*I just finished building the handrail on my deck **MyBest.Tools** and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!*
I appreciate that you shared these insights. My router is a Ryobi RE600. Over 30 years old and was made in Japan. It already has a screw for adjusting depth. But taking out a spring might make it run smoother. You provided some food for thought.
Здравствуйте!!! Отличный лифт. У меня такой же фрезер как у Вас. Всё собирался сделать лифт к нему. Теперь знаю как и обязательно сделаю!!!!! Спасибо за Ваше видео!!!! Мастер!! !)))))))
Une des meilleures adaptation réalisée sur youtube et je les ai pratiquement toutes visionnées !!! simple, astucieux, bon marché et facile à réaliser. Bravo !!!
complètement d'accord du grand art super et simple, robuste! J'ai une defonceuse X krtaft qui est une cousine proche de celle ci, je l'ai aussi mise sous table mais moins costaud je suis sans cesse ennuyé je vais moi aussi tenter de retirer un ressort... Bravo!
This is a valuable addition to my woodwork collection ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
I have just completed my router lift mechanism based on your approach, so thanks for the simple but effective way of raising and lowering the router in the table, it works well enough to be enjoyable
@@Maurice-24 столько городьбы непонятной, не о чем! Тупо фрезер снизу стола прикручивается через сквозные болты, без какой либо отдельной площадки, темболее без отдельных сменных накладок под диаметр фрезы, тупо отверстие в столе диаметром на 50 за глаза, а уж регулятор по высоте нах не нужен, можно про необходимости снизу под столом подрегулировать как надо....
I just finished building the handrail on my deck ruclips.net/user/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!
Шикарная идея! Только 2 замечания: шпильку можно закрепить не на клей , а на контргайку . И очень нужно доработать момент фиксации выбранной высоты вылета фрезы.
@@GRINwood У тебя даже на видео виден перекос фрезера при изменении высоты. Зря пружину одну снял. Лучше поставить 2 пружины, но послабже. Еще есть способ убрать люфт изменения высоты при повороте шпильки в противоположную сторону, но я думаю это тут не нужно.
@@Elhazarinn так перекос ещё сильнее будет, если поставить вторую пружину. сделал себе я точно так же, только намного проще. руки когда дойдут, сделаю красиво, как у автора. у себя на procraft pob1700 снял обе пружины (стоят сильные, видимо и слабом и легком pob1700 и в тяжелом и мощнее pob2400 ставят одни и те же) и поставил одну (в трёх городах обыскал в боле 15 мастерских по ремонту электроинструмента - не нашел ей замены и поставил последовательно две короткие от старой газовой колонки, благо есть знакомые газовщики). я ещё не ставил контргайку, фиксирую стандартным запирающим рычагом на фрезере а что там за мысль по поводу убирания люфта изменения высоты при повороте шпильки в противоположную сторону? можешь написать?
@@cosmosgolaktika5176 У меня на фрезере китайском изначально стоит 2 пружины. Я их так и оставляю. А насчет убирания перекоса. Я подъемную систему продублировал со второй стороны. Внизу они соеденены цепью. Идею подсмотрел на своем рейсмусе Калибр. Только там 4 механизма подъема стола по количеству стоек. Я сам механизм собрал уже, но стол пока ставить некуда, по-этому не сделал.
Nhìn đồ nghề của bạn mình thấy thích quá làm tới đâu có đồ nghề tới đó cảm ơn đã cho xem clip này. Bạn nên có thèm cây cọ nhỏ để quét chứ lấy tay phủi như vậy cái dăm cây nó đâm vào tay khó lấy ra lắm
@@kalimspecstroj Да ну нах... Разобрать пол фрезера, понапрдумывать какие-то коромысла... Просверлить кучу отверстий... Вмешаться в электросхему... И т.д. и т.п... А здесь всё просто и понятно!
