks, Joshua !
I have a radiolink AT9 transmitter and the little receiver i use (r6dm?) doesn't have rssi pad. however, latest firmware for the AT9 lets you send rssi on an aux channel and this appears to work! tested on the bench only so far, but like your video, it appears to work. put my hand in front of the antenna and it drops, so it's definitely doing something! and it's much simpler to set up in the radio than in your demo.
Thanks you so much I have looked everywhere for help on this and everyone made this task so complicated and your is so simple fast and doesn't require a bunch of soldering like others thanks jb
Joshua, you can edit the RSSI unit in the Telemetry screen. Just go to the RSSI sensor, press Enter and Edit. Scroll down to the unit (probably dB, as per default) and change it to %.
Only use Spektrum Serial Telemetry RX’s and the reason that I only use those receivers is that I get battery voltage and RSSI sent to my radio and it is told to me verbally which is my preference as I personally don’t like to be distracted by OSD. Interesting vid if I ever jump ship and I like to see the competition 👍
Well, late to the party, but thanks so much JB! I have quads that wouldn't read RSSI, and I'm new, so I was just letting it slide. I just got 2 new ones hooked up because of your easy to follow video. I would ask people and they would say, "well... ya just need to set it up in BF" or " ya just set it up in your radio.". I was ready to give up. Now I have about 6 more I got to set up with FrSKY RXs , and I know it will work! Thanks again! Steve Harding _ SouthernOutlawDrones
Classic JB . Thanks for this made my RSSI work better . Problem I was having was even though I have rssi on my osd. The maximum signal was 33%??????? Standing right next to my drone. But on the taranis it measured 87DB. It should have measured 100% on the on OSD. OnCE I did your fix, the osd now measures 100% on the osd and the taranis is 87DB. Much easier to calcuate distanced to drop out now. AWESOME!
@Mateo Fiuza Worku Dude !!! ..... Your one comment just solved three(3) hours of pain at my bench today. Thank-you Millions !!! You have saved many hair follicles (Nothing peronsal JB) Cheers much !! I had to reboot and save however. Done... Now it's finally on my OSD via the DYS F4 Pro V2 FC :)
I did what you explained and have it showing in the receiver tab on AUX7. when I choose the rssi Chanel as 7 it doesn't show in the set up tab or OSD. Any suggestions?
Thank you very much! Only thing missing was that RSSI analogue needs to be turned off in beta flight. Someone else mentioned it in the comments though.
There are CLI commands which set the RSSI offset and scale. With these you can adjust the readout value on your OSD to match the RSSI telemetry page on your Taranis. The default value in Betaflight 4.2 was offset = -10 so my OSD readout was 10% low. The setting below gave me matching readouts. set rssi_scale = 100 set rssi_offset = 0
Joshua I remember Project Blue Falcon did some tests with RSSI and he figured that if you go below around 40dB, chances of failsafe goes pretty high... It's a memory thing tho, I should go check back the video he did... Damn you college days, memory isn't what it's used to be
Ok I followed along and did everything the way you did, I have telemetry output enabled on my FC and I can see the telemetry working on the receivers tab, but when I enable it on my Aux channel it won't show up on the Setup tab in Betaflight. Using an X4RSB receiver
please, dont forget to mention, that after setting the RSSI chanel in beta, you need to completly disconnect drone from beta, and reinsert its battery. Otherwise you wont see the RSSI values. This applies for frsky archer RX (tried two different frsky archer on twor drones)
Dear Mr. Bardwell… I really appreciate the effort you put into your videos, but a vlog about “how many Bardwell video’s much I watch to fly (this thing)!?” would definitely kill it!! Just kidding.. a bit. Love your videos man! JD
Good vid for the library on how to set up RSSI . Thanks Need one for TBS crossfire / one on how to set up Taranis to adjust pids through radio if you haven’t covered that one. All stuff soon I’m getting too. I’m just a slow dog learning new tricks. Again thanks. I’ll be sure to send a bone soon for my support . Your awesome Joshua keep up the great job.
Joshua Bardwell.... Will do. Oh yea,Id liced to see you get into the mini quads more. 2 to 4 inch. Baby Hawk on its way, looking foward to a great tune with 550mAh 3 s on it. :)
Блин, два дня паял пины на полётнике и приёмнике с этим Rssi, а так просто оказалось )) Спасибо за видео (слова то не понятны, а вот манипуляции на экране супер!).
