How to install flush mounted LED lights part 1
HTML-код
- Опубликовано: 26 июн 2022
- #flushled #ledlights #ledtape
Today I am installing some flush plastered in led profile ready for the colour changing led tape.
Click here to visit our Website 👉 www.greenhawkconstruction.co.uk/
CLICK ON THE LINK FOR YOUR FREE 14 DAY TRADIFY TRIAL USE PROMO CODE GHAWK50 FOR 50% OFF FOR THE FIRST 3 MONTHS LINK👉 bit.ly/3taEwov
Click here to follow us on Instagram
👉 / 3nmql8u
Link for Arc light Led 👉 arc-led.co.uk/
~-~~-~~~-~~-~
Please watch: "REDOING WORK TRADIFY"
• I Can't Stand Redoing ...
~-~~-~~~-~~-~ 
Хобби
A little tip when making channels in plasterboard. Put two blades back to back in the multi tool. Obviously it depends on the the size of the channel but can be useful now and again. Great video as usual 👌🏻
I use a cordless circular saw with thin kerf blade
Set right depth it’s fine
@@tristanedwards1340skillsaw
Pro tip, set your miter saw at zero, clamp a (empire) square to the fence-parallel to and flush with the blade. Now use the edge of the square parallel to the blade as your new fence, voilà, you can use your miter to cut those types of angles.
Switch position of the square from one side of the blade to the other for left or right angle cut. Also, you’ll notice the little corner of your square is notched at an inside angle almost as if it was designed to work perfectly with the blade on a miter saw for this. Google it if you’re having a hard time picturing.
Looks absolutely awesome! I hope everything gets better and better!
Can’t wait to see the final results, seems a very well thought out product.
Brilliant - thank you. Can you give me any advice on how to put LED strip at the top of my cladding above bath...the cladding has already been stuck on and fitted into a top piece, to make it even more difficult is the ceiling is artex so not smooth???
Looks great can’t wait to see in finished. Don’t forget to look after yourself.
Great job and update video. Will be awesome to see it when it is finished.
Look forward to seeing the finished product 👍👍👍
Looks nice ! You might’ve covered it so apologies if I missed it but how do you make the connections so that they’re not seen? I saw the wire at 8:14 coming out the end but what does that look like when finished, a blank plate housing the connections in the wall?
Looks good mate, what cable did you use for the colour changing light?
Where’s part 2?
do you know if there is a better price to order the channels other than aliexpress
Are these fire regulated? I also want to get these done but slightly afraid my house might fail building regs. So great video
Seems the sparks I follow all seem to create their own safety problems. You know those two top steps? Read the warning on the second step. It there for a reason.
Do not use the last two steps as you may fall. Look at 4:51, he is on the top step ( which has written on to "no step"), this is an easy point where a wrong lean will create momentum to make him fall.
So get taller ladders
Can you cut fire rated plasterboard?
Looks a smart install
What ever happened to Part 2??
Hi,
What machine are you using for the cutting?
Would you recommend fitting the profiles before plaster boarding or after?
After plaster boarding for me
Got the link for the led lights please?
I’ve got loads to do over the weekend I hate cutting it out
I was thinking if the metabo wall chaser could be adapted with tiny circular saw blades one pass two cuts with extraction system
They actually do a double blade for the metabo mate
@@GreenHawkConstructionltd circular saw blade type ? If you have link post it might justify spending. 900 on the whole system
Thank you
Cool!
Very impressive
Where do you put the drivers and controllers? Bury them in the wall?
No they are accessible in a control cupboard in the kitchen
Cracking job that, customers/people just don’t realise how much time goes into this sort of work is the biggest issue! Not had to tackle the plaster in stuff as yet but like the idea…..the strip I’ve used so far seems to have a 5m max length, how do you get round that/round all those bends also? Genuinely curious, I tend to find it fiddly stuff to work with 😂👍🏼
Yep this has a max run of 10m and we are will have to solder the bends in buddy 👍
Nice job. What csa and type of cable do you find best for long runs of rgbw led strip?
What is the tool used ?
Part 2?
Any update video coming?
Where's Part 2?
Nice video but you need to tell your guy not to stand on the top of the ladder at 5:14 it's not worth falling off and breaking your back or neck.
Just installed a load of this about 2 months ago in a home cinema/games room for a client...looks really good when dark and all switched on, the client was super happy with it. But I must say I don't like the look of it when they aren't lit up......just looks odd
Wheres part 2
Mikey... what happend to Jack's PPE when he was cutting out that plasterboard?
Them ear defenders won't protect his eyes or lungs... especially a day before he hopefully headed off on holiday. 🤔 Oh, and I won't mention his balancing act on the top run of them steps. 😂
Anyway hope he sorted his passport out and great video despite your bad day you we're having. Let's hope things improved since then.
Cheers 👊
Heck yes, mask, M grade vacuum, eye protection. Yes about the ladders, way too common.
Great vid, but wheres part 2 😂
I'm guessing these are from Ultra LEDs? You never put a link :)
No sorry buddy the links just been added don’t forget to tag us in when you purchase
@@GreenHawkConstructionltd ah I was looking at Arc LED as well. Cheers.
@@puntoboy_gt fantastic company to deal with tell them who sent you buddy 👍
arc led lighting in Plymouth
Hi mate can you please msg me company link i couldn’t find
Thanks
waffle waffle waffel just get to the point!
So you cut completely through the plasterboard? You do realise that the plasterboard is fire protection, so you are destroying the fire barrier?
so where part 2?
still waiting on that part 2. I'd like to see the finished result
Where are your other boys?
All on different jobs now buddy we run multiple jobs simultaneously at times
Dude you talk way too much and show barely some of the work.. les chitchat and more showing you work
To much chit chatting about other crap, just explain what we wanna hear!!!!
yawn
Part 2?
Where’s part 2?