Jestem Polakiem cześć . Bardzo fajne urządzenie jestem majsterkowiczem ale nie stać mnie na wiele urządzeń chciał bym mieć taki warsztat ale na razie mnie nie stać może w przyszłości będę miał .Dzięki za pokaz super pozdrawiam Mirek
Hello: I am still looking but I enjoyed how you made the band saw stand. Reminds me of 1955 when I built the dressers for my new wife and myself which were passed along to my children. Going to have to see if I can make the plans for the router lift work with my router. Now about the black push stick. Think I can guarantee that some day you will lose control and the piece being pushed will rise up and hit you in the face. There are much better push stick plans. Good luck
Ingenious and well executed. Great video and easy to follow and understand. Always wondered if there were people like me who like to combine woodworking and metalworking. Impressive skill set. Thanks so much
Now that's a cheap router lift! Nice work. I've been looking for the simple solution...even know I'm not st up to weld, I think I could make a similar solution with the tools I have. thanks for sharing!
Very clever. Now just use a brake cable from a bike with a cut off bolt and spring and you can then lock your router spindle from the outside instead of reaching under. Sure works in my head!!! Good job!!
You have given me a lot of inspiration with this video. You make it look easier than it is I'm sure. After watching other complicated and convoluted videos on how to use a plunge router in this manner I was coming up with an idea similar to yours. Now I know I was on the right track and you answered my question on how to get the bolt to the top of the table neatly and the absolute best way to attach it to the router. You have saved me hours of screwing around and hundreds of dollars. Excellent stuff thanks for your brilliance mate.
Просто и со вкусом! Годный вариант, если купить недорогой фрезер подходящий и под 12 хвостовик и конечно достаточно мощный. Только что регулировка оборотов под столом,если не вынести спереди.
#Kippschutz Habe bereits Deine Führungsschienen an meinem Siebeschlitten bei der Bosch GTS10XC im Einsatz und bin sehr zufrieden damit. Die neuen Führungsschienen mit Kippschutz finde ich klasse, da mir schon einmal mein Schiebeschlitten beinahe vom Tisch gekippt wäre. Mach weiter so👍
I really am a fan of creativity and this was a pleasure to watch! 👀😉Couple of points.. when welding ALWAYS use the correct MASK to protect your eyes or you will SUFFER! (from a condition called 'Arc Eye' ) It leaves the eyes dry and VERY painful.! 😨2. If the metal work puts you off you can often find someone to do it for you! (Thankyou bro😉) 3. Buy a cheap second hand but serviceable router if you don't want to use your 'not my precious'👀🤣 and 4. Whilst you are stripping it down look to replace ie the carbon brushes with new ones if needed though I would replace on a used router anyways?! Make sure the power cables etc is in good nick. 5. Don't forget to use a no voltage switch so that you can switch on and off the router rather than realize 'oh hell the ! switch is !! 😨👀👍 6. I often use a mix of superglue and baking soda to make sure anything I need to stick solidly is just that. 7. I use some of my partners 'sewing machine OIL ' for lube - works really good. 8.Consider buying a FOOT switch as when you put your foot on the switch it powers the router on and when you take your foot off it powers it down? For just a few $s? As said this was certainly an entertaining AND certainly worth seeing VID. 👍😉Stay safe, whoever, wherever you are !!
Denmark it where I am. Greetings, Arthur. I'm about to build my first router table, and watching so many DYI videos to find simple ways to build this and more to come, and watching all these videos I get to know about new tools and benches/tables I've never seen before and can't wait to start building and use for building! And the lift thing, ohh, they are either extremely expensive or way to complicated for me skills and tools to make. Until this video! Genious! (y) I know, I know, we live in a time where everything explained in letters must be said in max 2 lines! But I'm old--school and prefer one smart guy explaining meaningful and useful things in 30 lines, instead of reading 500-1000 people's max 2-lines comments where 99 % is useless comments, to mix 30 lines that make sense! I'm not just into reading but also writing "books" :) Actually, this time 2 lines, or even 1, would have been enough to ask my question: Can you tell me more about the superglue and baking soda trick? All new to me! Peace, love and safety first! :)
Sumptuously! Grandiose! The best of what I saw on this subject! Low bow! Thanks a hundred times! Already doing this to myself! Health, success and success, Master!