Awesome vid for my old shuriken 180 pro which didn't have osd. I've set up the microminim now, trying to get rssi from channel 8 of my FC, but the value I see on my osd for rssi keeps jumping around (I have calibrated the msowd using the sticks menu on my taranis and it does show 0for rssi when the radio is off and 100 when it's on, but the value jumps erratically down as low as 17!). I have rssi invert on my cli.
I want to tell you a trick I learned from somewhere I use the momentary switch to read out my RSSI value in decibels. Whenever I'm flying I can just split the momentary switch with my pinky and the voice tells me my RSSI and it's just a cool trick if you feel like telling people or not it's cool I thought it was an awesome tip
Joshua that is a great video, question AMP 2.8 and X8R how to install (hook up) to AMP the RSSI? Please remember I'm not too smart. I tried using Beta Flight and I can't get it to connect. What am I doing wrong? I'm also using Mission Planner. Teach me something today. You have tons (1000's) of videos, It's going to take me a while to go through them. I love the way you explain how to.
After following this video I still wasn't getting any rssi in my video. But I eventually found it was because I needed to enable smart port in ports tab.
I see the AUX5 bar go up and down and looks like it is the signal since it drops when I take the controller away, but in the setup and the OSD there's zero all the time...solution?
I just did it with my Flysky FS-i6, with the latest 10 channel firmware flash using aux channel 5 and "error" as the resource, Thanks again Joshua! BTW using flysky x6b receiver on i-bus
Do you want me to surprise you? On my Taranis 7 I installed the multiprotocol module IRange. I binded with the receiver FS IA6B.(With the latest firmware for this receiver.) And on the screen Taranis qx7 I see RSSI from IA6B! :) And in the latest firmware for IRange, also works failsafe for receivers from FlySky. That's why I change FlySky to Taranis-and I can use receivers from FlySky.
I was trying to get RSSI on my OSD for about 2 weeks to no avail. After watching this video it was a matter of 5 minutes. Thank you JB !
Idem
Thanks a lot!
Worth to mention: If you have activated RSSI_ADC value in the config tab you will not be able to save the channel setting (think that was posted here, too). Took me a while to figure that out. Now it´s working! Thanks again :)
This man is a legend, I just started flying and I am loving it. I am 19 years old and it is quite expensive for me so I realy need my RSSI value to show on my OSD. Joshua Bardwell you are a life(Drone) saver
I am 47yo and love JB to for his clear and patient explanations. He must be very nice in real life too.
Many Thanks. Been struggling with this for 2 days - searching, searching...until this. Don't understand the "why". But for now the step-by-step procedure is good enough for me.
For whatever reason I messed up something on my Taranis , I didn't have RSSI on OSD anymore (99% steady ) and I have forgot how to get it back again . You helped me out to remind some part of the process. Thanks!! Really appreciate your work!
It is funny to see my reaction on youre video 2 years ago, bought the diatone Roma f1 and needed to set the OSD RSSI like the way in this video. THANKS AGAIN !! forgot how to do it, you are the best.
dude ive been scratching my head at this for weeks. thank you so much josh. youve saved me so many times.
been a subcriber for years. stopped flying for over a year. just started back up. and MY GOD! thank you so very much. Ive been looking for a proper setup vid for over an hour. i found MANY that allllmost explained it. but you freaking nailed EXACTLY what i needed to do and why.
I dunno why i didnt just search your video list to begin with.
This is an older post but it has helped me. I had done it once for my crux3 but I forgot how I did it when I got a new radio TX16s. Great to review things like this.
I got the Kopis 1 because of you as my first drone this spring. I was practicing with little whoops indoors and the big scary race drone was still very intimidating! Now, thanks to you and other really cool channels, I am already flying acro FPV and getting into the trick tutorials. What a great hobby with folks like you, teaching us something EVERYDAY! Keep up the great work, liked and subbed!
Holy Mother of Pearl! I learned something today...and more than one thing! Thank You...again!
Nice. Sending the RSSI as a channel didn't even occur to me.
It's amazing that you helped in in 2024 to get my RSSI sent to Arduoplane. Thank you
SUPER!!
On Matek F411 wing - NO rssi on the flight controller!!
And -as resolt -no rssi on the screen osd.( only on Taranis.But i fly with glasses fpv)
I used this video for INAV with Frsky X8R ( it has rssi) !!
And i get RSSI on the osd!
Thanks Joshua!
