Basic Rules of Lapping in Beam Reinforcement Lapping zone in Beams
HTML-код
- Опубликовано: 7 сен 2024
- 1) Construction cost of 1000 square feet House 2019? Cost of House Construction per square foot 2019
• Construction cost of 1...
2) Grade Of Concrete and water Cement Ratio
• Grade Of Concrete and ...
3) How to calculate Cement, Sand, and Aggregate for M20 concrete
• How to calculate Cemen...
4) Depth of Footing/Foundation and Reinforcement details in Foundation
• Depth of Footing/Found...
5) Maximum distance between two RCC columns?
• Maximum distance betwe...
6) Big Mistakes in RCC Slab - Lapping Mistakes
• Big Mistakes in RCC Sl...
play Lists :
Construction Videos :
• How to Chose Good Qual...
Construction Site Visit :
• New Exterior Design fo...
House Planning Play List :
• How to Study Column wi...
#CivilEngineers #CivilEngineering
This is a special presentation and clear as day
Good video💯💯🇺🇸
Very clear explaination with illustration..great video n keep it up..👍
Useful video sir tq
Thank you very much brother... 🌻
Splendid! Another great video. Thank you for sharing this video. Greetings from Papua New Guinea. I am in process of building a 3 storey residential building & contemplating building a 7 storey commercial building later on next to each other on same portion of clayish soil with some rocks & your videos are beneficial! I wish to also build a 7 storey commercial building next to a lake that is inundated with water 3/4 of the year & other traditional houses in the vicinity are on stilts in the village what is your recommendation in terms of foundation, pillars, pylons etc thank you.
You discuss three coulumn A,B and C Sir splicing on beam from A to B using 12 dia and 16 dia B to C 16 dia what is the basis of lapping length on A to B using different 12mm and 16 mm
corrugated bar kindly discuss ill follow
Thanks for the great work
Are slabs and beams usually poured monolithically? Does that mean that all steel in the suspended slab is in compression where you lap after l/4, because the beams are the tension members and are so deep? Example, if you have 16 in beam plus 6 in slab on top, a total of 22 inches cross section, the top 11 inches is all compression and bottom 11 must be all tension steel?
Sir beam ki liye bhi banao please
Which is code we use sir
Bottom ma l! 4 ma overlap de sakte ha