How to link your Fieldpiece probes with measureQuick

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии •

  • @mikemalone6103
    @mikemalone6103 Год назад

    This instructional video was far superior to other measureQuick videos I’ve seen in the past, because while your talking and clicking away, I have no idea what your doing. With this video, your pointing with your fingers and we can see what your doing. I got this kit and put red and blue tape for high and low on the system, and white for OAT and DLT. Great job and better clarity.

  • @DWAYNE2ism
    @DWAYNE2ism 5 лет назад +5

    Thanks mr jim bergman for continuing to educate the through the years

  • @Chaomhainn
    @Chaomhainn 3 года назад

    Thanks sir . You are well articulated with your presentation , nothing fancy of out of the ordinary language . I am re entering a re-education phase in HVACR field . When I tested for my Universal card years ago I was not educated on the computer for this occupation , not to mention the current tools and work pieces such as FieldPiece where not available at the time . The tools have been so greatly improved. I struggle with the computer concept technology today , I know enough but not efficient on it .

  • @mikeh423
    @mikeh423 5 лет назад +1

    What purpose does the discharge line temp clamp serve? I am about to buy a set of job link probes and want to get everything I need. If I do not get a third hydrometer can I manually input a temp into the field? Can you please make a link to where I can get the tee fitting tools? Thanks.

    • @measureQuick
      @measureQuick  5 лет назад

      THe discharge line should be watched for excessive discharge temperature. Discharge line temps above 180 are indication of inadequate compressor cooling. www.trutechtools.com/Accutools-S10767-Shrader-Depressor-Tool-1-4x1-4
      www.trutechtools.com/AVT45

  • @hozerhvac4406
    @hozerhvac4406 5 лет назад +1

    Great video Jim. Really want to get those darn fp probes but might wait until next year as I already have the testos

  • @andrewhicks6494
    @andrewhicks6494 5 лет назад +1

    Jim, did I hear you say on a video that you guys were working on a profile for general refrigeration on mq?

    • @measureQuick
      @measureQuick  5 лет назад

      Andrew Hicks Yes, we are wrapping things up now.

  • @DH-xj8xf
    @DH-xj8xf 5 лет назад

    Can you elaborate on the Appion Fittings you discussed. You said the Tee is used to monitor pressure and add gas to the system but you installed it on the Liquid side of the system. Should the Tee have been installed on the Suction side?

    • @measureQuick
      @measureQuick  5 лет назад

      D H that was a core depressor. Here is a link to the tee. The CPS is much less expensive, but not quite as nice. Still functions well though.
      www.google.com/amp/s/www.trutechtools.com/AVT45%3famp=1
      www.trutechtools.com/CTEE14

  • @kenmoses8
    @kenmoses8 4 года назад

    Been an Sman guy for the last 10 years. Haven’t switched yet, haven’t had a need. Just curious, do any of you guys just automatically have a T fitting always attached to you suction probe, so you can just hook up a jug straight through it if needing to charge?

    • @HaynesHandcrafted
      @HaynesHandcrafted 2 года назад

      When charging I hook up core depressor tool and then put a spare valve core removal tool on the core depressor. I then put my hose in the valve core removal tool side so I can control the refrigerant and the probe going on the other side of the valve core removal tool.

  • @UltraHydrophobiccoat
    @UltraHydrophobiccoat 5 лет назад

    Just bought a kit, and tested it today. I can see the temperatures and pressures at manager probes, but no live showing at Home button. Can you tell me what’s wrong with the settings? Thanks

  • @workinprogress4579
    @workinprogress4579 5 лет назад

    Quick Question: I've read that you do not want to put your thermometer directly in the supply plenum because you will pick up radiant temperatures from the coil. Does that also apply to the Fieldpiece psychrometers? Should you put the psychrometer in the supply plenum or farther down in a duct? Thank you

    • @measureQuick
      @measureQuick  5 лет назад +1

      Work in Progress out of line of sight of the coil always.

