Thank you, I was having trouble with the 2 liter bottle adapter and didn't know about the holes. Also I figured out that a problem I was having was the straw was too far down and was sucking against the bottom of the bottle not letting any water in.
Very much appreciate your video. Thank you! Purchased the whole kit and bottle adapter too!;-) Kindest regards from me, my car, and my mountain bike in rainy England.
I just wanna know if the adapter had any holes in it, he said a bunch of things but i'm not sure he touched on that.. and cleared it up. He may need to tighten the adapter too. 🤷♂️ hold on, let me watch the video again..
The catch is that piece isn't included that's why theres so many have hacked it I bought one on the box it shows that but guess what no extra but you can put a hole turn it upside p.s no one sells this in the store here so you have to buy it online
*******Make sure you put the washer in before you screw the 2 liter bottle adapter to the worx or the two little holes will be covered and the system will not work.*******
i guess worx.com is USA website, they don't ship to UK directly, I have checked with them even on their ebay account. there is a hack according to " kite Army", where you can make a small hole underneath the 2 litre bottle and keep the bottle upside down, Its only good if you don't have adapter which I am sure is hard to find.
Q A I don't understand why the WORX website would be USA only. Yes, the 2 liter or litre bottle adapter already has the vent hole in it. Maybe myself or someone else could 3D print them. I'm kinda busy so maybe suggest it or check Thingaverse or other 3D print sites.
Bought 2 of amazon just last week. www.amazon.co.uk/WORX-WA4038-Bottle-Adaptor-Accessory/dp/B071RBKMTX/ref=sr_1_5?ie=UTF8&qid=1528881539&sr=8-5&keywords=worxs+hydroshot
I don't know what you're cleaning. If you watched all my HydroShot videos you would see it does a pretty good job. It's not a pressure washer but it has a little more pressure than your garden hose. It also has the attachments like the soap dispenser, which makes soaping up cars and other things like patio furniture or siding.
Yes, it will be fine. Watch my videos, in one of them I quickly demonstrate how it cleans my siding. Remember, you still need to wash your car with a brush, sponge or rag. It doesn't clean all the dirt off, only loose dirt. Even a pressure washer only cleans loose dirt off. Like a shower, you wouldn't just pour soap on your head and just stand in the shower without scrubbing yourself. Loose dirt will come off but not the ground in dirt, although one of my videos shows the HydroShot removing algae from my vinyl siding by pressure alone without damaging it. Thank You for watching, I hope it works for you. Post a video using your HydroShot.
Thank You, I'm pretty good at it. I'll be doing more possibly. Just recently got my Creality CR-10 together and made some prints. Yesterday I just got my Creality LD-002R Resin Printer and a UW-01 Wash and Cure station and I still have yet to put together my CR-10 V2.
My Worx wasn't sucking water, and after watching your video, if figured it out. Thank you very much.
You are very welcome. I am glad it helped you out.
Thank you, I was having trouble with the 2 liter bottle adapter and didn't know about the holes. Also I figured out that a problem I was having was the straw was too far down and was sucking against the bottom of the bottle not letting any water in.
You are very welcome Matthew.
Very much appreciate your video. Thank you!
Purchased the whole kit and bottle adapter too!;-)
Kindest regards from me, my car, and my mountain bike in rainy England.
How many holes ?
I find. It a little low powered with the bottle adapter
i think it has 2 holes in it
not just regular 'ol holes, but little holes
I dunno. I counted at least eight. And three open ends on the straw.
I just wanna know if the adapter had any holes in it, he said a bunch of things but i'm not sure he touched on that.. and cleared it up. He may need to tighten the adapter too. 🤷♂️ hold on, let me watch the video again..