That is how you void the warranty of your router folks, well done!. By the way it look slick, tumbs up for that, but I won't ruin my new router that way.
*I just finished building the handrail on my deck **MyBest.Tools** and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!*
In Ukraine
The best designed router insert and lift I've seen on RUclips. Just great. Cheers from Queensland Australia!!
I appreciate that you shared these insights. My router is a Ryobi RE600. Over 30 years old and was made in Japan. It already has a screw for adjusting depth. But taking out a spring might make it run smoother.
You provided some food for thought.
Смотрю с удовольствием Ваши идеи и видео, продолжайте в том же духе. Спасибо. Здоровья Вам.
عمل جد جيد احترت كثيرا في كيفية صعود ونزول الآلة لكني وجدة في هذا الشريط الشرح الكامل اشكرك كثيرا واقدر لك هذا العمل 👍👍👍👍👍👍👍👍
What a simple design for lifting and lowering the router. Thanks for uploading. Best regards
Очень просто все и технологично лайк, прекрасная работа.
Здравствуйте!!! Отличный лифт. У меня такой же фрезер как у Вас. Всё собирался сделать лифт к нему. Теперь знаю как и обязательно сделаю!!!!! Спасибо за Ваше видео!!!! Мастер!! !)))))))
*One of the best router lifts I’ve seen.*
Une des meilleures adaptation réalisée sur youtube et je les ai pratiquement toutes visionnées !!!
simple, astucieux, bon marché et facile à réaliser. Bravo !!!
complètement d'accord du grand art super et simple, robuste! J'ai une defonceuse X krtaft qui est une cousine proche de celle ci, je l'ai aussi mise sous table mais moins costaud je suis sans cesse ennuyé je vais moi aussi tenter de retirer un ressort...
Bravo!
This is a valuable addition to my woodwork collection ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
Great work !
You have a clever mind, good eyes and hands.
You are si blessing !
Greatings from Romania, Mister !
This has to be one of the simplest router lifts I have seen built a great job.
I like the elegant simplicity of this design.👍
.
Thanks, I made one following your idea. Used a Bosch 1600 I picked up in the USA many Years ago, now it has a new lease of life.
Congratulations, it's the best diy router lift in the web
I have just completed my router lift mechanism based on your approach, so thanks for the simple but effective way of raising and lowering the router in the table, it works well enough to be enjoyable
Just wanted to say thanks this video help out a lot making my inserts, made the jig you did and worked like a dream
I love the use of laminate flooring for the work surfaces. Guaranteed no wrapping
The sliding system of the router has convinced me a lot. I have it now with a car hydraulics and it is very bulky.
Simple but effective.
Хороший вариант,но я бы не сказал,что он простой в изготовлении.есть варианты и по проще.ЛАЙК!
Тоже подумал, если это простой, то какой не простой?
@@Maurice-24 столько городьбы непонятной, не о чем! Тупо фрезер снизу стола прикручивается через сквозные болты, без какой либо отдельной площадки, темболее без отдельных сменных накладок под диаметр фрезы, тупо отверстие в столе диаметром на 50 за глаза, а уж регулятор по высоте нах не нужен, можно про необходимости снизу под столом подрегулировать как надо....
@@Maurice-24 внимательней прочитай его комент
@@Александр-с4н2е прочитал. Ну вроде как человек пишет, что не назвал бы стол простым вариантом. Я пишу, что согласен с этим.
I just finished building the handrail on my deck ruclips.net/user/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!
Great video. Your next investment should be a MIG welder (LOL). Like the use of paneling or flooring material for work surface, good idea.