  • @mattluongo7763
    @mattluongo7763 3 года назад

    How's the battery life and recharge time for all the probes? In a standard day I'm checking anywhere from 4 to 6 systems and sometimes more. About how often will the set need recharging?

    • @user-jh1mq2ih2u
      @user-jh1mq2ih2u 3 года назад +1

      Go to filed piece website they give you that info… all he’s does is talk about the software and set up.

  • @Anton-du-Fleur
    @Anton-du-Fleur 5 лет назад

    I noticed the Bacharach combustion analyzer in there. I have a testo 310, does that communicate with the app?

  • @albertbeach9922
    @albertbeach9922 4 года назад

    Is there a way to hook up 2 pairs of pressure gauges to measure quick? I work on a lot of 2 stage equipment and want to hook up both stages at once. Is it possible?

    • @measureQuick
      @measureQuick  4 года назад

      Check out our latest video... Multi circuit mode.

  • @Michael-ig8ne
    @Michael-ig8ne 3 года назад

    How did you get that psychrometer to read outdoor air? Mine only do supply and return

    • @measureQuick
      @measureQuick  3 года назад

      Go to the toolbox and tap the psychrometer you want and map it to the ODA.

  • @superchickensuperchicken7939
    @superchickensuperchicken7939 4 года назад

    measureQuick, Jim I have the Fieldpiece SC660 wireless clamp on meter, do I need job link to link SC660 to Measurequcik toolbox, I clicked "add" and selected Fieldpiece and it scanned and it says no devices found?

    • @measureQuick
      @measureQuick  4 года назад

      We have not added in that meter yet. It is on the roadmap

  • @bbasham46
    @bbasham46 5 лет назад

    Hey Jim, thanks for creating the app however..my fieldpiece quick charge air kit does not seem to work anymore with your app. sometimes it shows all the data, other times(most times) it will not display all the data (example: the app no longer displays SH nor does the virtual gauges work) any thoughts?? and yes I have updated android as well as uninstalled the app and reloaded, thanks for any help.

    • @measureQuick
      @measureQuick  5 лет назад

      You need to go to the tool box and map your probes to the specific function.

  • @theairconditioningguy
    @theairconditioningguy 5 лет назад

    6:28 Could you post a link to that fitting with the shut off valve?

    • @measureQuick
      @measureQuick  5 лет назад +1

      www.trutechtools.com/Accutools-S10767-Shrader-Depressor-Tool-1-4x1-4

  • @easter543
    @easter543 3 года назад

    My liquid line is showing gray can't see blue green or red. How can I fix it. I have fieldpiece 4 piece kit with iPhone 8.
    Thank you

    • @measureQuick
      @measureQuick  3 года назад +1

      You need to add a probe to measure outside air temperature or for the short term manually enter it in the outside temperature in the “Outdoor Measurements” section. Tap the sun icon then “Outdoor Measurements”

  • @jesuss4437
    @jesuss4437 4 года назад

    Can you manually input the outdoor air?

    • @measureQuick
      @measureQuick  4 года назад

      Yes, go to the outdoor section and tap the square box and it will open up the manual input section.

  • @WreckingCr3W2
    @WreckingCr3W2 4 года назад

    Will measure quick work with Android or do you need a tablet/computer?

    • @measureQuick
      @measureQuick  4 года назад

      iOS or Android, phone or tablet. Free to download and use.

  • @26thanasis
    @26thanasis 4 года назад

    Dose it give u the cfm in the supply vent?

    • @measureQuick
      @measureQuick  4 года назад

      Thanasis Brotsis not out of the supply vent but total airflow yes.

  • @yellowzx7r
    @yellowzx7r 5 лет назад

    How do you get them to stay connected consistently even close range mine keep dropping out constantly and they are new with new batteries.