The catch is that piece isn't included that's why theres so many have hacked it I bought one on the box it shows that but guess what no extra but you can put a hole turn it upside p.s no one sells this in the store here so you have to buy it online
Yeah, I had to buy mine separately when I got it.
how many holes ?🙄
9,624. But you can't see them. Just 2 holes.
might make sense to put your product details in the "more" area for people that stumble directly onto this vid (like me). :)
*******Make sure you put the washer in before you screw the 2 liter bottle adapter to the worx or the two little holes will be covered and the system will not work.*******
My 2 litter bottle adapter is from works ,it has disconnect like hose . U dont take off adapter on washer.
i guess worx.com is USA website, they don't ship to UK directly, I have checked with them even on their ebay account. there is a hack according to " kite Army", where you can make a small hole underneath the 2 litre bottle and keep the bottle upside down, Its only good if you don't have adapter which I am sure is hard to find.
Q A I don't understand why the WORX website would be USA only. Yes, the 2 liter or litre bottle adapter already has the vent hole in it. Maybe myself or someone else could 3D print them. I'm kinda busy so maybe suggest it or check Thingaverse or other 3D print sites.
Cant find the bottle adaptor in whole UK
I just ordered one off of the WORX website. Send me your email or address and I'll ship it to you, no charge.
Send me your address to ship it to. My email is: f.matejaiii@comcast.net
frankmmiii Much appreciated ,i will send you email.
I am having the same problem? I can't seem to find it in the UK.
Bought 2 of amazon just last week.
www.amazon.co.uk/WORX-WA4038-Bottle-Adaptor-Accessory/dp/B071RBKMTX/ref=sr_1_5?ie=UTF8&qid=1528881539&sr=8-5&keywords=worxs+hydroshot
Just share the video with as many people as you want and have them subscribe.
frankmmiii thanks for this video!!!! I will give another chance to my hydroshot.......
Hi, any guys here know the actual size of the bottle adaptor? Thanks!
Hi... I need an advice please is this cleaner good I want to buy one but I don't know if ITA good for cleaning or no ... Please help!
I don't know what you're cleaning. If you watched all my HydroShot videos you would see it does a pretty good job. It's not a pressure washer but it has a little more pressure than your garden hose. It also has the attachments like the soap dispenser, which makes soaping up cars and other things like patio furniture or siding.
@@frankmmiii I'm going to use it in washing my car and why not I clean walls around my house ... Is that good?
Yes, it will be fine. Watch my videos, in one of them I quickly demonstrate how it cleans my siding. Remember, you still need to wash your car with a brush, sponge or rag. It doesn't clean all the dirt off, only loose dirt. Even a pressure washer only cleans loose dirt off. Like a shower, you wouldn't just pour soap on your head and just stand in the shower without scrubbing yourself. Loose dirt will come off but not the ground in dirt, although one of my videos shows the HydroShot removing algae from my vinyl siding by pressure alone without damaging it. Thank You for watching, I hope it works for you. Post a video using your HydroShot.
where do i get bottle adaptor. can u pls sent me link..
carl10_ 392 you can go to the WORX website. I just was there and saw it for sale at $6.99
www.worx.com
Talk about a repeat lol
This video should be only 2 mins long..tops.
What the hell are you talking about, I have the adapter with 2 holes and this thing does not spray well at all....
Maybe you're doing something wrong. I don't know I'm not there to hold your hand.
ok the problem is the screen washer it was stuck onto the other hose, it needs to be put on the bottle adapter
Way too repetitive. Good grief.
No shit. This fucking idiot needs to tell people there are 2 holes about 75 times.
2 - one on each side -
Watch the video. I say it 3 or 4 times.
How to cram a 30 second video into 4min 26seconds 😜.
Thank You, I'm pretty good at it. I'll be doing more possibly. Just recently got my Creality CR-10 together and made some prints. Yesterday I just got my Creality LD-002R Resin Printer and a UW-01 Wash and Cure station and I still have yet to put together my CR-10 V2.
No need. It's on the house. Just need an address to ship it to. My email is:
f.matejaiii@comcast.net.
Too much waffle sorry mate.