This same setup has worked for over a year. JC had this on his channel. I'm happy you did it here as well, since your channel is ongoing. Has to be a telemetry receiver. The xm+ will not work this way but it automatically puts rssi on channel 8 or channel 16 depending on the firmware you use.
yes. if it does not work or show a fix rssi value of 50, then you need to update firmware on your XM+.
Fliptality yep
Thank you Joshua. I followed your steps exactly and now it is working for me. Like your catchphrase says "I learned something today".
GREATLY appreciate this man. I couldn't get RSSI working using XSR with CLRacing F7. Supposed to be simple, but it wasn't. Until this vid, I never knew I needed to do this...
I was just searching for this last week!! There definitely needed to be better info for someone that had no clue how to make it work.
HI Joshua, I am just getting started in FPV and I am finding your videos to be so informative. I have a QX 7 Tx and FS HD2 goggles and I am a bit confused about what and how much telemetry I am going to need to see on both. I want to fly safe and this RSSI information is one thing that I deem necessary to do so. Have you considered making a video that encompasses setting up a totally Frsky based quad using the QX 7 and supplying information on the best receiver to match with it? I would think it would help a lot of pilots like myself. There is so much to learn about building a quad and how everything fits together. I appreciate your work and tutorials very much. Thanks for your time.
Cool. I've followed all your videos on the Taranis. Including setting up all the voice settings to call out voltage etc.. Problem is I really like to fly with music. So having everything on the OSD is actually more helpful than having things audibly called out. Especially when you can't hear it. Lol.... Also thank you for making it clear how to get caps when naming things.
This one has been a godsend. A wholehearted TYVM!
You are the most helpful and least abbrasive quad guru I've seen on yourube. You're a fuckin' gem. I honestly can't stand anyone else.
I lean something almost every time i watch one of your videos . Thank you!
Thank you Joshua!!! This video solved the problem I’ve been having for months, with my telemetry readings!!!
love all your videos Bro you've helped me along with my quad problems over the past year I don't know where I would be if it wasn't for you and your videos keep it up and thank you for all the hard work👍you do to make these great videos
Thanks very much. That's very kind.
Perfect timing. I was just reading Oscar's article today.
Worked like a champ... just had to fully disconnect everything from power and re-power before it came up on my OSD with an HGLRC stack.
Thanks for this. I couldn't figure out why it seemed like everything was working except RSSI on the Setup page showed 0%. Power cycled and it's all good now. Thanks!
I was subscribed to you but i didn't know why until i have trouble with betaflight (until i have my first betaflight fc) you are so helpful!
At 3:46 I don't have Telemetry, I'm using a Taranis Q X7S. What should I do? Thanks!
You need to have telemetry enabled in your flight controller and you need to be using a telemetry-enabled receiver. Then you go to the Telemetry screen and do "discover sensors".
Awesome, this gives me the option if I have forgotten to update my XM+ to the newest version and already soldered to FC to just use this method. Beets having to desolder the receiver find a servo cable solder it to a receiver and then update it. Thanks, Joshua !
This video has saved me from so much frustration! Thank you!!
I have a radiolink AT9 transmitter and the little receiver i use (r6dm?) doesn't have rssi pad. however, latest firmware for the AT9 lets you send rssi on an aux channel and this appears to work! tested on the bench only so far, but like your video, it appears to work. put my hand in front of the antenna and it drops, so it's definitely doing something! and it's much simpler to set up in the radio than in your demo.
Thanks Joshua!
Never knew you could long press enter & bring up another menu!
Also another great video’ well done.
Wow the Stash ad was motivating!
Never knew you can do that. Now I know & definitely learned something today. Excellent video Joshua!!
Watching this again for my RXSR
Thank you so much Josh!! I finally learned how to add RSSI on my OSD.
Thanks you so much I have looked everywhere for help on this and everyone made this task so complicated and your is so simple fast and doesn't require a bunch of soldering like others thanks jb
Yess, thank you! I always thought that I had to do some difficult telemetry thingy to get rssi in the osd. But now I got it, easy peasy Japanese 😁😅
Great, great, great video Joshua. Now it all works perfectly, you're the best!
Joshua, you can edit the RSSI unit in the Telemetry screen. Just go to the RSSI sensor, press Enter and Edit. Scroll down to the unit (probably dB, as per default) and change it to %.
How does this affect the output to the RSSI Channel, though?
As far as I know, it is only used as a local value for the telemetry screen and announcements.