    • @hozerhvac4406
      @hozerhvac4406 5 лет назад

      yellowzx7r what are you is gonna for a device?

    • @measureQuick
      @measureQuick  5 лет назад

      What device are you using. This is not an issue we have ever seen.

    • @yellowzx7r
      @yellowzx7r 5 лет назад

      measureQuick IPhone 6s

    • @jordanmartirosian2956
      @jordanmartirosian2956 5 лет назад

      I have the same issue. iPhone X.

    • @MrBdogg317
      @MrBdogg317 5 лет назад

      I have an iPhone 8 and have the same issue. It also does it with my iPod 🤦🏾‍♂️

  • @theairconditioningguy
    @theairconditioningguy 5 лет назад +1

    Great info. I hadn't realized that they were numbered. Lol. I was just turning them on one at a time to identify. 😆 I think its due to my degrading eyesight.

  • @danielemerich8770
    @danielemerich8770 2 года назад

    I’ve been trying to sign up on MQ app, it’s give error message.

  • @JulesODwyer
    @JulesODwyer 5 лет назад

    After updating the software on these digital probes and clamps also the psychrometers now half of my instruments won’t Power On any idea how to reset and have these probes power back on tried removing battery’s and still will not power on on just 4 of my 8 probes

    • @measureQuick
      @measureQuick  5 лет назад

      I have not updated the software, they’re supposedly is two modes. One where you press and hold and the probes flash, and the other where the green light stays on continuously. The flashing mode is the standard mode. That is the one you should use. As I have not tested this myself it is only hearsay

    • @JulesODwyer
      @JulesODwyer 5 лет назад

      @@measureQuick I finally kept trying to get the 4 probes that actually said Update Complete but they would Not Power on So I kept holding down after the previous method of remove a battery and push power on and off for 20 seconds then put battery back in and went to app and said Update and pressed the power button turned Blue and Updated all 4 that would Not Power on they Updated and Now all 8 Probes do power on after updating go figure but it's weird if you go to Fieldpiece app still says 3 or 4 probes need updating but Not Updating any more must be a glitch in software or update but I think the Update is only for Logging if not let me know exactly what's in these Updates ?

    • @measureQuick
      @measureQuick  5 лет назад

      The update was for data logging, We did not do the firmware for the probes. You would have to contact FP for support on that.

  • @thealeons3179
    @thealeons3179 2 года назад

    Does anybody make an app designed for larger commercial process fluid Chillers? Also I think you should have a temperature reading for Hot Gas bypass. I also feel like you should have condenser Inlet temperature and condenser Outlet temperature.

  • @mjohnson6703
    @mjohnson6703 Год назад

    When I scan for tools, it never finds my tools. I'd love to try out the app, but I can't. It won't connect to my tools.

    • @measureQuick
      @measureQuick  Год назад

      What brand of tools are you trying to connect?

    • @mjohnson6703
      @mjohnson6703 Год назад

      @@measureQuick fieldpiece probes for tune ups

    • @measureQuick
      @measureQuick  Год назад

      support.measurequick.com/portal/en/kb/articles/fix-android-issues-with-measurequick-hvac-2-1

  • @workinprogress4579
    @workinprogress4579 5 лет назад

    I can't get my Galaxy A10e to connect with my new fieldpiece probes. I keep scanning and it says no devices found. Any ideas?

    • @rossr4222
      @rossr4222 5 лет назад

      But a new phone lol

    • @workinprogress4579
      @workinprogress4579 5 лет назад

      @@rossr4222 Thanks! lol

    • @measureQuick
      @measureQuick  5 лет назад +2

      Turn on your location settings for the app. Android requires location for Bluetooth.