Super job, this is the best solution so far. Everything looks solid!
Finally, a solid solution. I've seen so many videos with wobbly wood made mountings...
Very very nice router table. I like the use of flooring material!
Как будто мысли прочитали, я также планирую сделать лифт для фрезера, у меня похожей формы фрезер 👍
Шикарная идея! Только 2 замечания: шпильку можно закрепить не на клей , а на контргайку . И очень нужно доработать момент фиксации выбранной высоты вылета фрезы.
На видео не показал, но для фиксации вылета фрезы позже я добавил контрольный барашек на винт снизу и поджимаю когда необходимо
@@GRINwood У тебя даже на видео виден перекос фрезера при изменении высоты. Зря пружину одну снял. Лучше поставить 2 пружины, но послабже. Еще есть способ убрать люфт изменения высоты при повороте шпильки в противоположную сторону, но я думаю это тут не нужно.
@@Elhazarinn так перекос ещё сильнее будет, если поставить вторую пружину. сделал себе я точно так же, только намного проще. руки когда дойдут, сделаю красиво, как у автора. у себя на procraft pob1700 снял обе пружины (стоят сильные, видимо и слабом и легком pob1700 и в тяжелом и мощнее pob2400 ставят одни и те же) и поставил одну (в трёх городах обыскал в боле 15 мастерских по ремонту электроинструмента - не нашел ей замены и поставил последовательно две короткие от старой газовой колонки, благо есть знакомые газовщики). я ещё не ставил контргайку, фиксирую стандартным запирающим рычагом на фрезере
а что там за мысль по поводу убирания люфта изменения высоты при повороте шпильки в противоположную сторону? можешь написать?
@@cosmosgolaktika5176 У меня на фрезере китайском изначально стоит 2 пружины. Я их так и оставляю. А насчет убирания перекоса. Я подъемную систему продублировал со второй стороны. Внизу они соеденены цепью. Идею подсмотрел на своем рейсмусе Калибр. Только там 4 механизма подъема стола по количеству стоек. Я сам механизм собрал уже, но стол пока ставить некуда, по-этому не сделал.
Christ, that’s amazing.....and dare I say it, way beyond the ordinary DIYer’s skill.
simple, practical, and efficient... cleverly done.
One of the best router lifts I’ve seen. Also like the use of laminate floor boarding. Brilliant. . . You have a new subscriber.
True carpenters made the own tools.👍
What a great design, especially for the small home shops that don't have a lot of money. Thanks for sharing. The camera work is excellent too!
Nhìn đồ nghề của bạn mình thấy thích quá làm tới đâu có đồ nghề tới đó cảm ơn đã cho xem clip này. Bạn nên có thèm cây cọ nhỏ để quét chứ lấy tay phủi như vậy cái dăm cây nó đâm vào tay khó lấy ra lắm
Un capó, hace rato que estaba esperando a que alguien me diera está idea. Gracias
Лучшая конструкция лифта для фрезера из всех, что я видел.
ruclips.net/video/UQv6FCTefkQ/видео.html
@@kalimspecstroj Да ну нах... Разобрать пол фрезера, понапрдумывать какие-то коромысла... Просверлить кучу отверстий... Вмешаться в электросхему... И т.д. и т.п... А здесь всё просто и понятно!
Jestem Polakiem cześć . Bardzo fajne urządzenie jestem majsterkowiczem ale nie stać mnie na wiele urządzeń chciał bym mieć taki warsztat ale na razie mnie nie stać może w przyszłości będę miał .Dzięki za pokaz super pozdrawiam Mirek
Nice!. Clever idea of using router as lathe! Never thought that.
Thanks!
Отличное решение! Постараюсь повторить тоже такой лифт 👍👍👍
Dude has mad shop skills, nice work!
This is a great design. Many thanks for sharing!
Fantastic! No show, no endless talking. Just pictures, who speak for itself! So ist has to be! Go ahead!
