The only thing I would change is swap out your multimeter to a clamp style, I dig the snap on driver. I imagine it can drive just as hard as the other impacts but that variable trigger seems nice. Nice set up bud
Nice HVAC kit. I have been in the "hot/cold" business my whole life and learned a couple of things from your video....like the single high side gauge. All you are missing is the amp meter and not sure that you showed a service wrench with hex adapter. Just food for thought!
Thanks bud. When I need to check amperage I just go to the truck and grab my fluke clamp meter. I just find that I don’t need to do it that often. I also don’t really need a service wrench in my troubleshooting kit because if I am using a service wrench, it’s most likely a bigger repair that I use the big tool bag for. That’s where I keep those. I’m glad you enjoyed the video and thanks for the comment!
I don't understand why an HVAC Tech would carry a meter than doesn't have an amp clamp. I use mine on every call that isn't just blowing out a clogged P-Trap or filter change.
MB2 is………..:meh. Got mine free years ago from Veto on a promo and have yet to really use it. The MB3B is a huge improvement and you can wield a 12v impact or drill on the side. Winner Winner IMO
Great video. Thank you for posting. This is a good example of how everyone’s experience with tools is different. I absolutely hate those Klein strippers and the ChannelLock crimper. They hang in the garage now. I keep a M12 Surge with every tool bag. But I’m totally on the Milwaukee platform so it makes sense for me. I love Fluke and have 4 or 5 of their meters and also I have 5 other meters from different manufacturers. I don’t know if id say the 116 is the best ever for hvac in my opinion.
Last Christmas Home Depot had the Milwaukee Fuel Gen 3 12 V impact driver for 99 dollars . It came with a charger and one Battery. picked it up and love it . I have the Fluke 116 and it's a very good meter , but doesn't amperage . I love the Fluke 325 . Have the 902 FC , but find it a little too big .
2nd year electrician apprentice. I absolutely love the m12 surge. All my tools have been m18 until recently I caved and got the m12 surge. I’m perfectly happy with my drill, hackzall and multi tool running on the m18 but I couldn’t go back to my m18 fuel impact. Obviously i will use it in some situations but a typical day doing fixtures, receptacles , switches and fans or whatever else I’m using little surge every time. I honestly feel like the m18 fuel impact is too strong a lot of the time. No matter what you do it will cam out like hell over and over sometimes.
Im with you on using a screwgun over an impact for the troubleshoot kit. I thought I was the only one clever enough to have a magnet onboard, I had no idea a snap-on battery magnet attachment existed. I use the milwaukee 4 in 1 installation driver, its inline.grip is so comfortable once you get used to the forward and reverse button. I use the 1/4" hex collet attachment 99% of the time, but having a drill chuck, offset, and 90° angle attachment in the bag has saved me a trip to the van more than once. I have to agree with you that the best feature is the grip length magnet on the d handle. I had it maxed out with about 15-20 screws on a rtu last week. Nice set up, but I gotta have an amp clamp.
Can’t go wrong with the Milwaukee. They are great tools and I have used them for years as well. When I do need to check amperage I just grab the amp clamp from the truck. I just find that I don’t need to do it that often, and I love the way the meter I have in this bag fits and works. Thanks for watching!
@@realworldtoolreviews yea to each their own I just feel like the knipex really bite into whatever they are grabbing with less force needed and my chanelocks seem to slip on me more. Both r great tho and have their own good and bad
Yea it wasn’t cheap but I did buy it used for half price but still super expensive for what it is. I don’t love all veto bags but this one is great and not as expensive as some of their other stuff. I would highly recommend it for what I use it for.
You know what would also be interesting to talk about is the type of ladder you use or think is the best for getting on roofs. Also, I'm surprised you don't mention anything about sun protection. I know there are a lot of guys who use mini umbrellas.
@11:30 -- lost the TWO insulated screwdrivers and get the Klein 2-in-1 (or the set that has the square drives too) with the flip around Phillips and Flathead - one less driver.
Great setup, I absolutely love the Channellock crimpers use them basically every day in my personal tool bag, i would also highly recommend a FLUKE 325 for a clamp meter, that and the 116 are the best combo for checking any piece of equipment
The only thing I would change is I would get on Milwaukee impact driver. Those snap on one suck compared to Milwaukee, which is better and cheaper with a better warranty
I use the same clips from Fluke also, nothing compares I have found, even ESI? My meter leads are only Fluke, even though I use a high end Extech clamp meter? I'm not taking any chances working on 480V 3-phase with garbage leads, never happen?