  • @dahvacdahvac9061
    @dahvacdahvac9061 5 лет назад +1

    What's the link for the charging tee and apion tool

  • @biblebloopers946
    @biblebloopers946 2 года назад

    Nothing I do is able to connect my sensors to this app or to the fieldpiece app. I don't understand why my devices can't find it

    • @OscarSegundo
      @OscarSegundo 2 года назад

      I had the same issue, a comment suggested turning on your GPS. It resolved my issue

    • @biblebloopers946
      @biblebloopers946 2 года назад

      @@OscarSegundo
      Yes that's exactly what solved it for me as well. I turned my location on

  • @Rodzilla408
    @Rodzilla408 5 лет назад

    This fieldpiece kit is what I got. I use it with MQ.

  • @pepsiman90214
    @pepsiman90214 2 года назад

    My field probes do not connect to this or job link

    • @measureQuick
      @measureQuick  2 года назад

      What device are you using? We are hearing about this but it seems to be isolated to Samsung devices, specifically the Fold 3. We are thinking they may be having problems with their OS or hardware as it is not an application specific issue.

    • @pepsiman90214
      @pepsiman90214 2 года назад

      @@measureQuick 3 samsung galaxy models before this S22 and my current one which is S21 ultra. My probes worked on my previous comapny's work phone which was an iphone, and didn'tconnect to the personal phone stated above. Now it doesn't connect to my current phone which is the S21ultra. I don't understand how they can only be compatible with IOS devices. Lol don't tell me this is a conspiracy to have more people buy iphones.

    • @measureQuick
      @measureQuick  2 года назад

      @@pepsiman90214 I am really thinking an android update or OS is not up to par.

  • @lee-johnson
    @lee-johnson 5 лет назад

    Very nice.

  • @techfive7202
    @techfive7202 4 года назад

    The probes disconnect about 20ft away. I have to reconnect. So annoying

    • @measureQuick
      @measureQuick  4 года назад

      99% of the time it is because you are using a BT headset or earbuds. They both are bandwidth hogs and causes throughput issues.

    • @techfive7202
      @techfive7202 4 года назад

      @@measureQuick I don't use either..ever..I actually think its when the phone goes to sleep mode after a few minutes..

    • @measureQuick
      @measureQuick  4 года назад +1

      Arturo Bernal Tap the gear on the right hand side of the home screen, and select the keep screen awake setting.

    • @techfive7202
      @techfive7202 4 года назад

      @@measureQuick thanks I'm learning slowly how to use these. We are so busy right now its go go go!

  • @jakebrockey3429
    @jakebrockey3429 5 лет назад

    You can't add gas on the high side 😒

    • @measureQuick
      @measureQuick  5 лет назад +3

      I had to go through the video to see what you were referring to. Just to be clear, after servicing a system, if it is in a vacuum, you always add gas to the high side filling the liquid line and the condenser so you do not flood the compressor and or carry out the oil from dilution. Otherwise the port on the high side is used to remove refrigerant from the high side while the equipment is running. As that is a heat pump I am on the true suction so gas can be added in the vapor line when it is running.

    • @mikemalone6103
      @mikemalone6103 Год назад +1

      Should prolly have them on both sides. I always use a core depressor on the high side to balance the gauges and stop that annoying burst of gas. The problem with these depressors, is the O-ring is constantly falling out

  • @mountainmgtow5421
    @mountainmgtow5421 Год назад

    Doesn't work.

  • @blackishpariah
    @blackishpariah Год назад

    They broke the fucking app

    • @measureQuick
      @measureQuick  Год назад

      What is broken?

    • @blackishpariah
      @blackishpariah Год назад

      @@measureQuick I lost my original two refer probes. It's not allowing me to connect new probes at all

    • @measureQuick
      @measureQuick  Год назад

      @@blackishpariah support.measurequick.com/knowledge-base/android-issues-with-measurequick-hvac-2-1/

    • @measureQuick
      @measureQuick  Год назад

      This is likely it if your an android user. It is all about permissions.

    • @blackishpariah
      @blackishpariah Год назад

      Thank you so much for the follow up. You NAILED IT. App permissions.
      Your app is amazing btw - pls don't break