Все супер дякую.
Парень, ты мастер своего дела!
Hello: I am still looking but I enjoyed how you made the band saw stand. Reminds me of 1955 when I built the dressers for my new wife and myself which were passed along to my children. Going to have to see if I can make the plans for the router lift work with my router. Now about the black push stick. Think I can guarantee that some day you will lose control and the piece being pushed will rise up and hit you in the face. There are much better push stick plans. Good luck
What a fantastic solution for the mounting of the router. And what a good idea to remove one spring. Thank you very much
That’s absolutely awesome
genius , I'm doing this tomorrow... thankyou
Esse é "fera". Parabéns, excelente. Saudações de São Paulo - Brasil.
Sehr geile Idee und Klasse Ausführung. Volle Punktzahl👍👍👍👍👍😎😎😎😎
Ingenious and well executed. Great video and easy to follow and understand. Always wondered if there were people like me who like to combine woodworking and metalworking. Impressive skill set. Thanks so much
It is good to balance out ones skills.
Now that's a cheap router lift! Nice work. I've been looking for the simple solution...even know I'm not st up to weld, I think I could make a similar solution with the tools I have. thanks for sharing!
Awesome built.
Спасибо за идею. Возьму на "вооружение".
Best idea for a router lift I've seen so far
Plus I do like your table saw technique, very safe, very sensible
Thanks for sharing
Very nice job. Thanks for the video. Take care.
So Wonderful !! Thanks~~
Bravo l’artiste ! Une solution simple, économique et bien présentée. Merci !!
Very clever. Now just use a brake cable from a bike with a cut off bolt and spring and you can then lock your router spindle from the outside instead of reaching under. Sure works in my head!!! Good job!!
Well done. Very cool. Lots of functionality without a table.
Very nicely done
Хороший вариант
спасибо 👍 👍 👍
Супер! Отличная идея. Ещё я удивлён, что в DWT в обоих направляющих стоят пружины, обычно Китай ставит одну.))
This is the best thing I saw this week. Awesome 👏
j'aime votre video, c'est parfait merci beaucoup .
Super Idee, den Fräs-/Sägetisch aus Paneelen zu bauen. Dein Lift für die Fräse ist auch klasse! 👍
sry, aber das ist nur Papier mit Lack
Beautiful job, thanks for sharing.
Thanks I was looking for this lifting mechanism ..but I need some few extra hole on my multi tasking table saw
Very nice solution
😳😱 tu et un génie 👍 merci 👍
Nice job, from America, U.S.A!
You have given me a lot of inspiration with this video. You make it look easier than it is I'm sure.
After watching other complicated and convoluted videos on how to use a plunge router in this manner I was coming up with an idea similar to yours. Now I know I was on the right track and you answered my question on how to get the bolt to the top of the table neatly and the absolute best way to attach it to the router. You have saved me hours of screwing around and hundreds of dollars.
Excellent stuff thanks for your brilliance mate.
Der liftbau ist ist zu umständlich, geht auch einfacher und schneller
@@dorisdreyer812 Wo finde ich die Anleitung dazu oder kannst Du uns das erklären?
What else is there to say but, BRILLIANT! What a space saving solution, so clever. Well done, and thanks for sharing this build with us all...
Well done! And so much cheaper than an expensive brand milling table insert module.
Greetings from Germany
Chris
That's the best Lift-Modification i have seen in month. Thoughtful, easy, cheap and perfect working. Great!
Просто и со вкусом! Годный вариант, если купить недорогой фрезер подходящий и под 12 хвостовик и конечно достаточно мощный. Только что регулировка оборотов под столом,если не вынести спереди.
Хорошая работа! Все детали подогнаны хорошо. Буду делать по вашему примеру. Спасибо!