Don't care for the 6-1 Klein style needle nose, I only care for the front cut and crimper style like your Channel Lock's, also? Had an SK pair, but they got stolen when doing a job years ago?
Do you have any of the craftsman USA raised panel speed wrenches if not I would like to send you some to try to start a set of them love the channel keep it up
Chinese has the ability to make some good quality stuff, i think everyone thinks if it’s American made its superior when in recent years america hasn’t had the best reputation for great quality tools and to say veto is overpriced when literally anything that comes out of America is more expensive (and it’s not fair pay, you guys pay your waiters like 2 dollars an hour ) usa rebranding European tools and selling for 3x the price ( bacho ) and a little off topic but i seen new balance has some shoes that are labelled made in usa which are way more expensive but not any better american “made” products are overpriced
The only thing I would change is swap out your multimeter to a clamp style, I dig the snap on driver. I imagine it can drive just as hard as the other impacts but that variable trigger seems nice. Nice set up bud
I wont use a meter unless it has a clamp makes life so much easier
Nice setup! I'm diggin that snap-on screw gun. I've been missing your video's. A new baby says it all! Best wishes and thanks for the video.
Thanks bud! Yea the screw gun has really be a game changer.
Nice HVAC kit. I have been in the "hot/cold" business my whole life and learned a couple of things from your video....like the single high side gauge. All you are missing is the amp meter and not sure that you showed a service wrench with hex adapter. Just food for thought!
Thanks bud. When I need to check amperage I just go to the truck and grab my fluke clamp meter. I just find that I don’t need to do it that often. I also don’t really need a service wrench in my troubleshooting kit because if I am using a service wrench, it’s most likely a bigger repair that I use the big tool bag for. That’s where I keep those. I’m glad you enjoyed the video and thanks for the comment!
I don't understand why an HVAC Tech would carry a meter than doesn't have an amp clamp.
I use mine on every call that isn't just blowing out a clogged P-Trap or filter change.
@14:50 -- apparently Milwaukee is coming out with a 'rocker-trigger' screw gun soon....I'm hoping the rumour is true.
MB2 is………..:meh. Got mine free years ago from Veto on a promo and have yet to really use it.
The MB3B is a huge improvement and you can wield a 12v impact or drill on the side. Winner Winner IMO
Great video. Thank you for posting. This is a good example of how everyone’s experience with tools is different. I absolutely hate those Klein strippers and the ChannelLock crimper. They hang in the garage now. I keep a M12 Surge with every tool bag. But I’m totally on the Milwaukee platform so it makes sense for me. I love Fluke and have 4 or 5 of their meters and also I have 5 other meters from different manufacturers. I don’t know if id say the 116 is the best ever for hvac in my opinion.
Last Christmas Home Depot had the Milwaukee Fuel Gen 3 12 V impact driver for 99 dollars . It came with a charger and one Battery. picked it up and love it . I have the Fluke 116 and it's a very good meter , but doesn't amperage . I love the Fluke 325 . Have the 902 FC , but find it a little too big .
2nd year electrician apprentice. I absolutely love the m12 surge. All my tools have been m18 until recently I caved and got the m12 surge. I’m perfectly happy with my drill, hackzall and multi tool running on the m18 but I couldn’t go back to my m18 fuel impact. Obviously i will use it in some situations but a typical day doing fixtures, receptacles , switches and fans or whatever else I’m using little surge every time. I honestly feel like the m18 fuel impact is too strong a lot of the time. No matter what you do it will cam out like hell over and over sometimes.
Im with you on using a screwgun over an impact for the troubleshoot kit. I thought I was the only one clever enough to have a magnet onboard, I had no idea a snap-on battery magnet attachment existed. I use the milwaukee 4 in 1 installation driver, its inline.grip is so comfortable once you get used to the forward and reverse button. I use the 1/4" hex collet attachment 99% of the time, but having a drill chuck, offset, and 90° angle attachment in the bag has saved me a trip to the van more than once. I have to agree with you that the best feature is the grip length magnet on the d handle. I had it maxed out with about 15-20 screws on a rtu last week. Nice set up, but I gotta have an amp clamp.