Thanks for this, just got a bnf chemeleon ti with rssi, I'll definitely be reviewing this video again when I set up when I get home from work
Mind blown! Thanks for sharing this Joshua !
Only use Spektrum Serial Telemetry RX’s and the reason that I only use those receivers is that I get battery voltage and RSSI sent to my radio and it is told to me verbally which is my preference as I personally don’t like to be distracted by OSD. Interesting vid if I ever jump ship and I like to see the competition 👍
Well, late to the party, but thanks so much JB! I have quads that wouldn't read RSSI, and I'm new, so I was just letting it slide. I just got 2 new ones hooked up because of your easy to follow video. I would ask people and they would say, "well... ya just need to set it up in BF" or " ya just set it up in your radio.". I was ready to give up. Now I have about 6 more I got to set up with FrSKY RXs , and I know it will work! Thanks again! Steve Harding _ SouthernOutlawDrones
You are a damn genius sir. Every question I had today you answered immediately. Quad all set up. Time to fly!!
Classic JB . Thanks for this made my RSSI work better . Problem I was having was even though I have rssi on my osd. The maximum signal was 33%??????? Standing right next to my drone. But on the taranis it measured 87DB. It should have measured 100% on the on OSD. OnCE I did your fix, the osd now measures 100% on the osd and the taranis is 87DB. Much easier to calcuate distanced to drop out now. AWESOME!
Mateo Fiuza Worku great info thanks had the same problem👍
@Mateo Fiuza Worku thanks man, had same problem!
@Mateo Fiuza Worku Dude !!! ..... Your one comment just solved three(3) hours of pain at my bench today. Thank-you Millions !!! You have saved many hair follicles (Nothing peronsal JB) Cheers much !! I had to reboot and save however. Done... Now it's finally on my OSD via the DYS F4 Pro V2 FC :)
Yuhuu, now I got RSSI on my OSD, I learned something today! Thanks!
As always super useful and well explained. Thanks a lot JB
Been trying to figure this out ,in the past, for some time now, great video JB . Thanks
Well over a year later and this works perfectly for my Vortex 250.. Cheers
Another old video that's been useful today! Couldn't figure out how to set the damn scale!
I solve my "OSD-RSSI not found problem" with your video! Very thanks!
Timing I was trying to do this and this video came out!! Great video.
The Flysky Ia6 with custom firmware can send RSSI per Aux channel!! :D Works awesomly..
Thank you! I'm going to try this. I am new and setting up RSSI has been kickin' my butt.
Thanks for sharing! Finally got the RSSI thingy work on my OSD!
Joshua.. I love you. Thank you, I learnt something again today...
i watch a lot off your stuff. I am subscribing cause this video actually helped me. thanks.
JB with the straight-fire facts!
This worked perfectly THANKS YOU SAVED ME A LOT OF TIME AND FRUSTRATION I WAS HAVING WITH THIS.
I did what you explained and have it showing in the receiver tab on AUX7. when I choose the rssi Chanel as 7 it doesn't show in the set up tab or OSD. Any suggestions?
Thank you very much! Only thing missing was that RSSI analogue needs to be turned off in beta flight. Someone else mentioned it in the comments though.
Thank you for this video, it is a big help to setup the RSSI for OSD. Happy Fly!
There are CLI commands which set the RSSI offset and scale. With these you can adjust the readout value on your OSD to match the RSSI telemetry page on your Taranis. The default value in Betaflight 4.2 was offset = -10 so my OSD readout was 10% low. The setting below gave me matching readouts.
set rssi_scale = 100
set rssi_offset = 0
Great work and thanks! I'm always flashed what the taranis can do!
Thanks Joshua. Worked like a charme !!!!!
I didnt know you could hold the enter button to get to the other menu! I learned something today...
Joshua I remember Project Blue Falcon did some tests with RSSI and he figured that if you go below around 40dB, chances of failsafe goes pretty high... It's a memory thing tho, I should go check back the video he did... Damn you college days, memory isn't what it's used to be
Cool video! Worked like a charm
Thanks for the help again Joshua
Ok I followed along and did everything the way you did, I have telemetry output enabled on my FC and I can see the telemetry working on the receivers tab, but when I enable it on my Aux channel it won't show up on the Setup tab in Betaflight. Using an X4RSB receiver
Nevermind I got it working. Thanks for the great videos!