Оказывается дело было в снятии одной пружины, спасибо)))
#Kippschutz Habe bereits Deine Führungsschienen an meinem Siebeschlitten bei der Bosch GTS10XC im Einsatz und bin sehr zufrieden damit. Die neuen Führungsschienen mit Kippschutz finde ich klasse, da mir schon einmal mein Schiebeschlitten beinahe vom Tisch gekippt wäre. Mach weiter so👍
I really am a fan of creativity and this was a pleasure to watch! 👀😉Couple of points.. when welding ALWAYS use the correct MASK to protect your eyes or you will SUFFER! (from a condition called 'Arc Eye' ) It leaves the eyes dry and VERY painful.! 😨2. If the metal work puts you off you can often find someone to do it for you! (Thankyou bro😉) 3. Buy a cheap second hand but serviceable router if you don't want to use your 'not my precious'👀🤣 and 4. Whilst you are stripping it down look to replace ie the carbon brushes with new ones if needed though I would replace on a used router anyways?! Make sure the power cables etc is in good nick. 5. Don't forget to use a no voltage switch so that you can switch on and off the router rather than realize 'oh hell the ! switch is !! 😨👀👍 6. I often use a mix of superglue and baking soda to make sure anything I need to stick solidly is just that. 7. I use some of my partners 'sewing machine OIL ' for lube - works really good. 8.Consider buying a FOOT switch as when you put your foot on the switch it powers the router on and when you take your foot off it powers it down? For just a few $s? As said this was certainly an entertaining AND certainly worth seeing VID. 👍😉Stay safe, whoever, wherever you are !!
WOW 😮 you can write books, bro! Thanks for tips! 👍
Denmark it where I am. Greetings, Arthur.
I'm about to build my first router table, and watching so many DYI videos to find simple ways to build this and more to come, and watching all these videos I get to know about new tools and benches/tables I've never seen before and can't wait to start building and use for building!
And the lift thing, ohh, they are either extremely expensive or way to complicated for me skills and tools to make. Until this video! Genious! (y)
I know, I know, we live in a time where everything explained in letters must be said in max 2 lines!
But I'm old--school and prefer one smart guy explaining meaningful and useful things in 30 lines, instead of reading 500-1000 people's max 2-lines comments where 99 % is useless comments, to mix 30 lines that make sense!
I'm not just into reading but also writing "books" :)
Actually, this time 2 lines, or even 1, would have been enough to ask my question:
Can you tell me more about the superglue and baking soda trick? All new to me!
Peace, love and safety first! :)
The best router lift I have seen, great idea thanks ☺️ will definitely try to build it.
Love the engineered materials. I use it for everything I can in my shop.
Wish I was as good as these people I see on RUclips
If I have a workshop like this, I sleep in it. Well done !!!
Very nicely done sir!
Sumptuously! Grandiose! The best of what I saw on this subject! Low bow! Thanks a hundred times! Already doing this to myself! Health, success and success, Master!
Very nice work and great video 👍👍👍
Sehr gut und einfach. Ich habe mir erlaubt den Lift nachzubauen. TOP ! Danke
Slickest homemade router lift I have seen! Great job.
DWT is suitable for this stationary use. The lock button has broken. And like detail clearly well done
Many thanks for your sharing of ingenuity, I finally validate an effective method !!!!!!!
Nice build. Well done
That is how you void the warranty of your router folks, well done!.
By the way it look slick, tumbs up for that, but I won't ruin my new router that way.
Very nice job
Brilliant mate, well done. 👌
Золотые у вас руки, мастер! 100 лайков!))) За каждое видео!
This is really great work. Thanks so much for putting it for novices like me to see.
Its level of completion is high degree. You made well to use in woodworking and It's higher quality than things in the shop👍👍👍
I’m so impressed and motivated to reproduce what you have done, I’ve been reluctant to purchase the units for hundreds of dollars. 👍🏻👍🏻👍🏻👍🏻👍🏻
Fantastic. Je vais m'inspirer pour faire le même.
Very good idea sir. very inspiring for carpenters and DIY hobbyists. always success sir...