Awesome set-up. I 'm going adopt some of your ideas.
The red gauge approach is really a game changer . Thanks for the articulate video.
Tsunoda KBN-150, 100 or 125, flush cuts are excellent for zip ties and come in 4, 5 or 6 inch sizes.
love your set up . i rock the Milwaukee 12 volt Gen 3 impact driver . It's so small powerful , has 3 speeds .oh what do you use to check amperage
Can’t go wrong with the Milwaukee. They are great tools and I have used them for years as well. When I do need to check amperage I just grab the amp clamp from the truck. I just find that I don’t need to do it that often, and I love the way the meter I have in this bag fits and works. Thanks for watching!
6 inch cobras over baby blues and I’d say that’s about perfect
That is a good suggestion, but I just can’t give up the baby blues in this bag. I’m too used to it 😂.
@@realworldtoolreviews yea to each their own I just feel like the knipex really bite into whatever they are grabbing with less force needed and my chanelocks seem to slip on me more. Both r great tho and have their own good and bad
$500 impact to take 3 screws out of an AC
That medicine thing is brillant, im going to do that too 😅
OUCH--- that snap on screw gun set ya back! --- That Veto is nice though, even at the price
Yea it wasn’t cheap but I did buy it used for half price but still super expensive for what it is. I don’t love all veto bags but this one is great and not as expensive as some of their other stuff. I would highly recommend it for what I use it for.
You know what would also be interesting to talk about is the type of ladder you use or think is the best for getting on roofs. Also, I'm surprised you don't mention anything about sun protection. I know there are a lot of guys who use mini umbrellas.
Trade fox umbrella
@11:30 -- lost the TWO insulated screwdrivers and get the Klein 2-in-1 (or the set that has the square drives too) with the flip around Phillips and Flathead - one less driver.
Great setup, I absolutely love the Channellock crimpers use them basically every day in my personal tool bag, i would also highly recommend a FLUKE 325 for a clamp meter, that and the 116 are the best combo for checking any piece of equipment
Id recommend switching to a open barrel crimper and heat shrink. No offense but it's alot better.
The only thing I would change is I would get on Milwaukee impact driver. Those snap on one suck compared to Milwaukee, which is better and cheaper with a better warranty
I use the same clips from Fluke also, nothing compares I have found, even ESI? My meter leads are only Fluke, even though I use a high end Extech clamp meter? I'm not taking any chances working on 480V 3-phase with garbage leads, never happen?
Don't care for the 6-1 Klein style needle nose, I only care for the front cut and crimper style like your Channel Lock's, also? Had an SK pair, but they got stolen when doing a job years ago?
Nice set-up for sure ... Thx
Thanks Eddy! You are the man.
I live in the south and my shop/garage is not insulated either. With the garage door open and some fans its just barely tolerable
You ever use the Mag jumpers for terminal blocks?
How do you check apps with that fluke multimeter?
Do you have any of the craftsman USA raised panel speed wrenches if not I would like to send you some to try to start a set of them love the channel keep it up
I never thought of carrying a small gauge like that.
I like the high pressure gauge I might add that to my arsenal once I’m a tech
U cant check amps though
The 8in1 is the real deal
Yer missing duct-tape and a coat-hanger.
Thats how us professionals, do it. 🛠🦆
Good point 😂
Whats the model on the drill?
Thank you Sir
Well thought out
Where can I buy the part’s container?
It’s a pill box. You should be able to get one at any drug store or Walmart
Dude take your leads off the meter. Geez.
Lol ain’t nobody got time for that
fam wassap w the vid schedule
I know dude. I’m working on it! I have a 4 month old kid and he is being super selfish and really taking away from my shop time 😂
@@realworldtoolreviews please come back to YT
I don’t care what everyone says about Veto’s bags… they are Chinese made and are overpriced
i love mine
They are great bags
Always a Mexican
Chinese has the ability to make some good quality stuff, i think everyone thinks if it’s American made its superior when in recent years america hasn’t had the best reputation for great quality tools
and to say veto is overpriced
when literally anything that comes out of America is more expensive
(and it’s not fair pay, you guys pay your waiters like 2 dollars an hour )
usa rebranding European tools and selling for 3x the price ( bacho )
and a little off topic but i seen new balance has some shoes that are labelled made in usa which are way more expensive but not any better
american “made” products are overpriced