In the telemetry page you can edit each sensor and change the unit and that's how to change db to %.
please, dont forget to mention, that after setting the RSSI chanel in beta, you need to completly disconnect drone from beta, and reinsert its battery. Otherwise you wont see the RSSI values. This applies for frsky archer RX (tried two different frsky archer on twor drones)
Thanks so much mate, I'm having so much trouble getting rssi value from the archer rs, it keeps the value at 99
Love you man! Totally forgot how to do this and found your video. Cheers brudda!!
Dear Mr. Bardwell… I really appreciate the effort you put into your videos, but a vlog about “how many Bardwell video’s much I watch to fly (this thing)!?” would definitely kill it!!
Just kidding.. a bit. Love your videos man!
JD
worked perfectly, thx you very much Joshua, keep up the good work
Great work there! BTW the Horus X10 also supports this natively without changing to OpenTx. It's even easier to do...
Good vid for the library on how to set up RSSI . Thanks Need one for TBS crossfire / one on how to set up Taranis to adjust pids through radio if you haven’t covered that one. All stuff soon I’m getting too. I’m just a slow dog learning new tricks. Again thanks. I’ll be sure to send a bone soon for my support . Your awesome Joshua keep up the great job.
+Bill14886 look up my video 3in flight adjustments
Joshua Bardwell.... Will do. Oh yea,Id liced to see you get into the mini quads more. 2 to 4 inch. Baby Hawk on its way, looking foward to a great tune with 550mAh 3 s on it. :)
I've had good success using this method in the past, but couldn't get it to work with Radiomaster ELRS. Any suggestions?
Блин, два дня паял пины на полётнике и приёмнике с этим Rssi, а так просто оказалось )) Спасибо за видео (слова то не понятны, а вот манипуляции на экране супер!).
You're a genius. Explained so well. Thanks!
Awesome vid for my old shuriken 180 pro which didn't have osd. I've set up the microminim now, trying to get rssi from channel 8 of my FC, but the value I see on my osd for rssi keeps jumping around (I have calibrated the msowd using the sticks menu on my taranis and it does show 0for rssi when the radio is off and 100 when it's on, but the value jumps erratically down as low as 17!).
I have rssi invert on my cli.
I want to tell you a trick I learned from somewhere I use the momentary switch to read out my RSSI value in decibels. Whenever I'm flying I can just split the momentary switch with my pinky and the voice tells me my RSSI and it's just a cool trick if you feel like telling people or not it's cool I thought it was an awesome tip
thanks for another great and clear video!!!!!!
great work :-) this helped me loads. keep up the great work you do
Great tip!!! So easy, why haven't I thought about this... Baaah. Thanks, as always
This really helped me thanks you Joshua you’re a legend
Thanks. Worked like a charm.
Joshua that is a great video, question AMP 2.8 and X8R how to install (hook up) to AMP the RSSI? Please remember I'm not too smart. I tried using Beta Flight and I can't get it to connect. What am I doing wrong? I'm also using Mission Planner. Teach me something today. You have tons (1000's) of videos, It's going to take me a while to go through them. I love the way you explain how to.
Thanks man! Really apprechiate your help! Big Love
Great video but not work for me UNTIL I turn on CHANNEL_FORWARDING on the Configuration tab ("Other Features")
That shouldn't have any effect. You do need to disable RSSI_ADC though.
Thanks
watched about 1 minute then I hit the subscribe! :)
After following this video I still wasn't getting any rssi in my video. But I eventually found it was because I needed to enable smart port in ports tab.
THX maaaan! Yo genius.. I was getting white hair and than i find your comment !!!
Great Thank you! This was much needed!
VERY USEFUL TIP!
thank you so much Joshua.
Dude this is ultimate! Thank you!
I see the AUX5 bar go up and down and looks like it is the signal since it drops when I take the controller away, but in the setup and the OSD there's zero all the time...solution?
I just did it with my Flysky FS-i6, with the latest 10 channel firmware flash using aux channel 5 and "error" as the resource, Thanks again Joshua! BTW using flysky x6b receiver on i-bus
Do you want me to surprise you?
On my Taranis 7 I installed the multiprotocol module IRange.
I binded with the receiver FS IA6B.(With the latest firmware for this receiver.)
And on the screen Taranis qx7 I see RSSI from IA6B! :)
And in the latest firmware for IRange, also works failsafe for receivers from FlySky.
That's why I change FlySky to Taranis-and I can use receivers from FlySky.
Do you maintain the same range via the module?
Can you please tell me how you did this, a link would be great!
After 10 .minutes.Ok?
ruclips.net/video/wZHw9swfLsw/видео.html